More work on my 73 Mustang’s shift lever. I have the pan off and removed the valve body. You can get a good look at the what needs to happen next.
Here is the bolt pattern for the valve.
The dots show the bolts to remove.
Over on www.7173Mustangs.com one of the experts modified a open end wrench like this:
We’ll see what I can find to remove this nut. That will be coming up shortly.
Thanks for reading.
Tim
#ProjectSportsRoof
1973 Mustang – Project Sports Roof – Vacuum System Part II
Thanks for checking on #ProjectSportsRoof. So here is the last set of initial questions. Here is an image of the current set up: Any diagram I find has the hose vacuum from the Distr going to the Valve assy. The Valve assy has nothing attached which is located on the front …
Project SportsRoof Shifting Linkage Part II
Thanks for checking back in on #ProjectSportsRoof. My 73 Mustang doesn’t what to get it in gear so I have to troubleshoot the shifting linkage. For this round, I’m putting in new bushings to remove the slop when shifting. Here is the video: I’ll be tightening up the shift lever and linkage to …
Project SportsRoof Shifting Linkage Part III
Welcome back to Project Sports Roof (#ProjectSportsRoof). The struggle is real!!! You saw in the last video my replacement of the linkage that was lost by the repair shop (along with my new battery and started). This repair shone the light (as often happens with older cars) on a previous …
Wrenchin’ Tip – ’70 Mustang Transmission Swap
As I get ready to start the new round of mods for my 1970 Mustang Coupe, I’m reminded of a couple of issues that came up when I was assisting a fellow Mustang owner doing a trans – transplant. The first tip is partially dependent on what stage you are in …
