Tag Archives: Muscle Cars

When New Technology Meets Old Cars

By | | , , , , ,
6 Comments

When you work with and/or drive classic cars there is a never ending battle between old school and technology. Do I leave the points and condenser in or do I go all electronic? Do I update the suspension with coil-overs or go with stock suspension? Upgrade the interior to cloth or go with the vinyl? Many of us face those battles all the time. But there’s one clash between old and new that we just can’t to anything about and that is when new non-car technology clashes with old cars.

Back in ancient times the man went out to gather or kill something to bring home for dinner. That hasn’t changed much, especially in my household. Every week I strike out into the jungle to visit the local gatherers’ spot and cart home something for dinner. The only killing going on is my checking account balance.

Today was the day for our weekly shopping, so I fired up the ’70 Stang and headed out, ready for the hunt. After I was done scouting for “sales” and had enough provisions to last seven moons, the clerk (oh, they don’t call them that anymore…’associate’ is the correct term) took my hard earned provisions(HEY!!!..its tough shopping at the mega grocery – carts speeding around like herds of prehistoric lizards, tar pits of jelly on the floor, ill tempered rival tribes in the gourmet isle…yeah…it’s tough!!), stuffed them in to about 20 plastic bags and dumped it all into a cart. On the way out of the store a couple of clerks….excuse me…associates…said have a ‘nice day’ and ‘thank you’, as I tried to push the squared wheeled cart to the parking lot and my car.

 

As I popped open the trunk on the Mustang, I remembered the floor of this cavernous opening is covered with the new vinyl (original material) I installed a few months back and nothing else (I don’t carry a spare for drag strip purposes and it wouldn’t work with the tire size anyway). I looked at the contents of the squared wheeled cart and realized that by the time I got home, my gatherings will be all over the place, even if I didn’t drive like I normally do. If I tied them shut, the bags are still going slide everywhere, including into the quarter panel wells, creating a dripping plastic bag full of wine that just moments ago were grapes.

My next option was putting the bags inside, on the vinyl bench seat in the rear and the on front bucket set. Still the vinyl was going to let everything slide side to side and drop down on the floor.

 

Then I remembered back to when I shopped with my mother as a kid and the vinyl seats in our old Chevy Biscayne. The saving grace there were the old school paper bags that stood up straight and were packed heavy to stay in place. Their square shape allowed for the use of effective load master techniques that kept them on the seat or upright in the trunk. Then I thought,”I should have gone with the cloth over the vinyl.”

Thanks for reading.

Tim

Thanks for reading.

Tim

Muscle car

Muscle car is a term used to refer to a variety of high-performance automobile s The Merriam-Webster dictionary defines muscle cars as ” …
American Muscle Car

about muscle cars . Each episode provides a timeline of each vehicle’s history beginning with its first year of production to its most …

Lemons, Lemonade, Life and Project Cars

By | | , , , , , , ,
10 Comments

No this isn’t a about purchasing a junker car.

This is just an update.

I’ve been preoccupied the last few days I haven’t kept up with my articles.  Since this is the Average Guy’s..etc., then you’ll get this next part.

Thing’s happen in life (a.k.a. – Lemons) and you just have to deal with them.  The goal is always make the best of the circumstances (a.k.a. – Lemonade).

Earlier this week I lost my job with the company I worked in for the past six years. This is not  uncommon in these economic times and there are many average car guys and car gals in the same boat.   Many of those people have project cars and these end up being put on the back burner or sadly end up being sold. As car people we all know this happens and hopefully the car goes to good home.  Hold on before anyone drags out their savings and offers to purchase my Mustang – I’m not there yet.  But it will put my major plans for it on hold for a bit, which is a darn shame, because now I seem to have extra time on my hands to accomplish all those mod, not true a week ago.

So for the better part of the past week I’ve been setting up my job hunting network and getting it in motion.  Now it time to wait it out and see what pops up.  In the meantime I’ll have more time for writing and doing the little left over projects on the Mustang.  I still have the passenger’s seat to re-upholster and the front air dam to put on (I’ve had that in the box for years).  I can install  the polished aluminum alternator bracket I worked so hard on and have yet to install.

And……. I am project managing the restoration of a 1975 Standard VW beetle – pro bono. Here she is:

1975 VW Standard Bug - New Project.

More to come on that.

So unless you are Jay Leno (I hate that guy!!! – not really,  I’m just jealous – I want him to hire me to keep his cars driven and shiny and search out more cars for him..hey..there’s an idea!!!! “Dear Mr. Leno, I’m a car guy and I currently find myself with some  free time so I’m applying for…..”)   you dealt with circumstances like job loss or lack of funds to finish or keep that project collector car.  But remember you can take it slow on projects – it’s OK to slow down and if you have to give up that beautiful machine, keep the memories and there is always tomorrow and another car in your future  –  you have to believe that and work toward it.

Thanks for reading.

Tim

What’s coming up? Take a look!

By | | , , , , , , ,
2 Comments

I have a couple of interesting pieces coming up.

1.  Mercury Marauder name plate

2.  Closure on the upholstery for my ’70 Mustang.

3.  Reader choice – you choose the next engine to highlight

I have a couple commercial ventures on the near horizon:

1.  Certified Auto Appraiser – I’m about to finish my certification and will be specializing in Classic, Muscle, Antique and speciality cars.

2.  Auto restoration project management.  Focus is on those individuals that love their cars, but don’t have the time nor the experience to know what needs to be done.  I’m actually waiting for my first car.  It is a 1975 VW Bug coming all the way from Iowa City, Iowa, should be here this will for inspection and the beginning of its restoration.

So what engine would you want to see highlighted?  Drop me a note here or on Facebook.

Thanks for reading

 

Transformers The Movie – Do We Love Our Cars?

By | | , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Leave a comment

Do we love our cars or what?

I recent attended a showing of the latest Transformers movie (“Dark Side of the Moon“) and if you know anything about this series or of the cartoon of years gone by, you’ll know that the main characters are machines that turn in to robots.  Most of these are vehicles, cars, trucks, semis and even military aircraft.

The car group included a lot of chevys this time, a Camaro  which is one of the main stairs, an Impala and a Corvette (actually a representation of a prototype Corvette).  The  Corvette transformed into a rollerblading robot – which I thought unfitting of my favorite car.

There is the human hero and of course a hot model as his object of desire.

When the hot model was threatened or in harm’s way you could hear the audience get involved.  But when an evil robot was about to execute the Camaro character the audience got really vocal.   Kids cried at that images, thinking that the Camaro was about to get wacked,   forget about the girl….just don’t hurt the car!!!

Yes we love your cars.  Oh and the good cars – the Chevy‘s– saved the world again.

But that’s movies and you can just enjoy it with no lasting harmful effects..unless you are me or  maybe it wasn’t me but the subliminal messages.  I left wanting a Camaro, but not just any 2012 Camaro, but a yellow with black striped bumble bee Camaro.

It must be subliminal messages, I had the same desire after watching Will Smith zip through the empty streets of New York City in the 2007 Shelby GT500 Mustang in his move ‘I Am Legend’ yes the red with white stripes.

2007 GT500 Mustang

2012 Camaro

 

You know you want both too!!!

Thanks for reading…and go hug your car!!!

Tim

Product Review – Griot’s Garage – Long Lasting Tire Dressing

By | | , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Leave a comment

From time to time I check out a product that I hear about, in this case, from a repetitive mail from Griot’s garage.  This is a catalog of sorts, with a lot of merchandise and everything you need to spruce up your ride.

Thier “Long Lasting Tire Dressing” is the first item I’ve tried.

If you recall I did a review a while back on a tire gel here is the link: ” Like and Don’t Like – Products (Tire Gel) and Tools (Thread Chasers)”
http://wp.me/pKHNM-aJ

Here is my new try:

[vodpod id=Video.13290806&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0058.mp4]

Tire Dressing, posted with vodpod
Now before we start, the bottle you see in the video has instructions and to be fair, I’ll give you any variations.
The direction say, roughly, clean the tire, apply with application pad and that a light application will give you a shine and subsequent will increase the luster.  Not much there to go on.
Now you need to know that I applied the dressing with an old sock.  Most manufactures always try to sell something extra and kt, which is an “applicator”, the magic potion and a terry cloth/micro fiber towel.  I normally don’t go for that sales pitch.  So that was the only deviation.
A couple more variables:
1.  The dressing was stored in my garage.  The temperature in there today was about 105 degrees. I applied the dressing while the car was in the garage.
2. The temp outside was about 108.
3.  As you will see my Corvette’s tires have small sidewalls and a lot of small raised text and logo.
Ok so here are a couple before pics:

Before, notice the off-color

More of the discolor and you can see there isn't must sidewall.

Lots of raised lettering

Raised logo

Coming  up application and an opinion.

Thanks for reading.
Tim

Mustang Upholstery Part IV

By | | , , , , , , ,
Leave a comment

After removing the seat track I had to remove the seat stops.

There are two and easily removed.

Next I started removing the upholstery wire.  These  pliers hook inside the wire and separate them for removal.

Removal

Here are the wires removed.  They can be reused if you want to straighten them out.

Wires

 

Mostly removed.

Part way off however one small deal to handle

 

Thinking I was on the down hill side with the removal of the old upholstery, I ran into……the …..tuck!!!  This consisted of a wire running through a cloth sleeve and the wire is attached to the springs with the hog wire.

Top Arrow is the cloth sleeve with the wire running through it. Bottom arrow is the hog wire crimped to the springs underneath.

Basically the tuck is how they separate the bottom of the seat and the cushions edges, which with vinyl that helps keeps you backside in the seat during those high-speed maneuvers.

Ok, this was the learning seat.  I was too busy learning to do too much photography so I’ll to more with the back to this seat and the next.

BUT…………………………..here is my very first seat bottom..completed.

 

 

 

More coming up soon.

Thanks for reading

Tim.

 

How Many Did They Make? 1902

By | | , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
1 Comment

There is a lot of emphasis on numbers for production when it comes to collector cars and I get that, who wouldn’t what a low product something or other.

So I got to thinking about production numbers and thought it would be interesting post some up from time to time.

Now in 1902 there weren’t many cars being produced but there were 8 makers.

1.  Locomobile                                                                           2,750

2.  Oldsmobile                                                                        2,500

3.  Rambler                                                                            1,500

4. White                                                                                     385

5.  Knox                                                                                     250

6. Packard                                                                                 179

7.  Stanley                                                                                  170

8.  Union                                                                                      60

1902 White Auto

Knox Truck Circa 1902

 
 
Thanks for reading
Tim
 
 
 

 

Mustang Upholstery Part II

By | | , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Leave a comment

The next step is to remove the seat from the car.

For the Mustang the studs pass through the track and the nuts are under the car so a little space is need.  Since most average guy’s don’t have a lift in their home garage, so I pull out the trusty 2 ton floor jack and a jack stand.

As most Mustang owners know, they were built with subframes.  When jacking up the car with a floor jack place it on the frame, or use the standard scissor jack that attached to the seam at the rocker panel.  Either way once it’s in the air, DO NOT FORGET to put the jack stand under the car. Yes it actually takes longer to do the set up then to remove the bolts…but take the time to be save.

2 Ton Floor Jack

Floor pan plug that protect the bolts and studs.

These plugs pry out very easily.  I was able to get them out with just my fingers.  Once they are removed you’ll have access to the nut.  The distance between the opening and the nut requires an extension and the length of the stud requires a deep socket.  These were 1/2″.  The Mustang was raised in Arizona (get it?  First reader to drop a comment explaining “get it” wins a DVD.)  and all the plugs are in place.  This kept all the road grime and what not off the studs and nuts, they separated easily.

When you are done you should have this many parts.

When I purchased the Mustang I was told that the upholstery was replaced at some point. (Keep that in mind for later as well.)

[vodpod id=Video.11743606&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252Fremoval1.mp4]

 

As you can see in the video I wasn’t able to get the seat out of the car. I initially I figured it was because I couldn’t pull out level enough for the studs to clear the holes due to the fact that I was holding the camera. However, after putting it down I still shouldn’t get the seat out. So I climbed back under the car and found that there was a second nut on the right rear stud. I’m guess it was doubled up, when the last installer wasn’t sure whether they already but one on? And of course you can see by the previous picture that those two nuts not the same as the others.

Part III will be coming up in a day or so.
Thanks for reading.
Tim

Mustang Upholstery Part I

By | | , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
5 Comments

I know, I have a lot of work scheduled for the Mustang. This includes interior work and yes maybe doing it all at once would be a good idea. But I drive it a couple of times a week and the seat is getting worse. So I decided it needed to be fixed.

 

The kit is from TMI and I think I purchased it from a Mustang parts dealer, but I don’t recall which one. Here’s a couple of videos on it.

 

 

What I noticed is the black piping. I know that the car was re-upholstered before I purchased it, so I’m guessing that this was not original, at least they don’t make them in the reproduction world.

 

Coming up is the removal of the seat.

Thanks for reading.
Tim