I know it’s been a while. But final my 1973, 351 Cleveland powered Mustang (the last of the big Stangs) is back on the streets.
Here the ride’s home. I’m not sure what’s up with the audio but at times is sounds like I’m recording under water.
Thanks for stopping buy.
Tim
#ProjectSportsRoof
Thanks for checking back on #ProjectSportsRoof.
Valve gasket installed, zinc added and now it’s time for quick power test. I have yet to get the pedal to the floor and now it’s time and I took the captured the fun….and…well…take a look:
A quick troubleshooting proved that the car was still getting fuel but would not start. After setting for a bit still not firing up. I suspect distributor. When I have time I’ll dig into.
The day ended with a flatbed trip home. 🙁
More to come!!!
Thanks for reading.
Tim
It’s been a while!!!!
Ya know, one would think that as you get older there’s more time for leisurely things. But as second year teacher (at the age of “past 50”) and coaching our school’s basketball team there is no slowing down. That’s my only excuse for not working much on Project SportsRoof. Ok there’s one more….we’ve had a colder and wetter than normal winter. This episode is purely due to “Spring Break” and having our taxes done (almost).
If you’ve followed along (did you know you can find Average Guy on YouTube as well?) you’ll know it’s been a long road with my 73 Mustang. Multiple starts and stops, often caused by me exceeding my ‘Average Guy’s’ skill set and man power and even my car disappearing for a couple of weeks (but I found it). Oh and don’t forget the tow truck driver that “broke” my front end!
Now SR73 (not SR71 the blackbird aircraft) or #ProjectSportsRoof is back on the road. Having only driving about 30 miles since the engine rebuild, I noticed a lifter noise. Not something you want to hear after all the time and $$ spent on it’s 351 C, in fact it’s a bit concerning.
The best place to start troubleshooting is to make sure the engine is getting the oil it needs. That requires pulling the valve cover and running the engine. Since I put the heads together myself, it’s a good idea to check the torque on the valves. What better time to check that than when you have to take the valve covers off anyway?
Here is my quick video recap. There are a couple good tips in this one and here is a one more great tip. I can’t take credit for it because was shared with me sometime back. Should you have an old set of valve covers, cut the tops off to make viewing possible. That way when you let the car run (it’s the easiest way check if oil is flowing) the spraying oil is somewhat contained. You won’t see that in these videos….but you will see the mess it makes when you don’t use them!!!
Don’t forget to drop a comment, if you are so inclined. Oh, if you have an event you’d like to tell other car peeps about, let me know and I’ll post it up!!
Tim
1973 Mustang – Project SportsRoof – Compression Test Part I
1973 Mustang – Project SportsRoof – Compression Test Part II
1973 Mustang – Project SportsRoof – Compression, Rods and Heads
1973 Mustang – Project SportsRoof – Engine Bay Components.
Over on Facebook one of the groups has a Then and Now series of posts. That consisted of folk posting the cars they were driving 10 years ago and now. I thought that was cool so I put quick clip together for my rides then and now.
For sometime now I have a Mustang Corvette combo, my ’70 Mustang/84 Vette combo and my ’73 Mustang/’07 Vette combo.
Just a little trip down memory lane!!
Thanks for reading.
Tim
So today the Mustang was going to make a quick trip the shop down the street to have the valve body put back in the transmission. The tow truck driver got the ‘Stang off-center on the flatbed and decided to winch it sideways. Only problem he wrapped the chain around the lower control arm. I was on the phone and heard a sickening snap. The bottom of the lower control arm is now facing the front of the car and you can see the rest here. Video is below the pic.
 |
 |
Will update when I have news.
Thanks for reading.
Tim
#ProjectSportsRoof
Welcome back to my 1973 Mustang project #ProjectSportsRoof.
In the last post I mentioned that some how the shift linkage bar was lost when I had the car in a local shop to help put with the transmission. They took another look around their place and I did the same…no luck. So I purchased a replacement link.
Take a look….warning the audio is not great in spots.
Well we are now moving into, what I hope is an adjustment phase for the transmission. However, it might be something….more expensive!!!
Stay tuned.
Thanks for reading
Tim
Well this day was long time coming. My 1973 Mustang has finally returned home and it sounds fantastic!!
You followed #ProjectSporstRoof, you may recall I ran into time issues and ability, to get the transmission mated back up to the engine and the components had to be placed back under the hood and new radiator installed. I had disassembled the engine, send it out to be bored (.040) and crank was milled a bit and rebuilt. That was over a year and half ago. In Feb of this year I decided to get some help getting it running.
A relative had an acquaintance that was starting a second shop here in Tucson to match the success of their first shop that was about an hour way. I wanted to keep the car local so I could check in on the work being done. So I asked and received an estimate and the price was fair. My only stipulation was that the car stay in Tucson and not their out-of-town shop. What I didn’t know was that their idea of starting a shop was to use a garage at a start-up/pop-up used car lot. In return they would be doing really cheap work for the car dealer in lieu of paying expensive rent.
There’s very few times such a plan works out and one day my Mustang disappeared and I wasn’t informed. I eventually (weeks) got a hold of them and found that my car was right where it I didn’t want it…at the out-of-town shop.
Now, I understand business deals falling part, especially when you start-up with little capital and hook-up with another start-up with little capital. What I didn’t like was not knowing that my car was now no longer in the city. Checking on the progress was going to be impossible and as it turned our some of my parts were left/lost at the Tucson shop. An additional problem was that I forgotten to pack a few parts and it took massive coordination effort to get the items to them.
Number 6 is huge!!!
If you don’t have trust in the shop then everything, even the normal things, that arises when you are restoring a car are suspect. Combine that with a newly rebuild engine, never fired-up, well lets just say I was concerned that the proper cautions would be attended to and I’d end up with a pile of ugly Mustang parts in my driveway that I’d have to get rid of or sell the house to afford to fix it!!! So I held my breath and reluctantly had them push on.
Only two real issues came up, one was the drive shaft, it has been repaired a some point in the car’s history and poorly done at that and the yoke was in rough shape. A local shop said that could fix it for a set price, they couldn’t and ended up replacing the shaft and for the original price quoted. The other issue was a panic call/video from the shop, showing my Mustang vomiting radiator fluid in the air like Hawaii’s Kīlauea. That of course is what happens when you put a Windsor thermostat in a 351 Cleveland.
So I reduced my expectations and told them all I wanted was for the car to be mobile. I wanted it driven off the trailer and driven in my driveway and I’d be finished with them. The manual shifting you saw in the video is a result of a lost part.
Now #ProjectSportsRoof is back and I can get on with all the little projects that are left…like installing the shift linkage…yea…that should be first!!!
Thanks for reading and I can now say…there’s more coming up for #ProjectSportsRoof!!!
Tim
Well it has been a while since I’ve updated readers on #ProjectSportsRoof and frankly there hasn’t been a lot going on.
As the regular readers know I do all the work I can on my car, when practical. This work happens in my driveway, which unfortunately has a rather steep slope.
You’ve seen the videos of my work pulling out the engine and the transmission and putting the engine back in and attempting to put the transmission back in.
I few weeks ago, after suffering from a huge bout of guilt for not working the Mustang, I attempted one more time to get the transmission reattached to the engine.
This endeavor, required me to put the car up a lot higher than normal on the stands, to get enough room to maneuver the trans and the transmission jack around. this was a huge mistake. After a few tries I decided to pull the transmission back out for under the car and wait for some help later in the week.
Everything went fine and the transmission was safely strapped to the transmission jack and rolled back into the garage. Since the car was lifted higher for the failed attempt, I decided to lower it back on to the ground. As I lifted the car with my floor jack, so I could remove one stand one of the remaining stands slipped from its place and the car dropped about 5″ on to the tires. This didn’t seem to be to dramatic of a fall until I noticed that the motor mounts had separate (broke to be frank).
That was depressing, to say the least and another set back. Of course this depression was compounded by the fact that I had very limited free time coming up to work on the car. I am a full-time Junior High teacher and I had just signed on to coach our boy’s basketball team which was a lot of fun (we when 10 -2 for the season) and very time-consuming.
I purchased the motor mounts and was attempting to schedule a couple of relatives to help out. That proved difficult.
So a relative mentioned a successful automotive shop that was opening a new location here in Tucson and I contacted them to see they wanted to tackle the engine and transmission re-install, build a custom drive shaft and add headers and exhaust. They looked it over and we agreed on the cost estimate.
So off she goes to get the complete drive training straighten out and hopefully back on the road soon.
There is still a lot of work to be done and as I get ready for my summer break from teaching, I should be able to but more time into it!!!
I have a lot more coming up on #ProjectBeepBeep as well.
Thanks for reading.
Tim
#ProjectSportsRoof
#ProjectBeepBeep
Spend a few hours on this 2017 Labor Day, laboring over #ProjectSportsRoof and I wish that labor paid a bit more dividends.
The goal was to mate the transmission back to the engine but unfortunately that just wasn’t going to happen today. The engine is set back a bit too far and tilted (on purpose). Problem is if I bolted them up the engine hoist would be able to lift the engine and trans due to the height I needed the car to work on the transmission.
So I pulled the transmission out from under car and placed its wheels back on the concrete.
As I stated in the video I may just take it down the street and have them get that straightened out for me.
More to come on #ProjectSportsRoof.
Thanks for reading.
Tim
I like stats!!!
0-60 mph, 0-100 mph stats, bore and stroke, torque stats and the world-wide stats for this site.
I like to take time to thank the viewer from around the world from time to time.
With over 40 different countries tuning in to check of progress on #ProjectSportsRoof and #ProjectBeepBeep I think it’s
cool to see such wide-spread interest.
So here’s some stats.
80% of the viewer are from the US.
3% are from Canada
2% from the UK
1% from Mexico, France, and Australia, Russia, German
Other countries, Saudis Arabia, Spain, Italy, Poland Netherlands, S. Korea
South Africa, India, Philippines, Thailand, Indonesia, New Zealand, Japan.
And here’s a big thanks:
THANKS!!!
1968 Ply Road Runner
Project BeepBeep
