Dodging Bankruptcy and the Crusher

Dodging Bankruptcy and the Crusher.

Joe Greeves – July 05, 2012 10:00 AM

Image
Image
Image
Image
Image
Image
Image
Image
Image

(Editor’s note: Shortly after this article was written and printed in Auto Enthusiast (July issue), John Guarnieri was killed in a traffic accident en route to a show with his Dodge in tow. Our sympathies are extended to the friends and family in the loss and it was our privilege to share John’s car and passion with our readers).

Financial bailouts of automobile companies have been in the news but shoring up the auto industry is not something limited to recent times.

This beautiful 1955 Dodge Custom Royal Lancer is proof that sometimes the infusion of extra cash can produce striking results. Almost driven to bankruptcy because of poor sales in 1953 and 1954, Chrysler was saved from collapse by a $250 million loan from Prudential and the talents of automotive designer Virgil Exner. In 1955, a beautiful collection of cars across the board became the result that put Chrysler solidly back into the Big Three.

The redesigned 1955 Dodge emerged from the makeover as a truly representative car of the ’50s. Positioned between Plymouth andDe Soto in the Chrysler lineup, the Dodge sported a six-volt electrical system, kingpin/leaf spring suspension, and 15-inch wheels. Six adults could ride in comfort and the trunk could hold their luggage.

Over-engineered with 20-quart cooling systems and six-quart oil capacities (sixes as well as V-8s) the engines ran on low octane gas and were trouble free. They were good looking cars then and still are today.

Enter John Guarnieri, a retired police officer and lifelong Mopar enthusiast living in St. Augustine, Florida. John is an active member of the Ancient City Auto Club and has owned 64 vehicles over the years. His involvement with this beautiful example began moments before it was headed to the crusher!

In February 2004, he and a friend were on a parts run when they drove past a junkyard in Lake City, South Carolina, surprised to see a distinctive tri-colored Dodge being pushed inside the fence. Except for rusted floorboards from a failed heater core, the car was complete and the body was pristine. A six-volt battery and a gallon of fresh gas brought the 270 Hemi V-8 to life, convincing John that the car had potential.

He learned that the car had been carefully stored for more than 25 years by the grandfather and his son, but the grandson got involved with drugs and never paid the storage fees. Knowing that the Custom Royal Lancer was the flagship car of the Dodge line, John stepped up like Prudential a half century before, intent on saving the car. He wrote a check for the storage fee, paid for a South Carolina title, and took the car home. As an unexpected bonus, the dealer threw in a second ’55 Dodge as a parts car. In all, John acquired five parts cars during the almost four year restoration.

After trailering the car back to St. Augustine, John’s first step was to get the brakes working properly and exercising the engine. Several trips up and down the highway and two oil changes later, the engine stopped spewing black smoke, a sign that it was time for the full restoration to begin.

Recalling the process with a smile, John says, “It only took two days to tear the car apart and 3½ years to put it back together!” The five parts cars and new old stock items located on eBay gave John everything he needed to complete the project. He accomplished much of the work himself, overhauling the engine on his own and rebuilding the transmission with help from Danny Novello at American Transmission in St. Augustine.

John also redid the brake system, refurbished the gas tank, added a new YnZ wiring harness, and located five Goodyear 7.10 x 15 tires with 2¾ inch whitewalls. The correct combination of Jacquard fabric and Cordagrain vinyl was sourced in Canada and installed by Old City Upholstery in St. Augustine. Several other local experts added their talents, like Tony Puleo at A&R Auto Electrics, along with staff members Jimmy and Charlie, who handled the rebuild of the car’s electrical components.

Boyd’s Glass located and installed new tinted glass and Rick’s Mufflers fabricated the new exhaust system. Tony Castellano polished the stainless steel and Space Coast Plating of Melbourne, Florida, did the chrome. John’s good friend, Hamlet Smith from Palm Coast, Florida, helped in reassembling the car and John’s wife Lynda hand-painted the hubcap spinners, gauges and related pieces.

The refurbished 270 Super Red Ram V-8 came equipped with Hemi heads and a two-barrel carb, producing 183hp. A rare Power Pack option was available from the factory that added a four-barrel Carter carb and dual exhausts, good for an additional 10hp. John’s car is equipped with a two-speed PowerFlite transmission, complete with a unique dash-mounted shift lever. (Those famous Chrysler pushbuttons appeared the following year.) Chrome trim separated the colors on the door panels. Gauges span the width of the dash and on John’s car. The eight-tube pushbutton radio has an optional rear speaker.

Unique colors were part of the mid-’50s experience and Dodge certainly brightened the landscape, taking 13 basic colors and expanding the choices with 16 two-tone combinations. Newly introduced in 1955 were 16 more three-tone combinations. If 45 choices still weren’t enough for you, upper colors, insert colors, and lower colors could be switched, providing a staggering 76-choice color palette. John’s colors of Regal Burgundy Metallic, white, and black were colors that often appeared in Dodge brochures, making them a sought after combination. Handling the spray gun, Billy Walters from Jacksonville, Florida, shot the chassis and accomplished the unique tri-color paint job.

Saved from bankruptcy by Prudential and the crusher by Guarnieri, the Dodge justified their faith beginning in December 2008 when the car was presented to the judges. The hard work and long hours were rewarded with a Junior Award at AACA’s ’08 Winter Meet in Lakeland, Florida. The Senior Award followed at the 2009 AACA Spring Meet in Charlotte, North Carolina.

The following year, John trailered the car to New Bern, North Carolina where it won again, taking home an AACA Grand National Award. John hopes the car will obtain its Senior Grand National Award at the 2012 Grand National Meet in Shelbyville, Tennessee.

When that happens, it will be a genuinely happy ending for an almost bankrupt car once headed to the crusher.

DREAM GARAGE: Classic Car Barn

Seriously!!!!!! Some Stable!!!

Some of the cool items in this classic car dream garage.Some of the cool items in this classic car dream garage.

______________________________________________________________________________

Chuck has customs, trucks and of course, muscle cars in his collection.

This dream garage houses not only classic muscle cars but also real show horses.

Automotive enthusiasts love to measure their beloved four-wheeled machines’ capabilities by using the term “horsepower.” Chuck Barnes owns a stable-full of true classic muscle — real horsepower — in his modern horse barn.

A few years back, this Barrington resident built a free-standing barn to house not only his family’s show horses, but also his personal vehicles, each packing enough stallions under the hood to intimidate even the brawniest of V-8s.

While Barnes sees beauty in his collection, the “huge eyesore” of a horse barn initially caused some friction between he and his wife.

“She used to be able to have a wonderful view from our kitchen of the animals grazing in the pasture,” Barnes said.

Despite the earlier conflict, Dawn Barnes has grown accustomed to the structure and even enjoys it now. “It’s true he blocked my view, but I’m over it. It’s such a wonderful place to have parties in,” Dawn said. “In addition to hosting a wedding in the barn, I’ve even had my own ‘women’s parties’ where I just invited my female friends to hang out.”

To be fair, Chuck did try to avoid obscuring the tranquil vista; he first added to the home garage, expanding it from two cars to accommodate four.

“It just wasn’t quite enough,” Chuck said. That’s when he began construction on the satellite structure, drawing on personal experience for inspiration. “In the ’50s, my dad owned a speed shop called Belmont Automotive in Palatine. As a kid I used to go hang out there all the time and would see some really neat cars.”

That passion manifested itself in the cool space Chuck spends most of his time in now. “All the memorabilia is stuff I’ve accumulated over the years. Even with millions of dollars, you can’t recreate this. Nothing here is bought out of a catalog. They’re real pieces — even the moose head!”

In addition to car parts, hand-painted signs and neon lights, the custom centerpiece is a wood-paneled bar that a cabinetmaker friend assembled. “We told him we wanted something as cool as the cars, so he made the countertop one large glass shadow box, illuminated by LED lighting.” The couple constantly changes the display, ensuring guests will see something new.

The entire building has air conditioning to keep things comfortable during the summer months and a special warming element for the bone-chilling Midwest winters: radiant in-floor heat. ”You can walk in here in February with bare feet and be nice and toasty,’ Chuck said. “In addition to efficiency, it also keeps moisture down and doesn’t kick up dust or dirt.”

Naturally, visitors don’t come just to see the fascinating décor, but also the rolling iron parked inside. One such creation is a 430-horsepower 1970 Chevrolet Chevelle, packing a full emission-compliant LS E-Rod crate motor.

“It has full catalytic converters and passes the very strict California emissions test that will be mandated for all cars in 2014,” he said.

Other interesting pieces are a 1960 Buick Electra 225; a mint, 11,000-mile one-owner 1978 Ford F250 High Boy; and a project 1957 Chevrolet Nomad that came from Australia.

“I’m going to add an air-ride suspension and a fuel-injected big block. It’ll be a high-end car that can be driven anywhere.”

Another ongoing build is a 1964 Chevrolet Impala, being built as a tribute to Chuck’s father. “It’ll be a period-correct superstock race car that will be raced in nostalgic events,” he said.

While this equine palace is packed, Chuck is already planning for future expansions to his stable of steeds. So the next time you hear a classic collector talking about his impressive horsepower numbers, ask him if he’s got it both under his hood, and under his roof.

Automotive enthusiasts love to measure their beloved four-wheeled machines’ capabilities by using the term “horsepower.” Chuck Barnes owns a stable-full of true classic muscle — real horsepower — in his modern horse barn.

A few years back, this Barrington resident built a free-standing barn to house not only his family’s show horses, but also his personal vehicles, each packing enough stallions under the hood to intimidate even the brawniest of V-8s.

While Barnes sees beauty in his collection, the “huge eyesore” of a horse barn initially caused some friction between he and his wife.

“She used to be able to have a wonderful view from our kitchen of the animals grazing in the pasture,” Barnes said.

Despite the earlier conflict, Dawn Barnes has grown accustomed to the structure and even enjoys it now. “It’s true he blocked my view, but I’m over it. It’s such a wonderful place to have parties in,” Dawn said. “In addition to hosting a wedding in the barn, I’ve even had my own ‘women’s parties’ where I just invited my female friends to hang out.”

To be fair, Chuck did try to avoid obscuring the tranquil vista; he first added to the home garage, expanding it from two cars to accommodate four.

“It just wasn’t quite enough,” Chuck said. That’s when he began construction on the satellite structure, drawing on personal experience for inspiration. “In the ’50s, my dad owned a speed shop called Belmont Automotive in Palatine. As a kid I used to go hang out there all the time and would see some really neat cars.”

That passion manifested itself in the cool space Chuck spends most of his time in now. “All the memorabilia is stuff I’ve accumulated over the years. Even with millions of dollars, you can’t recreate this. Nothing here is bought out of a catalog. They’re real pieces — even the moose head!”

In addition to car parts, hand-painted signs and neon lights, the custom centerpiece is a wood-paneled bar that a cabinetmaker friend assembled. “We told him we wanted something as cool as the cars, so he made the countertop one large glass shadow box, illuminated by LED lighting.” The couple constantly changes the display, ensuring guests will see something new.

The entire building has air conditioning to keep things comfortable during the summer months and a special warming element for the bone-chilling Midwest winters: radiant in-floor heat. ”You can walk in here in February with bare feet and be nice and toasty,’ Chuck said. “In addition to efficiency, it also keeps moisture down and doesn’t kick up dust or dirt.”

Naturally, visitors don’t come just to see the fascinating décor, but also the rolling iron parked inside. One such creation is a 430-horsepower 1970 Chevrolet Chevelle, packing a full emission-compliant LS E-Rod crate motor.

“It has full catalytic converters and passes the very strict California emissions test that will be mandated for all cars in 2014,” he said.

Other interesting pieces are a 1960 Buick Electra 225; a mint, 11,000-mile one-owner 1978 Ford F250 High Boy; and a project 1957 Chevrolet Nomad that came from Australia.

“I’m going to add an air-ride suspension and a fuel-injected big block. It’ll be a high-end car that can be driven anywhere.”

Another ongoing build is a 1964 Chevrolet Impala, being built as a tribute to Chuck’s father. “It’ll be a period-correct superstock race car that will be raced in nostalgic events,” he said.

While this equine palace is packed, Chuck is already planning for future expansions to his stable of steeds. So the next time you hear a classic collector talking about his impressive horsepower numbers, ask him if he’s got it both under his hood, and under his roof.

Engine Line Up for 1946 Chrylser

Now 1946 generally wasn’t that exciting as far as new car models.  The war just ended and the many of the car manufacturers were recovering from the wartime conversion, they had a lot of Uncle Sam’s money, but no much time to make “new” tooling for creating new sheet metal.  So many of the cars were just spruced up.  Chrysler was not different.

Their main offerings was the Royal series, Windsor series, the Saratoga series and the New Yorker series.  The Royal cam in 3, 6 and 8 passenger and a Limo!!!  The Windsor came in 3, 6, 8 passengers and the Town and  Country  tossed in there was a 2 door convertible.   The Saratoga came in 3 and 6 passenger and the New Yorker came in 3 and 6 passenger and the Town and Country 4 door and 2 door convertible.

1946 Convertible

46 Royal

There engines were basically 6 cylinder and 8.

The Royal and Windsor engines was an L6.  It had a cast iron block with a bore and stroke of 3.438 x 4.5.  It displaced 250.6 cubic inches and had a compression of 6.6:1 (not huge when the shipping weight was 3,000 plus).  It was able to produce 114 hp and sported four main bearings, solid lifters.  It was topped with either the Fluid Drive (B-B VE1 – Ev2) or Vacumatic (E7L4) carb.

The Saratoga and New Yorker had an L8.  This engine too, had the cast iron block, but displaced 323.5 cubic inches and sported a bore of 3.25 and a stroke of 4.875 inches producing 6.7:1 compression.  With the 5 main bearings, solid lifters and topped with B-B E7A1 carb could produce 135 hp.

L8 Engine (49 but still the same engine)

 

Thanks for reading.

Tim

Murdered-Out Twin-Engined Death Rod Is Insanely Beautiful

What a piece of work.  Enjoy this from Rod Authority.

By Salvatore Alaimo, posted on Feb 14, 2012 in News
 http://www.rodauthority.com/news/video-murdered-out-twin-engined-death-rod-is-insanely-beautiful/

In some cases, a slew of random images just don’t do a build any justice. Case in point, this well-done footage of Yannick Sire’s dual-engined, open-wheeled speed machine. As a gearhead, you’re probably well aware that the birth of hot rodding was nurtured from the sunny west coast of Southern California. It’s there you’ll find custom rod builders like George Barris and the infamous S0-Cal Speed Shop.

Following along in their footsteps, Yannick Sire is not only taking inspiration from those before him but indeed, pushing it beyond most peoples comfort levels. We couldn’t help but post such an amazing build. Although this might not run bottom 11s at the track or clip an amazing lap time during an autocross course, its pretty awesome.

If this doesn’t inspire you, we aren’t quite sure what will. For the most part, we’ll let the video do most of the talking on this one. West Los Angeles rod builder, Yannick Sire has reinvigorated the West Coast’s tradition of radical street rodding with his full-custom hot rod, a hybrid creation of many different parts from different cars.

Sire, is truly an inspirational genius. Sire even hand-crafted each of the 16 individual header tubes himself.

The real trademark, however, of Sire’s custom rod are the two, 450-horse Chevy small-blocks, both outfitted with a heavy-breathing set of Air Flow Research (AFR) cylinder heads. Not only does this combination sound amazing, its equaling out to fire-breathing 16 cylinders.

Sire’s wheel choice consists of a 20 x 9.5-/20 x 10.5-inch front/rear combination from an ’02-’03, BMW X5. The Continental tires are P275/35R20 and P315/35R20, respectively. The front suspension uses custom, unequal length A-arms with second-gen Camaro, two-inch drop spindles.

Since slowing down is just as, if not more important, Sire upgraded the braking system to 14-inch Corvette Z06 on all four corners. Stering is handled by a Subaru STI rack-and-pinion. At the front of Sire’s V16 rod are a set of QA1 coilovers with a rate of 650 lb/in, and the completed vehicle weighs in at an estimated 2500 pounds.

For the last several years in the performance craft, we’ve had made the general statement that there are two ways to make any car or truck go fast: make it lighter or else more powerful. In the case of Yannick Sire and his 16-cylinder hot rod, both principles have been exercised to the absolute extreme!

Image credit: GTSpirit.com

Czech – Tatra T87

I love reading about cars. While reading a book entitled “CAR WARS” by Mantle, I ran across some interesting cars. So I thought I’d toss down some notes on them see what you think.

The first one was called the Tatra T87 and it was actually a Czech car, built in the city of Koprivnica. During WWII it was occupied by the Germans. Stories have it that the V8 was too much for the German officers could handle and “so many were killed the German high command” ordered the factory to stop producing the cars.

After the war of course the Russians, by agreement with the Allies, got control of the Czech country and had the Tatra T87 produced. The Tatra painted in Russian colors were used to smuggle out scientist from behind the Iron Curtain. Part of the agreement with the Allies was that each party was allowed to drive from Austria to Czechoslovakia freely. The West German intelligence would transport the “specially painted” T87’s in an enclosed van and then unload them, grab the scientists and drive back to Austria in Tatras painted with Russian colors unchecked.

So what the heck did this cars look like? What were the spec? Take a look!!

The finned T87

Image is from the Lane Motor Museum

It was powered by technically advanced 2.9 liter air-cooled overhead cam V8 produced 85 hp, and had a top speed of over 100 mph. (Image from the Lane Motor Museum)

So I’m thinking a need a fin for the Mustang!!!!

Thanks for reading.

Tim

Happy 4th of July 2012

Freedom starts as a dream, then a desire, then a want,  then a need, then a right, but it requires action and sacrifice to obtain.

Thanks to all those that came before us.

Car Production Numbers. They Made How Many? 1946

Fresh out of WWII the America car industry was facing the challenge of converting back to peace time auto production.  This as a huge task and the pressure was on, because if the average American owned a car there was a good change (50%) that it was 9 years old or older and needed replacing.   Materials were still in short supply, money wasn’t and to ensure that stayed the case most of the car company merely refreshed their 1942 cars.  Toss in labor issue and you can understand how tough the  situations was.

Ford lead the 17 manufacturers that year with 468,022 units produced. Chevy followed second with 398,028 cars. The others followed as such:

Plymouth – 264,660        Dodge – 163,490

Buick – 153, 627                Pontiac – 137,640

Olds – 117,623                    Nash – 94, 000

Hudson – 91,029               Mercury – 86,608

Chrysler – 83,310              DeSoto – 66,900

Packard – 30, 793             Caddy – 29,214

Studebaker – 19,275         Lincoln – 16,465

Corsley – 4, 99

1946 Crosely….not much to look at for sure but it did sport a 4 cylinder power plant.

I’m betting they meant to build this:

Thanks for reading.

Tim

1962 International Pickup….Sort of!!!!!

Come on at least give his body work a “D-” for trying!!!  Is this considered car art?
By: Jen Dunnaway
Posted On: 6/22/2012 9:47AM

SuzyBruisy

Artlessly spliced together in Brundelian fashion for some unfathomable purpose: an Olds Alero nose, an ’62 International pickup cab, and a Grand Am rear. The result resembles a FWD GM with some kind of terrible goiter. It’s one thing to build a tasteless and terrible pickup conversion, but what are you supposed say when the builder used the wrong part of the pickup? Strangest of all, the seller is asking for, and seems to believe that he will get, $3000 for this abomination because he has “probly twice as much invested.” I suspect that someone is about to learn a hard life lesson. See the ad on Craigslist, via Hooniverse.

for sale 1962 international truckcar, has every optional that a car could have ,has frontwheel drive driveline disk brakes all around , has air bags that are in working order has oldsmobile dash with tilt cruise , power seats , air -did work but i low of freon due from setting -can drive it anywhere, every light works as well as new cab lights allready has grandam door handles installed and work great, has alloy wheels and this truck has a good title which is titled as a international, has a grand am rear with the original duel exhaust, car is fuel injected and there are no check engine lights on?everthing is in working order but the aircondition is low of freon call if interested to much to list lots of time put in this car , have to many other projects to ,do so call 606 456 xxxx -no emails please -price is firm -have probly twice as much invested .-this vehicle will be sold where is as is…thanks

1923 American

I’m finishing up the my piece on Mustang Muscle in the Mid 70’s I thought you might enjoy this form Olds Cars Weekly.   (www.OldCarsWeekly.com)

 

By Brian Earnest

At the age 89, it seems Susan Manherz’s friend Bud has managed to outlive all of his siblings and immediate family members. During his advanced years, Bud didn’t see many members of his clan, but there were a few of them around. As late as the 1970s, he had at least two other close relatives still kicking.

These days, though, Bud is a true octogenarian orphan, at least until a long-lost kin comes out of the woodwork. Bud is only a car — a 1923 American — but the way the Manherz family talks about its colorful personality, you’re not so sure.

“If you look at him, it looks like the car has lips!” Manherz joked. “He just has personality. You know, sometimes when you’re looking for a car and you see one, it’s like, ‘That’s the one.’

“I know it sounds crazy to some people… He’s a little cantankerous at times. And he can be difficult. That’s why he’s Bud. He’s just a car with a lot of personality.”

The 1923 American touring became an official member of the Manherz family back in 1990 when Susan and her husband, Mike, stumbled across the car at a now-defunct collector car dealership in Gaithersberg, Md.  The couple hadn’t been looking for any car in particular, but the idea of a 1920s car sounded appealing and “my husband has an uncanny knack for sniffing out old cars,” according to Susan.

“I think the man had traded in three cars for a new Jaguar, and the American was one of them. We looked in the door and just saw the top of this touring car that stuck up above everything … of course they were closed that day, but the next day we went out there and we just kind of nabbed it then. We took him for a test drive and he needed some tinkering and stuff, but we knew right then that we wanted him.”

At the time, the couple had no idea how rare the car was or that they might never see another American. When they began doing some homework on their own car, and the American brand, they soon discovered that Bud was pretty much one of a kind. “In the 1960s there were three Americans known to exist, and all the owners knew each other,” Manherz said. “One was an earlier car that wouldn’t look anything like ours. It had a painted radiator shell and it was smaller. We haven’t been able to track it down. The man who had it died in the early ’70s and nobody knows what happened to the car. The [third] car was the same year as ours, but it was pretty much a parts car. It wasn’t complete. The guy who had it sold it, I know, and we’ve never found out what happened to it.”

Much to their delight, the Manherzes have been able to find out plenty about their own American, however. They are the fourth owners and they have been able to retrace much of Bud’s tire tracks prior to 1990.

“It was purchased new by Frank Ritter on June 9, 1923, from Adams Motor Company of Rochester, N.Y.  We still have all the original manuals and correspondence that came with the car when new,” Manherz noted. “Each owner of the car knew the previous owner. I know the original story of how the second owner got the car, and his son is still living and I talk to him on the phone… He bought it in 1955 and it had been up on blocks since 1930. The car was always in New York until we bought it, so he’s lived his whole live where it’s cold.”

There have been many car-building companies with the patriotic “American” moniker in their titles. One of the more successful early ones was the American Motor Co. of Plainfield, N.J. The company built cars from 1916 to 1924 and was also called American Six and American Balanced Six. Louis Chevrolet was vice president and chief engineer of the company during its early days, and in 1918 the Americans carried an “O.K. Chevrolet” signature badge to show that they had passed muster with the boss.

The company merged with the Bessemer Truck Corp. in 1923 and became the Passenger Car Division of Bessemer-American. That arrangement didn’t last, however, and the company quit building automobiles in the spring of 1924.

American was known mainly as a builder of solid, medium-priced cars with six-cylinder engines. The first offering in 1917 was a simple five-passenger tourer, but by 1923, five models were on the menu, including the big five-passenger tourer priced at $1,850.

American began calling its machines the “Smile Cars” in 1920, claiming that the cars provided millions of miles of happy motoring in the three previous years. Or maybe it was because the funky split front bumper resembled a mouth with a set of prominent lips. 1920 was also when the company introduced its 249-inch Hersehell-Spillman six-cylinder engine that provided 60 hp — a very respectable output for a middle-tier machine at the time. That figure grew to 66 hp when a 289-cid version of the Hershell-Spillman six was introduced two years later.

The wheelbases also grew to 127 inches and by 1923 you could get artillery wheels painted to match the body, or wire or disc wheels. According to Manherz, the cars were offered with a 25,000-mile “Around the World” warranty.

“Our car is an American model D-66 with the 66-hp, six-cylinder, 289-cubic inch motor.  It has a 3 ½-inch bore x 5-inch stroke, and there is a Kellogg tire pump mounted on the transmission,” Manherz said. “We still have all the original manuals and correspondence that came with the car [when new].”

The second owner gave the American some needed repairs and TLC back in the 1950s and took the car on the 1955 and 1963 Glidden Tours, according to Manherz. The third owner purchased the car in 1965.

The Manherzes have never given the American a complete restoration, but they have worked hard to keep the car looking nice and running well — which hasn’t always been easy. Most of the leather in the window-less tourer is original. New carpets and a new soft top were installed in 2009. Following the 2009 AACA Fall Meet in Hershey, Pa., where the American got its Senior Award (it had earned a Junior Award earlier at Gettysburg), the couple had the valve seats and springs redone.

Susan, who gets most of the seat time in Bud, noticed the difference immediately after the valve work. “I always drive it. He’s my boy,” she laughed. “After we did the valve job, he’s full of power! It’s actually kind of scary. He’s running on all six and he’ll snap your neck back … When you think about it, it was a pretty powerful car for that time. The only drawback is the two-wheel brakes. You’ve gotta remember with all that power, you gotta stop! But it’s a fun car.

“It drives pretty nice, yeah. It kind of drives like a limo, or a crew cab truck. It has a big turning radius, but it truly is enjoyable to drive. What’s neat is that big fat steering wheel. You can really grip it. It’s fun.”

The Maryland winters are certainly milder than Januarys in Rochester, so these days the American is pretty much a year-round machine. Its owners are not shy about taking it out on any day of the year when rain isn’t in the forecast. That sometimes means bundling up with an extra hat or sweatshirt, but Susan insists that the car is comfortable even on chilly days. “Hey, with those side curtains you don’t get cold!” she joked. “Actually, on the carburetor it has a thing that you can turn so you’re not sucking in outside air. You’re just running off warm air from the manifold and he stays pretty happy that way.

“He likes it better when he gets out every two weeks or so. He’s never really put away for the winter. I have an oil pan heater in the winter to keep the oil heated up. Otherwise we put cardboard up by the radiator and we go out … It seems like if the atmosphere is humid or anything you’ve got to fiddle with the carburetor and if you don’t have it just right, he’s going to be finicky changing gears, or wanting more gas. You can usually tell before you leave the driveway how he’s going to be!”

The couple also has a 1937 Packard touring sedan and 1953 Packard convertible, “and those cars get driven,” Susan said.

The American makes regular appearances at cars shows in its area and participated in the 2007 AACA Vintage tour for cars born before 1928. Mostly, though, he is a Sunday driver, rolling easily around the local neighborhood with that familiar shiny mouth in front and smiling passengers inside — even if it’s a little cool outside.

Not many people who see the car probably realize it is the ultimate orphan, the last survivor of an obscure breed. He’d probably look great in a museum somewhere, or lined up alongside other ultra-rare survivors of various ilks. As far as the Manherzes are concerned, though, he’s a permanent member of their family, and he’s not going anywhere.“Oh, we’ve had lots of people [try to buy it],” Susan said. “No, he’s not for sale. You figure, I could never get another one. If he was gone, he’d be gone for good.

“And his personality grows on you. He’s part person.”

Car Show in – Rothrist, Switzerland

Remember a few post ago that covered MOPAR’s in Sweden? (Short Link:  http://wp.me/pKHNM-174)  I wrote how interesting it was to see US sheet metal in other countries.

Well check out this car show in Rothrist, Switzerland.  This is from Andres Palomares who lives in Bern, Switzerland.  There are some great examples of US car history in this show.

Switzerland is beautiful and visited Interlaken several times while living in Europe.

Thanks for reading.

Tim