With the upcoming release of the Shelby GT500 Super Snake many people will have an opportunity to put on of these limited edition Shelby’s inside their garage. It’s quite the opposite for the 1967 Shelby GT500 Super Snake as the person who wins this ebay auction for the only 1967 Shelby GT500 Super Snake ever produced will have the ultimate limited edition Mustang. The 1967 Shelby Super Snake sports a 427ci V8 with 520 horsepower, a 170 mph top speed and unique triple stripes. The ebay auction is set to end in a week. Check out the pictures after the fold.
Coming up will be a series of posts as I rebuild the original 3 speed transmission. This is the original 3 speed transmission from my 1970 Mustang. I’ve replaced it with a rebuilt 1965 4 speed transmission from a Shelby Mustang. (See that in a post coming up.)
I’ll start the tear down after the Christmas holiday.
Everybody knows that saying “I’ve died and gone to heaven”, and this applies to most enthusiasts in this junkyard full of old decrepit Ford Mustangs. Especially, the project guy that has an old classic sitting in the garage. I’m sure it could go either way, though, as some might consider this a sore sight with so many wrecked and rusted ponies. This is the Colorado Mustang Salvage Yard.
Soooo, anybody down for some campin’?!
Colorado Mustang Specialists, Inc. began in a two-car garage in 1972. Mustangs were as numerous as hippies on a Boulder park lawn, easy to buy, fix and sell. So, a would be University of Colorado student found a lucrative way to pay his rent and tuition. After graduation the diploma went in a drawer and the horsing around got serious. Wrecked, junked and abandoned Mustangs were cheap and plentiful, so the collection started that eventually led to the worlds largest Mustang salvage yard.
Most recent and exciting to us is the addition of modern fuel injection conversions, for 64-1/2 to 85 models. These conversions and related parts let the novice enthusiast bring his early Mustang into the new millennium with a computer driven, fuel-injected, V-8 power train, meeting todays standards without changing the Mustangs classic design. We predict these conversions will open a fun and exciting new era of Mustang enthusiasm.
As I’m sure you’ve heard or witnessed first-hand, Hurricane Irene threw her wrath against the eastern seaboard with initial landfall in North Carolina as a Category 1. Although predicted to be a Category 3 at landfall, this storm was still nothing less than a monster. This major hurricane realeased havoc from Myrtle Beach up to Maine as it churned along leaving major paths of destruction behind and massive amounts of rainfall. Power outages became widespread up the east coast, (includes my family in Pennsylvania at this current moment). Streams and creeks became raging rivers taking out roads, bridges, one being a 156-year-old hand-hewn bridge in upstate New York. It destroyed houses and stranded people in or away from their homes. Evacuated people are now stranded wondering the fate of their homes and personal belongings. Washed-out roads and bridges have left complete towns stranded without a way to get to or out like these towns in Vermont that have over 260 roads closed.
This storm has caused massive destruction and that has effected some of our own Mustang enthusiasts. Member, RobTRoma from PA, joked about getting a photo of his car next to a hurricane in our Mustang game thread. Featured above, what looks like a very nice ROUSH S-197 Mustang is sinking in a Subway parking lot in North Carolina during Irene’s throw-down. It almost has an ambience of Jaws coming out of the water before Roy Sheider exploded it.
Some people are visual creatures and some are more in tune with the mechanics of life. I am a visual creature. The shape and colors of things are what I see first. So the whole idea of designing and drawing cars just fascinates me. Since this is a Mustang enthusiast website, thinking of what the next Mustang will look like is a mini obsession of mine.
Back in September of 2009, I started following a blog on the design of the new Mustang for 2014. And what appeared on that blog just blew me away.
Now I realize that Area 51 exists for more than just concealing a crashed alien space ship. It is also a test area for military vapor ware that we may see 20 years or so after it is new, you know, after it becomes obsolete and is no longer top secret. Well, getting a glimpse into the design studios of a major car company is like getting a tour of Area 51. You may see things that amaze and confuse and things you may have thought only existed in someone’s twisted imagination.
So how would it feel to get a whole truck load of sketches of the 2010 Mustang, drawn by one of the designers, just months after the new design was introduced? Yeah, it was pretty special. Rob Jensen was one of the designers of the 2010 Mustang, specifically, the GT500. Now, maybe you have seen these sketches before. Maybe they amazed and confused you back then, as they were way too “artsey” for a production car. But some parts and pieces of them made it onto the 2010 cars and some of them were left on the drawing board, literally.
For the Mustang Enthusiast in the crowd that leans towards the visual, stunning design side of cars, please enjoy the collection of sketches in our gallery below. Some are from Rob Jensen, some are from others on the Ford Mustang design team. Still others are designs by professional artists and amateurs that put together some very impressive Future ‘Stangs.
One thing to keep in mind, if you are seeing it here, out in the open, then most likely it looks absolutely nothing like the next Mustang will look. Think of this as the Area 51 Museum of Mustang design. If you like something you see, give the artist some love as I will try to provide links to as many of the artists as I can. If there is another artist out there that we need to know about, definitely put them in the comments or drop us a line.
Sorry it’s been more than a couple days…a week plus actually. But hey, it 115 degrees in my garage.
So I removed the seat and inspected the underside.
Again this was my first upholstery job, ever. So removal of the old upholstery on this first seat was a learning experience so I didn’t get too many shots.
Here is a shot of the seat out of the car.
Seat Out
You have to remove the plastic covers for the hinges and the rest of the hardware to separate the bottom from the back.
Just a couple of screws to remove the covers, hinges and hardware
Here is the underside of the seat with the track hardware still attached.
Back removed the track still in place.
The track is remove with 4 star bolts. Be careful use the proper socket, I happened to have just purchased a huge set of tools (a bit more the ‘average guy’ might have) that had the necessary socket set. If you don’t have those, find one of those universal sockets that ‘form’ to bolt.
4 star bolts hold the track to the frame of the seat bottom
I know, I have a lot of work scheduled for the Mustang. This includes interior work and yes maybe doing it all at once would be a good idea. But I drive it a couple of times a week and the seat is getting worse. So I decided it needed to be fixed.
The kit is from TMI and I think I purchased it from a Mustang parts dealer, but I don’t recall which one. Here’s a couple of videos on it.
What I noticed is the black piping. I know that the car was re-upholstered before I purchased it, so I’m guessing that this was not original, at least they don’t make them in the reproduction world.
Nicola Romeo is credited with setting the foundation for Italian car maker Alfa Romeo. What a lot of folks don’t know is that Alfa was a car manufacturer before Nicola came around.
Afla stood for Anonima Lombardo Fabbrica Automobili and began production in Milan in 1910. They actually produced French cars (the Darracq) under a license, all hand built.
Darracq 1906
Nicola had an engineering degree from Turin. He first worked with mining equipment and eventual purchased Alfa’s plant in Portello.
His management skills and love of racing helped build this car .company in to a lasting enterprise.
Although, apparently their latest offering to the U.S. market of the Giulia, was not well received, design wise and the parent companies Fiat–Chrysler killed it until 2013.
So you are out at the mall or grabbing some groceries at the store and you are headed back to your car in the parking lot and you catch something out of the corner of your eye. It’s out of the ordinary, it really shouldn’t be there, especially parked between that 1998 Honda with almost no paint and the huge Cummings Diesel pick up with a bench car seat bungy corded to the tie downs in the bed, but there it is, glowing and out-of-place.
That is what these segments will be about. Sometime there will be comments from the owner and sometimes I won’t have a chance to chat with them. There is a fine line between loving cars and stalking. (Standing around while your milk getting warm and your ice cream is leaking out of the hole in the plastic bag, waiting for the owner is on the line. Hey..it only happened once!!!…Come on now!!!..You’ve done it!!!)
Wandering around Southern Arizona wine country, we pulled into the one of the winery’s parking lots and I spied this beauty.
1964 Lincoln Continental Love the shape of the grill.
Yes! Convertible with suicide doors.
I’m on the fence with these wheels, but it’s still great looking.
Some 1964 Lincoln Continental facts:
Sales for that year was 32,969 roughly and approximately only 3,328 convertibles were sold. The other option was a 4 door sedan (no two door coupe? I’ll have to check on that). The vert was sold for $6,938 and the sedan was about $700 less.
Only one engine was available for the Lincoln and that was the 430 with 320 hp. Which was good because the car weighted 5,000 lbs. It was paired up with a 3 speed auto transmission which helped it reach the top speed of 110 m/h.
Longer wheel base was about 2 inches longer then the previous years at 126 inches.
