I’m always reading where a guy had replace every part on his car and saved all the old parts. As with all things there is line of demarcation. What made me think of this was the new front end of the Mustang and a previous conversation when I was needed to rebuild the transmission for the 2nd time in the Corvette.
I was pretty fed up with the T400R (I’ll share the story when I talk about the mods for the Vette in another post). I had trouble with it when I first got it —only 32K miles, and then a horrible rebuild and on the second rebuild I was considering just replacing with another level 2. A fee of the guys from the Corvette club (ACE) that I belong to encouraged me to keep the old trans because it would be important at some point to have the matching number trans.
I’ve read were some have even kept old sheet metal because of the part number and the new after market ones don’t have that. But there can’t be much value in having an old front valance for my Mustang laying around..ya think? (Ok..fine I do still have it and it does have the original part number on it..but I wouldn’t put it on again.)
So saw no reason to keep the old control arms no value in that.
BTW I had the Corvette transmission rebuilt. This really leads me to another topic I read about in a car magazine. The topic was survivor cars or the most original. That one later.
We all love closure and especially when it ends well.
Mustang is back from the shop. Buying the control arms ahead time saved a few dollars. HINT: If you know you need a part, but not right away, but you have the funds (too many buts???) look for a sale. I’m continually sent emails with discounts from Mustang parts places. I purchased these on an email and got free shipping. What I didn’t have was the spring perches. Luckily I found them at a local place that specializes in muscle cars and in particular Mustangs. They ran about $80 for the pair.
While they had a part I splurged for a set of shocks…no labor because they had it apart already. (Hint: More savings!!)
So I drove over to pick it up and drive it around the corner to the tire place and got two new tires tossed on. I can’t believe the difference the new front end makes. Took it out for a drive. This car is nearly done.
Side note: I’m enjoying this Blogging thing. Although we are light on the comments..Mr. Sears is always helping out there, it’s good fun.
Got to give a shout out to a loyal reader…HEY PDAWG!!! Get me that pic of your garage!!!!
There has never been a clear understanding between these two ways keeping a car alive. Perhaps is not so much an understanding issue as to a delineation of the fine line between the two.
I do agree that there is a difference. Clearly if one were to take a 1970 Camaro and put 1989 front end on it, or a Ford 8 bolt rear end and 351 Cleveland that’s a restro-mod. A couple of car shows ago I saw a 1967 Ford Mustang with a Corvette engine (LS1) shoved under the hood. Oh..hey..I have pics…here’s one and there on at the bottom of this post.
I spoke to the owner and asked him “why” to which he responded “Because I could.”
Sometimes it’s pretty easy to know when to call it a restoration or a restromod. But what about finer changes, cosmetic, or safety changes.
I mentioned, in a previous posting, that a judge called my Mustang a restromod. Which I was take back a bit by. I started thinking about after I posted that and I’m going to have to agree with him and here is why.
I believe the swapping of the 250 for a 302 wasn’t the problem (unless your definition includes a requirement for a matching year block …I’m sure mine isn’t from 1970 at least not the short block) or the dual exhaust. The Center Line wheels…. maybe. Now the rear spoiler and the Mach I mirrors might be where I crossed the line. You couldn’t have purchased a coupe with those items, as far as I can tell with the research I’ve done. But aren’t we now just talking about accessories, like dice hanging from the mirror or a locking gas cap?
Now what if there was just a brake change (drum to disk) for upgrade for safety, or seat belts added or something as simple as steel belted tires.
Where would you draw the line? Drop me a comment and let me know.
So I left off with perhaps one of the worse fears, breaking it yourself.
Having it broken by someone else is only slightly better, YOU didn’t do it, so you can be mad at someone and chances are the signification other will lighten up, especially when they find you sobbing uncontrollably, laying on the hood your classic.
I have had that experience with my Mustang. Since kids might run across this blog I won’t use the language I might normally, when relaying this next incident.
I had just gotten the engine conversion done and I was happy. Some work on my part and fair amount of money got me to where the car had the power it needed. I’ll talk more about the modification and conversion later on. I think I had the car back for a couple months and one day…a rainy day….errk………..I live in southern Arizona ….what manner of horrible luck can you have to deserve such crappy timing? I was only a mile from home and I stopped at a red light. 10 cars in front me and as I waiting with them, I glanced in my rear view mirror. There I see a small white pick-up in the distance coming my way. As I watched, I realized that he was coming pretty fast. A nano second later I was 100% sure he wasn’t going to stop. I shoved the clutch in, dropped her in to first, cranked the steering wheel to the right, hit the gas and popped the clutch. Well, the additional power I longed for, now realized…spun the rear wheels, in what normally would have been an enjoyable manner, but right that minute I was wishing for the straight 6 again…(well..maybe not exactly). I was just able to nose the Mustang’s front end way from the car in front of me when I looked up and saw…(this was all happening in extremely slow motion – right now just playing it in my head..it seems like ten minutes at least) this white pickup starting to stop and then I felt the slam from behind. The force pushed the Mustang past the car in front of me by 3/4 of a car length. If I had not gotten the few precious inches just before the tires began spinning, I would have destroyed my 3 month old bored out 302 and all the hard work that went into the engine bay, electrical, and new AC would have been for naught.
Ok I’m going to stop here for the now. More tomorrow.
One more day until Corvette Auto X day. Taking my son with me, he’ll be grabbing some vids and pics that I’ll share.
Thanks for reading and thanks for being able to read!!!!
For this evenings writing I thought I’d give you a run down on my Mustang.
WARNING: Caution Chevy owners you are going to hear Ford stuff!!!! This blogger does have a split personality.. Ford vs. GM. I catch a lot of <insert bad word> from my Corvette club and the same from the Mustang guys. I’m learning to live with a split persona..”No you’re not!!!”…”Yes I am!!!!” “HEY guys…not NOW…they’ll notice.” “Fine!!!!!”….”He started it!!!!” ENOUGH!!!
Sorry folks, must have missed my medication this afternoon. Sooooooooooo..oh…yeah…I remember.
I purchased the Mustang about 4 years ago from a family in Glendale, Az., for $6000.00 cash. They were the original owners and purchased it in Phoenix, Az and handed it down their daughter. She is the one I purchase it from. So, I am the 3rd owner. The car was in pretty good shape but had over 173K miles. Engine was a 250 straight 6. No power. It had dealer installed AC and when you turned that on..forget ’bout it (insert heavy NY accent) you could walk faster. Ok, not really the 250 was rated at about 155 hp but it had 10:1 (or 9:1) compression and for some odd reason they stuck a single barrel carb on it. “What?” you say….I say yup..it was a Webber. It also sported (and still does) a 3 speed manual transmission mounted on the floor. The interior was recently re-done and in good shape, except for the dash. All the gauges worked. The original radio was replaced with a crappy first generation cd changer (located in the trunk…pretty convenient).
Here is a program note. When see the word “TIP” you’ll know that this is something you might want to jot down.
I’m going to give you the details for how the Mustang came “configured” when it was ordered. Later on I’ll give you the list of modifications and if anyone likes (comments…good or bad…are welcome and questions as well) I’ll pass on my web site link and you can see some before and after pictures.
Get ready here comes the first programming note.
TIP: I love the history of a thing. Sometimes, to me, the history is more important than the actual value of the object. As far as cars go documentation will increase the value, sometimes considerably. So where’s the tip? Ok….just for being patient I’ll give everyone a double dose. Keep the paperwork!!!! If you are buying a car ask for any and all paper. Some people keep everything, you’d be surprised. My Mustang came with a folder full. Anything major done with this car was in the paper work. There the second dose. Find a registry for the car make and model. A registry is here someone or some organization contacts owners or is contacted by owners and the list all the details of their particular cars. The individual or organization often create databases and store all the collected information. They are a fountain of information for you to use when getting the details, similar to what you’ll see below in a second, for your ride.
TIP: (No extra charge for 2 tips in a row!!) Ford lovers check this out. There is place in El Mirage, AZ called Marti Auto Works. They own the rights to the Ford databases and records prior to 1974 (some models up to 1989). These guys have everything..I mean everything. Give them the VIN number and they’ll pile on the data (it’s not free but very reasonable). They are authorized by Ford to reproduce window stickers and Protecto Plates (identification plates that go on the inside door jamb). I had them run the number for my ’70 coupe.
Here are some of the details:
The car sold for $2984.20 (ha…2o cents!!!) . The engine was less than the radio. TIP: Insurance companies may only insure your car for the sticker price, that is what my regular insurance company would do. Get some collector car insurance!!! We’ll cover that together in the near future.
She came with the 6 cylinder 250 IV 250, vinyl Hi-back bucket seats (Mach I seats), color-keyed carpeting, floor-mounted shift lever, Instrument gages, factory Ford color “white” color code “M”, black sidewall “belted tires” and AM radio.
(HELP: If any one knows why most people refer to their cars as “she” or “her” drop me a comment. I’d like to here some suggestions.)
It was ordered and sold from Don Sanderson Ford Inc, 5300 Grand Ave., Box 938, Glendale, AZ. It was shipped from Dearborn, MI via rail. Come on now..how cool is it to know how it was shipped?)
Kevin Marti will provide you with an “Elite Report” this includes very detailed data. I’m not kidding..right down to how many were produced exactly like yours. I won’t type it all here, I can send you the level of detail if you drop me a comment and ask for it. Here’s an example: 191,522 Mustangs were produced in 1970; 15, 300 had the straight 6 engine; 107 had the same seats. My car was one of 1,146 with the same paint and trim codes. It was the 58,634th Ford vehicle scheduled for production at the Dearborn plant. And here is my favorite. “Your car was actually produced on January 28, 1970 – one day behind schedule.” Cool? Way Cool!!!! Hey, she has a birthday coming up..40 years old!!!!
I think that’s enough for now. Tomorrow – a run down on the Corvette…..”OH YEAH….love GM!!!” …”So the Ford got to go first!”..”That doesn’t mean anything!!!”…”Does too!!!”….”Not!!!” I’ll take my meds tomorrow!!! Promise!!!!
I’ve had this book on the shelf for a couple of years now. It is a great reference to own. The book is by John M. Clor and it features Mustang Memorabilia, a lot of cool stuff. First thing inside the front cover is a CD entitled “Sounds of Mustang”. Yup you …
Replaces that is, boot as in shifting boot. (Were you thinking…since I just got back from the Barrett Jackson Auction.. I was considering getting rid of the Stang ? Nope..but I tell you there were a couple of cars I’d even swap for…that’s for sure!!) When the 4 speed trans got …
If you searched and found or followed my posts on restoring the dash-board of my ’70 Mustang, then you might recall my planning/scheduling issues. As I was taking the old dash pad off, I realized that I hadn’t order the plastic pillar molding. When I finally called a few Mustang parts …
The last I blogged about my Mustang I had finished up the installation of the new dash pad and replaced all the bulbs and cleaned up a few years of dust. If you recall (well you don’t have to, just go back and read the posts) I talked about planning and …
I’ve the pillar post moldings painted and ready to installed. I put on 3 coats of paint. Now I have to remove the dash pad (again) and install. That will be later this week, my Corvette is still in shop and the Mustang is my back up car. Thanks for reading more to …
Caulk another tasks down on the restoration of the Mustang. I finished up the pillar post molding last night. Here is the before: Now these were not as labor intensive as the dash-pad but here were some issues. We’ll walk through them. The removing the dash-pad was chronicled in my earlier post and that was …
