1960 Chevrolet Impala

I love this Impala and I don’t care that it has 4 ways to get in!!!!!!

By Angelo Van Bogart

Chevrolet built 497,048 four-door sedans in 1960. No one knows how many of those sedans were Impalas, Bel Airs or Biscaynes, but you can bet the farm that many went to rural America.

Determining how many 1960 Chevy sedans went to farmers is likewise impossible, but John Broucker isn’t concerned about that figure. What he’d really like to know is how many of those 1960 Impala sedans were equipped with a 348-cid V-8 and a four-speed manual transmission like his central Ohio sleeper ordered new by a farmer?

“I called General Motors and all they could tell me was how many were four-door sedans,” he said.

Chevrolet was not particular about the details of its production in this era, but Broucker’s car is certainly rare. Maybe even as rare as hen’s teeth. Broucker himself had a hard time believing the car’s combination when he first heard about the four-speed Impala sedan in 1980.

“The farmer that bought it new, I worked with his sister’s son, his nephew, and he said, ‘My uncle has a 348 four-speed,’ and when I [saw it], I said, ‘That’s a four-door.’ My buddy said it can’t be, it just can’t be, so I called the guy and I bought it.”

Even after buying the car from the original owner, and running into a mechanic who watched the car get unloaded at Progressive Chevrolet in 1960, Broucker sometimes has to defend what some people assume is a clone.

“Honestly, if I was going to clone a car, I wouldn’t clone a four-door ’60 Chevy,” he said.

That still begs the question: Why does a four-door 1960 Chevrolet Impala four-door sedan with a 250-hp Turbo-Thrust 348 and a four-speed with Posi-Traction even exist?

“Back then, if your buddy drove up to you in a four-door four-speed, you’d say, ‘You’re crazy,’” Broucker admits. “But he said he didn’t like the Impala (hardtop), it had the big back window, and he wanted a ‘fooler.’”

For the full fooler (a.k.a. “sleeper”) effect, the original owner even ran little hubcaps and blackwall tires to help the finned Impala fly under the radar. Aside from its performance options, the Impala is otherwise a typical farm sedan and generally lacks creature comforts.

“It doesn’t even have the rear-view mirror on the outside,” Broucker said. “It does have an AM radio, a heater, and the only thing that doesn’t work is the clock in the dash.”

With only 56,000 miles on the odometer, the rest of the Impala works as new, and Broucker said it remains largely original.

“It still has the original clutch,” he said. “I put front brakes and maybe a fan belt on and that’s about it. It has the original paint, original interior and original chrome. Sometimes, people look at the bumpers and say they’re a little wavy, but that’s they way it was. It even has the original generator, and the right rear tailpipe has a couple holes, but it’s the original exhaust.

“Behind all of the six tail lights, they have those little plastic cups on them. These are still on there. Any time anyone changed a light they threw them away.”

The unrestored Impala shows so well, it’s even placed second at the Stan Hywet car show in Akron, Ohio, against restored cars. Broucker believes the car’s excellent level of preservation is partly due to how the original owner stored the car.

“This farmer also worked at the railroad, and [he and his brothers] brought cabooses home and they made garages out of them,” he said. “I bet the thing was 3 feet off the ground and the wood floor helped preserve the car.”

When Broucker first saw the Impala, it was wedged in one of those cabooses.

“It was a real tight fit,” he said. “There was a pot belly stove in the caboose and I don’t know if he used the stove or not. They say the wood doesn’t sweat, it absorbs the moisture.”

The storage served the Impala well through 20 years and 50,000 miles with the original owner. Today, Broucker remains thrilled with the Impala’s condition. However, he hasn’t always found the car thrilling, which is why he’s only added about 6,000 miles to the odometer in his 32 years of ownership.

“Back then, I bought and sold a lot of cars, and for some reason I just held on to this,” he said. “I did think it was neat at first — I just thought it couldn’t be real, but it was. Honestly, I think I kind of lost interest and wondered, ‘Why did I buy a four-door?’ Then I would take it out and drive it and think, ‘This drives pretty nice.’ I was really happy with that.”

Many vehicles have come and gone from Broucker’s collection, but the Impala has been a mainstay. In fact, Broucker has pared his collection down to a 1969 Dodge Dart he races in the 1/8 mile and this oddly optioned Impala. That raises the question, would he ever race his Impala?

“I have [thought about it], but I might be embarrassed by it,” he said. “It has a lot of torque, but the point I am at, I don’t want to tear up the clutch.”

Instead, Broucker is content to blend into the car show landscape, making his Impala blend into the sea of hobby cars. For those collectors who enjoy the unusual, stumbling onto this rarity is like finding treasure. Maybe as exciting as finding that needle in the haystack.

From http://www.oldcarsweekly.com

Ford’s Windsor and Cleveland Engines Prt II

Ok, so one engine plant is located in Canada and the other Ohio.  What else is different?

The 351 Windsor (biggest displacement of the Windsor family  – which included the 289 and 302) had a beefier block than the Cleveland, which in theory allowed for more abuse and longer life-span.

The Windsor also came first in the history  being used from 1969 to 1998.

The Cleveland was used from 1970 to 1974 (much, much shorter run), with 1971 bringing 351 C Cobra Jet.

Unlike the Windsor the Cleveland had canted multi-grooved valves.  It also required larger rounded intake and exhaust ports.

There is another major difference and that was how the engined were cooled.  No we aren’t talking water vs. air (these weren’t VW engines) we are talking about water flow.

Like the 289 and 302 the 351W used a front cover and water existed the intake manifold face of the cylinder head through intake manifold to the radiator.  The 351C don’t have the front cover.  The block is extended and the covered with a flat stamping.  Water existed the combustion face of the head and into the block and then to the radiator.  This is important to note, particularly for me.  Why:

The Cleveland and Windsor heads are interchangeable only with modifications to the water passage.  I currently have a set of 351C Cobra Jet heads to put on my Windsor family 302.  I’ll have to have those mods done when I have the heads rebuilt.

Not the same location as the 302 Windsor.

There you have the basic differences between the Cleveland and Windsor families.

Thanks for reading.

Tim

Ford’s Windsor and Cleveland Engines

I have a Ford and as I’ve said before, though the years (ok….40’s, 50’s and 60’s) they produced some of the more interesting cars with  some of the most powerful engines.  Of those engines the Cleveland and the Windsor were major players.

I’m not alone thinking that the only real difference between the two were the names each being made in the plant they were named after.  The Windsor was named after the Essex Engine plant in Windsor,  Ontario and the Cleveland Engine Plant in Ohio.

 

1914 Photo of the Essex Engine plant in Windsor, Ontario

 

Totally different plants  and countries about the only they had in common was displacement.

What were the differences?   That’s coming up.

Thanks for reading.

Tim

Auto Factoids for Week of Oct 9 2011

O.K.  These are back, enjoy.

 

10/12/1950  Kaiser-Frazer Built their 500, oooth car.

There ya go...the 500, 000 th

 

On 10/13/ in 1902 Packard Motor Car Co. was formed from the Ohio Automobile Co.  Of interest: In September, 1900, the Ohio Automobile Company was founded as the manufacturer, while the cars were always sold as Packards. Since these automobiles quickly gained an excellent reputation, and there were more automobile makers that produced — or at least planned to — under the label “Ohio”, the name was changed soon: On October 13, 1902, it became the Packard Motor Car Company.

 

1902 Packard Model F

 

An Ohio

 

The very next day 63 years later Oldsmobile debuts the Toronado (10/14/1965).

1965 Toronado I want one of these

 

On 10/15/1945 Oldsmobile began creating producing per war cars.

And  1924 on the 15th of October, one of my hero’s was born.  The proud Poppa  of the Mustang and savior of Chrysler Lee Iococca was born in Allentown, PA.

 

Thanks for reading.

Tim