Ok car and Mustang fans you are going to like this:
BOOM!
Agent 47 Harbinger Mustang for racing or street!!!
Isn’t that wicked looking?
They tried for the look of the 69 TransAm Mustang.
Shelby 1969 TransAm Mustang
The Harbinger is built for track or high performance street duty. Here are some specs and more pics. (Check out the racing video too.)
– Limited production of 250 serialized chassis
– Harbingers can be built using a brand new Dynacorn repro body or an existing 69 or 70 Mustang shell. {but it would have to be the fastback or sports back – not my ’70 Coupe 🙁 }
Race spec, low visual obstruction design, 12 point, chassis stiffening roll-cage of DOM steel.
Race proven SLA (double A-arm) Front suspension.
Ultra stable, Bill Osborne designed, V-link rear suspension.
Speedway Engineering 9” full floating rear axle.
Penske adjustable racing shocks with optional weight jacks at all four corners.
Ducted, low drag and lift hood, engineered and crafted by Agent 47.
Come ON!!! Tell me that’s not awesome!!!
Agent 47 designed vintage Recaro style racing seats.
Agent 47 designed, lightweight, Forgeline racing wheels.
Those are nice!!!
Brakes and master cylinders by AP racing.
Check out this set up.
16 lightweight components manufactured using the latest Rapid prototyping technology.
NVH controlled interior with strategic, lightweight, sound dampening materials.
A work of art. Very limited body roll with this set up. Much improved over the original ’69 TransAm
I’m not advertising for these guys, I just really like what they’ve done. There are parts for Fox bodied and other Mustangs as well.
Here a long racing video (cameras are set up for you can see how the body reacts to cornering).
Remember a few post ago that covered MOPAR’s in Sweden? (Short Link: http://wp.me/pKHNM-174) I wrote how interesting it was to see US sheet metal in other countries.
Well check out this car show in Rothrist, Switzerland. This is from Andres Palomares who lives in Bern, Switzerland. There are some great examples of US car history in this show.
Switzerland is beautiful and visited Interlaken several times while living in Europe.
Ok..this guy is clearly lost…Who brings a Mustang (even an extremely nice one) to an All Chevy Show:
Listen to this Chevy:
Two more to listen too:
And although there were a lot more entries for this show I’m going to end this series with one that brought back a lot of memories. This wasn’t a 1966 like my very first car, but it was pretty closed. Look over this Impala.
No this isn’t going to be one of those talks and no we aren’t going to run out and hung a tree, ok…if you must…go ahead I’ll wait…..(insert bored whistling)……(more bored whistling)…..Ok…are you done?!!
As I get closer to getting the heads on the Mustang, I’m going to have to begin picking any changes I want made to the CJ heads. While cruising the web checking out options, I ran across this piece (Corvette related but springs are springs as far as an engine is concerned) and there are some good tips here.
Quick! What the fastest moving component in your engine? If you’ve taken a hint from the title of this article, you probably guessed correctly – it’s your valve springs, those tight little bundles of joy that open and close your engine’s valves.
Beehive springs come in a variety of shapes and sizes. The benefits of moving to Beehive springs where possible (and today few situations are not Beehive compatible) are many.
Beehive springs, such as those offered by COMP Cams, offer a huge number of benefits over stock-style cylindrical springs; reduced valve spring mass, faster valve acceleration, increased valve train rigidity, reduced valve train component stress and a whole laundry list of other positives.
Best of all, the word has gotten out and folks all over the country are using them for a wide variety of applications from street performance to extreme racing endeavors. That’s a really good thing.
Along with their success has come some confusion over exactly which beehive is right to purchase. Currently there are over a dozen beehive spring styles out there, each offering some unique take, be it in the seat pocket diameter, ovate wiring diameter, pitch or internal spring “frequency.” Regardless increased selection has bred some minor confusion, albeit easily cured.
Beehive springs are conical shaped springs that employ this powerful shape in the creation of a spring that can deliver both excellent performance and lowered seat pressures. With lower seat pressure, valve train components (especially the pushrods, rockers and lifters) are less stressed to perform the same work.
This beehive spring weights in at 99 grams, while a comparable conventional spring is 121 grams.
The difference between beehive and conventional cylindrical springs is obvious especially when you compare them in this manner. Note the dramatic difference in retainer diameter equating to less valve train weight.
According to COMP, effective beehive springs can support an additional 700rpm over stock cylindrical springs. How? It just stands to reason that the smaller coils at the top of the spring don’t require as much force to get the valve moving quickly, much quicker than conventional style springs. The higher rpm potential equates to better durability and performance.
There are some very knowledgeable engine builders who don’t understand how a single coil spring can be better than a dual conventional spring.
“Its like watching a race car running 60-foot elapsed times on the drag strip,” stated Bill Godbold, Chief Engineer for COMP Cams. “For example, take two identical cars with equivalent 500 hp engines.
“One has stock suspension and the other a sophisticated racing suspension. The car with the race suspension will get going more quickly and achieves better 60-foot time. The same principle works with beehive spring mechanics.”
The 2015 Mustang reveal is getting closer and there’s been a lot of hype from the Mustang community about the new model! J. Mays, Ford’s Creative Chief Officer, previously said the new gen model will be less retro and way more modern as to move the Mustang name forward. That has people creating their own renderings of what they think it will look like.
What we do know about the 2015 Mustang so far? Well, it will be smaller, lighter, feature independent rear suspension, and will be offered globally. An Ecoboost has been everything but confirmed.
Check out the Mustang concept that Popular Hot Rodding magazine drew up! These renderings are what they believe the new Mustang model will look like. In my opinion, the red drawing looks more like a squished Bugatti than a Ford Mustang, and definitely very futuristic. Also, the silver concept has more of a Mustang feel with the front and rear end and I can dig it. Definitely cool drawings and concepts, but is this where the new Mustang could be headed?
Replaces that is, boot as in shifting boot. (Were you thinking…since I just got back from the Barrett Jackson Auction.. I was considering getting rid of the Stang ? Nope..but I tell you there were a couple of cars I’d even swap for…that’s for sure!!)
When the 4 speed trans got installed we used the old rubber boot and it did tear. So I replaced it with a nice leather replacement from Scott Drake.
The chrome plate (well not really chrome) was originally held in place by the last fold of rubber on the boot. This isn’t possible with the leather replacement so I had to improvise.
So the boot and trim are in stalled, but of course you leave those ugly bolts sticking out. I originally thought that I would get some chrome bolts to replace, but they aren’t inexpensive as I found out when I replace my 1984 Corvette’s valve cover bolts with chrome…hey..they keep the chrome locked up at the local Ace Hardware!!! <<>> So since I still have to replace the carpeting (I could change my mind later about the bolts) I opted for some plastic chrome-like covers – they are actually cover for license plate screws. Here are a couple of pics:
One cap on and one off.
Both caps on, held in place with a touch of easily removed household rubber silicon glue
The big Scottsdaleauction week is finally here, now with six companies set to to drop the hammer on literally thousands of collector cars in a mere handful of days. In typical fashion, Barrett-Jackson was the first to usher cars through the stage lights, and it’s here where we’ve been alerted to the probable sale of this 1948 Tucker (chassis #1043) currently owned by none other than noted Barrett-Jackson attendee and enthusiastic car collector Ron Pratte.
Specific details about the Tucker are lacking, other than mention of its restoration, on Barrett-Jackson’s auction description. And we use the phrase “probable sale” simply because unlike most of the lots at B-J, the Tucker is listed as having an undisclosed reserve. That said, Mike Schutta of the Tucker Historical Foundation, provided more insight.
This car is very nice and most Tucker fans are keeping a close eye on this auction to see if it will set a new record price for a Tucker. The current record is $1,127,500 paid for Tucker #1045 about 18 months ago. This Tucker is in much better condition.
An interesting tidbit is that Tucker #1043 was used as part of an advertising scheme for a golf driving range in a western suburb of Chicago back in the ’50s. It was painted Tropical Rose and Snowshoe White to match the driving range buildings.
While surfing through the Barrett-Jackson website for more information on the Tucker, we stumbled upon four other Ron Pratte-owned vehicles that will also be offered at Westworld during the weekend, beginning with the car pictured above: the 1947 Bentley Mark VI with coachwork by Franay. The Bentley was last offered for sale by Barrett-Jackson – at no reserve – at their 2006 Palm Beach auction, where the hammer fell at $1,728,000 (including buyer’s premium). At that sale, details of the Bentley were as follows:
4.5 Liter Inline 6 with a four-speed. Coachbuilt by Franay. Magnificent restoration to Pebble Beach Concours d’Elegance winning standards. This is the first major winning Concours d’Elegance car after WWII. Winning the first two major Concours in 1948, back-to-back, on the 12th of June at Enghien and the 17th of June at Bois de Boulogne. Mr. Gudol, the original owner and visionary of the Franay, was an industrialist whose sole purpose was to prove to the world that France was not only back from the rigors of war, but ready to reassert its dominance of haute couture and automotive design elegance. The awards the Franay has won over the decades is proof of his timeless vision. Mr. Gudol, in his wisdom, continued to enhance and advance the performance capacity and design elements of the Franay to push the envelope of an ever improving competitive edge in Concours d’Elegance competition. Mr. Gary Wales, who has shepherded the Franay through over 50 major awards and honors since 1990, has scaled back the number of public appearances so that the car is currently eligible for any and all Concours d’Elegance events.
Like the Tucker, the Franay Bentley touts an undisclosed reserve.
Then there’s Pratte’s 1957 De Soto Adventurer convertible, again with an undisclosed reserve. Oft-repeated generic De Soto history aside, specific details provided by Barrett-Jackson state:
Powered by the famous 345/345hp Hemi V-8 with dual quads, an automatic transmission, push-button shifter on dash, and independent torsion bar front suspension. With the division’s top Hemi V-8 under the hood, the Adventurer was an early muscle car with a set of the most aesthetically pleasing tail fins ever seen on virtually any car.
The only two cars listed by Pratte without a reserve are this pair of 2007 Shelby GT500s, which are to be sold as a pair. Details per the auction site are identical for both Shelbys:
In January 2006 Ron Pratte bought the Ford Motor Company’s newest car, a 2007 Ford Shelby GT500 VIN 00001 that benefited Carroll Shelby’s Children’s Foundation. In the past, Ford reserved the first fifty cars produced for Ford family members and senior executives or by other people on a selective list. Ford was so grateful to Ron for his generosity, they offered him the opportunity to buy two more, VIN 00002 and VIN 00005. While Ron is keeping VIN 00001, he is selling the orange Coupe and matching convertible as a pair. The successful bidder will get both cars for one price. These cars are special in other ways as well, as part of the purchase of VIN 00001 was a trip to the Flat Rock assembly plant where these legendary cars are manufactured. At the end of the tour of the assembly plant, Ron was presented with the keys to VIN 00001, VIN 00002 and VIN 00005 by Carroll Shelby and Carroll autographed all three cars for Ron. Along with his cars were three other 2007 Shelby GT 5000′s, for Carroll Shelby, Steve Davis and Gary Bennett. Ron then threw Ford a curve and said he didn’t want any of these cars shipped by rail to the owners, he wanted them trucked, enclosed, to his facility in Chandler, Arizona, bypassing the traditional dealer delivery and inspections. All of the cars, including Carroll’s personal GT 500, were delivered to the respective owner this way. This is a unique opportunity to own two pieces of Shelby and Ford history.
Barrett-Jackson’s Scottsdale auction started Sunday and will run through this weekend. For more information, visit Barrett-Jackson.com.