Tag Archives: Mustangs

Mustang Project Guy’s Slice of Heaven

By | | , , , , , , , ,
12 Comments

“Honey…I found our next vacation spot..hear they got a  nice Motel 6 nearby!!!”  “Honey…can we  go now?!!! The Turkey will keep until next week!!!”

Photos: World’s Largest Ford Mustang Salvage Yard

Posted by on November 21, 2011 – 2 Comments

salvage 8

Everybody knows that saying “I’ve died and gone to heaven”, and this applies to most enthusiasts in this junkyard full of old decrepit Ford Mustangs. Especially, the project guy that has an old classic sitting in the garage. I’m sure it could go either way, though, as some might consider this a sore sight with so many wrecked and rusted ponies. This is the Colorado Mustang Salvage Yard.

Soooo, anybody down for some campin’?!

Colorado Mustang Specialists, Inc. began in a two-car garage in 1972. Mustangs were as numerous as hippies on a Boulder park lawn, easy to buy, fix and sell. So, a would be University of Colorado student found a lucrative way to pay his rent and tuition. After graduation the diploma went in a drawer and the horsing around got serious. Wrecked, junked and abandoned Mustangs were cheap and plentiful, so the collection started that eventually led to the worlds largest Mustang salvage yard.

Most recent and exciting to us is the addition of modern fuel injection conversions, for 64-1/2 to 85 models. These conversions and related parts let the novice enthusiast bring his early Mustang into the new millennium with a computer driven, fuel-injected, V-8 power train, meeting todays standards without changing the Mustangs classic design. We predict these conversions will open a fun and exciting new era of Mustang enthusiasm.

Mustang Upholstery Front Seat Finale

By | | , , , , ,
2 Comments

So what I’ve I been doing lately car-wise?

Finishing up the front seats of Mustang and putting them back in the car.  Yes, I know I should have gotten all the new carpet and the heat and sound deadening but  I didn’t.  They are easy enough to remove so not really a big deal.  I did notice while the seats were out just how thin the carpeting actually was, there is nothing between it and the floor pans, I’ve got to get those done…soon…soon.

Here’s some shots of the final production.

Drivers seat

 

Passenger's Seat. This is the one I just finished.

 

 

 

Tim

When New Technology Meets Old Cars

By | | , , , , ,
6 Comments

When you work with and/or drive classic cars there is a never ending battle between old school and technology. Do I leave the points and condenser in or do I go all electronic? Do I update the suspension with coil-overs or go with stock suspension? Upgrade the interior to cloth or go with the vinyl? Many of us face those battles all the time. But there’s one clash between old and new that we just can’t to anything about and that is when new non-car technology clashes with old cars.

Back in ancient times the man went out to gather or kill something to bring home for dinner. That hasn’t changed much, especially in my household. Every week I strike out into the jungle to visit the local gatherers’ spot and cart home something for dinner. The only killing going on is my checking account balance.

Today was the day for our weekly shopping, so I fired up the ’70 Stang and headed out, ready for the hunt. After I was done scouting for “sales” and had enough provisions to last seven moons, the clerk (oh, they don’t call them that anymore…’associate’ is the correct term) took my hard earned provisions(HEY!!!..its tough shopping at the mega grocery – carts speeding around like herds of prehistoric lizards, tar pits of jelly on the floor, ill tempered rival tribes in the gourmet isle…yeah…it’s tough!!), stuffed them in to about 20 plastic bags and dumped it all into a cart. On the way out of the store a couple of clerks….excuse me…associates…said have a ‘nice day’ and ‘thank you’, as I tried to push the squared wheeled cart to the parking lot and my car.

 

As I popped open the trunk on the Mustang, I remembered the floor of this cavernous opening is covered with the new vinyl (original material) I installed a few months back and nothing else (I don’t carry a spare for drag strip purposes and it wouldn’t work with the tire size anyway). I looked at the contents of the squared wheeled cart and realized that by the time I got home, my gatherings will be all over the place, even if I didn’t drive like I normally do. If I tied them shut, the bags are still going slide everywhere, including into the quarter panel wells, creating a dripping plastic bag full of wine that just moments ago were grapes.

My next option was putting the bags inside, on the vinyl bench seat in the rear and the on front bucket set. Still the vinyl was going to let everything slide side to side and drop down on the floor.

 

Then I remembered back to when I shopped with my mother as a kid and the vinyl seats in our old Chevy Biscayne. The saving grace there were the old school paper bags that stood up straight and were packed heavy to stay in place. Their square shape allowed for the use of effective load master techniques that kept them on the seat or upright in the trunk. Then I thought,”I should have gone with the cloth over the vinyl.”

Thanks for reading.

Tim

Thanks for reading.

Tim

Muscle car

Muscle car is a term used to refer to a variety of high-performance automobile s The Merriam-Webster dictionary defines muscle cars as ” …
American Muscle Car

about muscle cars . Each episode provides a timeline of each vehicle’s history beginning with its first year of production to its most …

The Art Of Design – Creating The Mustang Of The Future

By | | , , , , ,
6 Comments

The Art Of Design – Creating The Mustang Of The Future.

Posted by on August 23, 2011 – Viewed 440 times – 4 Comments

yasiddesign Ford_Mustang_concept_REAR___yD

14Share

Some people are visual creatures and some are more in tune with the mechanics of life. I am a visual creature. The shape and colors of things are what I see first. So the whole idea of designing and drawing cars just fascinates me. Since this is a Mustang enthusiast website, thinking of what the next Mustang will look like is a mini obsession of mine.

Back in September of 2009, I started following a blog on the design of the new Mustang for 2014. And what appeared on that blog just blew me away.

Now I realize that Area 51 exists for more than just concealing a crashed alien space ship. It is also a test area for military vapor ware that we may see 20 years or so after it is new, you know, after it becomes obsolete and is no longer top secret. Well, getting a glimpse into the design studios of a major car company is like getting a tour of Area 51. You may see things that amaze and confuse and things you may have thought only existed in someone’s twisted imagination.

So how would it feel to get a whole truck load of sketches of the 2010 Mustang, drawn by one of the designers, just months after the new design was introduced? Yeah, it was pretty special. Rob Jensen was one of the designers of the 2010 Mustang, specifically, the GT500. Now, maybe you have seen these sketches before. Maybe they amazed and confused you back then, as they were way too “artsey” for a production car. But some parts and pieces of them made it onto the 2010 cars and some of them were left on the drawing board, literally.

For the Mustang Enthusiast in the crowd that leans towards the visual, stunning design side of cars, please enjoy the collection of sketches in our gallery below. Some are from Rob Jensen, some are from others on the Ford Mustang design team. Still others are designs by professional artists and amateurs that put together some very impressive Future ‘Stangs.

One thing to keep in mind, if you are seeing it here, out in the open, then most likely it looks absolutely nothing like the next Mustang will look. Think of this as the Area 51 Museum of Mustang design. If you like something you see, give the artist some love as I will try to provide links to as many of the artists as I can. If there is another artist out there that we need to know about, definitely put them in the comments or drop us a line.

Car Production Numbers. They Made How Many? 1939

By | | , , , , , , , , , , , , , , , , , , , , , , , , , ,
3 Comments

Let’s jump up 13 years from 1926 to 1939 and see what the numbers look like.

1939 shows Chevy in the lead for production numbers with 577,278 units produced.  Ford is about 100k behind at 487,031 (half of what they were producing in 1926).  The rest of the makers finished up like this:

Plymouth                                 423,850

Buick                                       208,259

Dodge                                     186,474

Pontiac                                   144,340

Oldsmobile                           137,239

Studebaker                             85,834

Also in 1939 Mercury came on the scene with its 239 CID V8 making about 95 hps and hydraulic brakes.

Lincoln-Zephyr only sold 650 pieces.

Part of the Studebaker’s 85k cars were its light pickup truck, the Coupe-Express was powered by the Commander Six, knocking out 90 hps.

 

 

1939 Studebaker Coupe Express

 

Thanks for reading

Tim

Mustang Upholstery Part IV

By | | , , , , , , ,
Leave a comment

After removing the seat track I had to remove the seat stops.

There are two and easily removed.

Next I started removing the upholstery wire.  These  pliers hook inside the wire and separate them for removal.

Removal

Here are the wires removed.  They can be reused if you want to straighten them out.

Wires

 

Mostly removed.

Part way off however one small deal to handle

 

Thinking I was on the down hill side with the removal of the old upholstery, I ran into……the …..tuck!!!  This consisted of a wire running through a cloth sleeve and the wire is attached to the springs with the hog wire.

Top Arrow is the cloth sleeve with the wire running through it. Bottom arrow is the hog wire crimped to the springs underneath.

Basically the tuck is how they separate the bottom of the seat and the cushions edges, which with vinyl that helps keeps you backside in the seat during those high-speed maneuvers.

Ok, this was the learning seat.  I was too busy learning to do too much photography so I’ll to more with the back to this seat and the next.

BUT…………………………..here is my very first seat bottom..completed.

 

 

 

More coming up soon.

Thanks for reading

Tim.

 

Mustang Upholstery Part III

By | | , , , , ,
Leave a comment

Sorry it’s been more than a couple days…a week plus actually.  But hey, it 115 degrees in my garage.

So I removed the seat and inspected the underside.

Again this was my first upholstery job, ever.  So removal of the old upholstery on this first seat was a learning experience so I didn’t get too many shots.

Here is a shot of the seat out of the car.

Seat Out

You have to remove the plastic covers for the hinges and the rest of the hardware to separate the bottom from the back.

Just a couple of screws to remove the covers, hinges and hardware

Here is the underside of the seat with the track hardware still attached.

Back removed the track still in place.

The track is remove with 4 star bolts.  Be careful use the proper socket, I happened to have just purchased a huge set of tools (a bit more the ‘average guy’ might have) that had the necessary socket set.  If you don’t have those, find one of those universal sockets that ‘form’ to bolt.

4 star bolts hold the track to the frame of the seat bottom

Bolt and socket

Part IV coming up tomorrow.

Thanks for reading

Tim

Mustang Upholstery Part II

By | | , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Leave a comment

The next step is to remove the seat from the car.

For the Mustang the studs pass through the track and the nuts are under the car so a little space is need.  Since most average guy’s don’t have a lift in their home garage, so I pull out the trusty 2 ton floor jack and a jack stand.

As most Mustang owners know, they were built with subframes.  When jacking up the car with a floor jack place it on the frame, or use the standard scissor jack that attached to the seam at the rocker panel.  Either way once it’s in the air, DO NOT FORGET to put the jack stand under the car. Yes it actually takes longer to do the set up then to remove the bolts…but take the time to be save.

2 Ton Floor Jack

Floor pan plug that protect the bolts and studs.

These plugs pry out very easily.  I was able to get them out with just my fingers.  Once they are removed you’ll have access to the nut.  The distance between the opening and the nut requires an extension and the length of the stud requires a deep socket.  These were 1/2″.  The Mustang was raised in Arizona (get it?  First reader to drop a comment explaining “get it” wins a DVD.)  and all the plugs are in place.  This kept all the road grime and what not off the studs and nuts, they separated easily.

When you are done you should have this many parts.

When I purchased the Mustang I was told that the upholstery was replaced at some point. (Keep that in mind for later as well.)

[vodpod id=Video.11743606&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252Fremoval1.mp4]

 

As you can see in the video I wasn’t able to get the seat out of the car. I initially I figured it was because I couldn’t pull out level enough for the studs to clear the holes due to the fact that I was holding the camera. However, after putting it down I still shouldn’t get the seat out. So I climbed back under the car and found that there was a second nut on the right rear stud. I’m guess it was doubled up, when the last installer wasn’t sure whether they already but one on? And of course you can see by the previous picture that those two nuts not the same as the others.

Part III will be coming up in a day or so.
Thanks for reading.
Tim

Mustang Upholstery Part I

By | | , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
5 Comments

I know, I have a lot of work scheduled for the Mustang. This includes interior work and yes maybe doing it all at once would be a good idea. But I drive it a couple of times a week and the seat is getting worse. So I decided it needed to be fixed.

 

The kit is from TMI and I think I purchased it from a Mustang parts dealer, but I don’t recall which one. Here’s a couple of videos on it.

 

 

What I noticed is the black piping. I know that the car was re-upholstered before I purchased it, so I’m guessing that this was not original, at least they don’t make them in the reproduction world.

 

Coming up is the removal of the seat.

Thanks for reading.
Tim