Tag Archives: Project BeepBeep

Restoring Tach for 68 Road Runner – Project BeepBeep Part IV

By | | , , , , , , , , , ,
2 Comments

Finishing up the rare Tach option project for #ProjectBeepBeep. Another great tip in this one.

Here are a couple photos of BeepBeep’s Tach:

 

Here is the wrap up video.


Thanks for reading!!

Tim

Restoring Tach for 68 Road Runner – Project BeepBeep

Bill gets “techie” in a “tachful” way as he restores the rare Tach option on his 68 Road Runner. #ProjectBeepBeep     More coming up!!! Thanks for reading!! Tim #ProjectBeepBeep #ProjectSportRoof Project BeepBeep – 68 RoadRunner – Body Bumpers Kit Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a …

Restoring Tach for 68 Road Runner – Project BeepBeep Part III

By | | , , , , , , , , , ,
Leave a comment

We are back with #ProjectBeepBeep. Bill continues give some great information on his MOPAR’s rare tach option.

There is a great section in the video with a great tip for protecting your electronic dashboard components.


Thanks for following the progress. Part IV coming up.

Tim
#ProjectBeepBeep
#ProjectSportsRoof

Restoring Tach for 68 Road Runner – Project BeepBeep Part II

By | | , , , , , , , , ,
Leave a comment

Welcome back to Project BeepBeep. It’s been a bit of time since I posted the first part of Bill’s Tach project so here is a quick link to Part I and Part II is below.

Bill shares his diagnosis on #ProjectBeepBeep’s Tachometer.

Lots more coming up on Project BeepBeep’s tach.

Thanks for following along!!!

Tim

1968 Ply Road Runner
Project BeepBeep

Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels.

Take a look:

 

 

Great stuff!!!  Thanks Bill!!!

Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site.

Thanks for reading
Tim

 

 

 

 

 

 

 

 

Introducing …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep.

Bill is working on finishing up the brake conversion. Here is a progress update.

Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner.

If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.

 

 

Next up an …

Restoring Tach for 68 Road Runner – Project BeepBeep

By | | , , , , , , , , , , ,
Leave a comment

Bill gets “techie” in a “tachful” way as he restores the rare Tach option on his 68 Road Runner. #ProjectBeepBeep

 

 

More coming up!!!

Thanks for reading!!

Tim

#ProjectBeepBeep

#ProjectSportRoof

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …
Project BeepBeep – 68 RoadRunner Disc Brake Conversion – FINAL CHAPTER!

Welcome back to the #ProjectBeepBeep.  We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner. Did I say this is the final chapter?   Well….     Sometimes during a project you just can’t afford the time to do a video, especially when you have a friend …

 

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Wrap Up

By | | , , , , , , , , , , ,
1 Comment

So you can grab a couple more tips for Valve Cover Gaskets installation and you get to hear BeepBeep running like a top….love that engine music!!!


Some great tips and one more project down for Bill and BeepBeep!!

Coming up next an update and #ProjectSportsRoof and BeepBeep gets tachy (get it?….not Tacky but Tachy!!!)

Thanks for reading.
Tim

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Part II

By | | , , , , , , , , , , , , ,
Leave a comment

Bill gives some tips on cleaning up the valve covers and tries valve cover studs.


Wrap up of the valve cover gasket replacement is up next.

Thank for reading.

Tim

#ProjectBeepBeep

 

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn. More coming up …

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted. Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …

 

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Part 1

By | | , , , , , , , , , , , , ,
Leave a comment

Continue following Bill’s journey to a “Leak Free MOPAR” for his 1968 Road Runner. #ProjectBeepBeep

Wild E. Coyote is back!!!  Apparently he’s been working at Summit Racing!!!!

BeepBeep is getting some new valve cover gaskets!!!!  But will that stop the leaking?!?!?!?!

 




 

More coming up.

Thanks for reading/viewing.

 

Tim

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

 

 

Project BeepBeep Get’s Even Cooler – Part Two

By | | , , , , ,
1 Comment

Welcome back!!!

After finding a leak in the radiator, Bill decided to replace the it with an after market unit.

Here is Part Two of the process.

 


More coming up with Bill’s warp up of the radiator swap for his 1968 Road Runner!!!

 

Thank for reading.

Tim

#ProjectBeepBeep

#ProjectSportsRoof

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …
Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …
Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …
Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …
Project BeepBeep – 68 RoadRunner Disc Brake Conversion – FINAL CHAPTER!

Welcome back to the #ProjectBeepBeep.  We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner. Did I say this is the final chapter?   Well….     Sometimes during a project you just can’t afford the time to do a video, especially when you have a friend …