Bill Overton – Angels Working Over Time (How I Survived Street Racing in the 1970’s)

Every now and then I see a good story on social media and I want to share it with my readers.  Bill Overton and I have been Facebook friends for a while now and I’ve been keep up with he and his wife’s struggles after the floods in Texas as well as some of his car projects and since I lived in Texas for about 8 years we sometimes share some Lone Star state antidotes.   He graciously allowed me to post one of his car stories and the pics below.  Thanks Bill!!!!

Earlier today I posted a thing about my brother’s V8 Vega. Several friends talked about that time when we had the cool cars. I got home and wrote this that I wanted to write for a while about my street racing days. Here is:

In the mid 1970’s I had a ’68 Camaro with several different engine and transmission combinations. Originally it had a 327 with a three-speed manual. I loved pulling the engine out to modify or drop in another one to see how fast I could go. I had a 396 Big Block with big valve 427 heads and four speed that really brought the Camaro to life. I loved driving fast. I loved street racing. I got the tickets to prove how much I loved it. Back then our real risk of street racing was losing our license for a few months, not like today where you can end up in jail and losing your car. I don’t recall there ever being a racing accident. I am sure there were, but I never heard of any.

This Bill’s 68 Camaro.

Friday and Saturday nights, I would go cruising Palmer in Texas City looking for a race. I had several other friends who would do the same. Other weekends I would cruise Clear Lake. Usually on Bay Area out by the High School is where we would end up racing. Most times I would race someone I knew but there were many times I would get challenged by a Mustang or Charger that was someone I never met before. I shied away from racing a Corvettes but occasionally, I would challenge one. The common tradition was if you lost, you had to give the winner your shifter handle. I had a small box on the floor behind the driver’s seat full of shifter knobs and handles, mostly Mustangs. I lost several of my Hurst T Handles occasionally.

The races I enjoyed the most was some kid would be out in his new Trans Am or Camaro. These were factory stock, but the owners believed they were the best of the best. Some of the big block Trans Ams held their own, but for the most part they were easy pickings. I recall one time I was on Palmer sitting at the light at 146 going west. A new Trans Am with an automatic started to challenge me. On this part of the road, as you leave the light you go up and over an overpass not too far from leaving the light. The light turned green and the Trans Am got the jump on me. I got even with him when I hit second. When I hit third, I started to walk away from him. At this point we were started to go down the other side of the over pass. Then suddenly, he disappeared, like he hit his brakes. I could see him in my mirror, so I pulled over. He was sitting on the shoulder. I backed up on the shoulder to see if he was ok. Turns out that when he saw me pulling away from him, he threw his transmission into park. I guess subconsciously he was thinking he had to shift. I looked under his car and saw transmission fluid draining out. I told him he could keep his shifter handle. He gave me an odd look, I guess he was not aware of the tradition. I never found out what ended up with him, I guess he was in real trouble when he got home.

Another time while cruising Palmer there was a ’63 Nova that had a straight axle. It was mean looking. I could see fender well headers, so he meant business. At the light I looked over at him and he was an older guy with his wife and kids. I thought that was sort of strange. He was challenging me, so I got ready. When the light turned green I got him on the jump. He could not catch up once I pulled away, so I won the race. After a race we would end up meeting up at a shopping center parking lot. When he pulled in he had his window down and handed me his shifter handle as he slowly went by, he did not stop. I felt sorry for him since his family was with him. Since I was 18 years old, I perceived him as an old guy, but, he was probably about 30 years old. I could imagine the conversation in the car after the race.

I remember hearing that the Texas City Police got motorcycles to help catch street racers, so I did not go there much after that. I went into Houston. Problem with going to the city is the racing was fast on the freeways. Back then the traffic was almost nonexistent compared to today. I remember one time taking the I-45 north to 610 west exit which was a turning single lane bridge at 120 mph. I did not feel like it was dangerous but looking back I was very lucky I did not go off that bridge. There were several other times that were like this. I know angels were watching over me even though at the time I felt invincible.

One time late at night I had just installed something in the Camaro, I really don’t recall what, but I was out for a test drive. The streets were empty, so I stopped, ran the RPMs up and dumped the clutch. The car was running like a beast, every gear pulled strong. Then suddenly there was something reflecting back at me in the middle of the road. My thought was some kid was standing in the road just watching me come towards him and he was not moving out of the way. I slammed on the brakes and went right off the road. Where I left the road was on a driveway and immediately I went airborne off the culvert. I was going down the shallow ditch when the next driveway was right in front of me, so I steered left back onto the road. My right-side traction bar caught in the dirt on the side of the driveway and I spun out in the road where I came to a stop. I sat there for a second, then looked to see what was in the road. A Great Dane was staring at me wondering what the deal was. I saw a porch light come on, so I put the car back in gear and drove off. The next day I went back to see where I went off the road. You could see the tire tracks and I followed them from where I left the first driveway. I was airborne for about 20 feet where the tire tracks started in the grass. I was shocked to see that I had missed a telephone pole by inches. This was the point where I saw how lucky I was.

Fast forward to 1985. I had just bought the Corvette I still have. I did not modify it very much, so I was not out looking for a race. I was just enjoying driving at night through downtown Houston with the T-Tops off. I was at a stop light just about to leave downtown heading west on Memorial. A Porsche 911 Carrera challenged me to a race. I knew I really did not have a chance, but no one was around this time of night so what the heck. The light turned green and off we were. We were staying side by side, I thought the Porsche would have walked away from me. Next thing I knew, there were the familiar lights behind us wanting us to pull over. I slowed down and pulled over ready to get the massive ticket. The Porsche kept going. The Officer walked up to the Vette, I handed him my license. He asked did I know the guy in the Porsche. I said I did not, that was the first time I saw him. The Officer gave me my license back and told me to slow down and he left. I sat there in shock, I just got off lucky! That was the very last time I raced someone on the street. I got back on the road to head to my townhouse where I lived at the time and as I rounded the bend on Memorial I saw several police cars behind the Porsche and the guy was spread eagle on the side of his car and they were searching him. I guess one of the Police was waiting at the curve for him. I drove past just ten mph under the speed limit. I have always wondered if they had been watching him for other reasons and maybe this was the thing to haul him in. I will never know but am thankful that I was let go. Another time Angels were watching over me.

I swore I would not talk about these events until my kids were over 20 years old, so they would not get the idea of doing something like this. Both my kids are very careful drivers, they get that from their Mom. Looking back, I have fond memories of driving and modifying muscle cars that young people today will never experience. Back then I could buy and modify a 1st generation Camaro for what I made mowing lawns. Now you can’t get one of those cars without a huge bank loan. I am sure I wore out an Angel or two. I never put a scratch on a car, so I know the Angels were busy watching over me.

Bill and his wife Jennifer.

Thanks again Bill for allowing me to share this story.  I hope the Angels are always working over-time for the Overtons!!!!

Thanks for reading.

Tim

Project SportsRoof Shifting Linkage Part III

Welcome back to Project Sports Roof (#ProjectSportsRoof).   The struggle is real!!!

You saw in the last video my replacement of the linkage that was lost by the repair shop (along with my new battery and started).   This repair shone the light (as often happens with older cars) on a previous repair.  Some might call it a hack and I get it,  there are times when you need to take short cuts, but as usual short cuts often have short life spans.

Take a look at the video:


 

 

When you have issues with shifting an automatic transmission and it’s related to the linkage you have the option of fixing it right or fixing it “wrong” (i.e., short cut).  At some point in my Mustangs earlier life the C4 transmission was swapped our for a used C6.  It seems that the C6 (from a 1972 Ford – which really doesn’t matter the C6 has changed much in all this time) had a broken shift lever.  Take a look:

Here the run down:

A is the broken shift lever.  What you should see there is something like this:

B is what is commonly called a ratcheting shift lever.  It’s a replacement that is ‘clamped’ on to the stub of the shift lever to shift the trans.  This is done because to replace the unit you have to drain the transmission, remove the pan, the filter and the valve.  This is a PITA.  Especially true,  if you just put the transmission in and filled it with fluid!!!)  So the after market ratcheting shift lever is common. This what the parts looked like when I took them off:

Custom hack

Of course C is a washer and D….well, D is a very special customization or it’s just a hose clamp.

As you can see at the end of the video the ratcheting shift lever was just sliding.  I suppose I could have just tightened clamp down and see if it shifted, but how reliable would it be…might as well fix it right!!!

Thanks for checking on #ProjectSportRoof.

I have more coming up on my 1973 Stang and more on Bill’s ProjectBeepBeep as well.

Tim

ProjectSportsRoof

 

Project SportsRoof Shifting Linkage Part II

Project SportsRoof Shifting Linkage Part II

Thanks for checking back in on #ProjectSportsRoof.  My 73 Mustang doesn’t what to get it in gear so I have to troubleshoot the shifting linkage.

For this round, I’m putting in new bushings to remove the slop when shifting.

Here is the video:


I’ll be tightening up the shift lever and linkage to make sure that it’s getting turned. I suspect that this may be the issue.

More coming up.

Thanks for reading.

Tim

Project SportsRoof Shifting Linkage Part 1

Welcome back to my 1973 Mustang project #ProjectSportsRoof. In the last post I mentioned that some how the shift linkage bar was lost when I had the car in a local shop to help put with the transmission.  They took another look around their place and I did the same…no luck.  …

1973 Mustang – Project SportsRoof – Compression, Rods and Heads

Thanks for check in on #ProjectSportsRoof. If you remember a of couple months back, shortly after bringing the ’73 Mustang home, I conducted a compression test on all the cylinders.  The 351C was running rough (to put it mildly) and smoked like a pile of tires on fire (only the smoke …

1973 Mustang – Project SportsRoof – Fender Removal

In case you didn’t notice, the fenders that were on #ProjectSportsRoof look as though car had driven into a half pipe at a skate park. Left Fender – major dent a lot of rebuilding necessary Right Side Fender – lots of crinkles, a few creases and good size dent. Now, these …

 

Project SportsRoof Shifting Linkage Part 1

Welcome back to my 1973 Mustang project #ProjectSportsRoof.

In the last post I mentioned that some how the shift linkage bar was lost when I had the car in a local shop to help put with the transmission.  They took another look around their place and I did the same…no luck.  So I purchased a replacement link. 

Take a look….warning the audio is not great in spots.

 

 

Well we are now moving into, what I hope is an adjustment phase for the transmission.  However, it might be something….more expensive!!!

Stay tuned.

Thanks for reading

Tim

14 best 1973 mustang images on Pinterest | 1973 mustang, Autos …
1973 Mustang – Project Sports Roof – Fender Fitment Part III. Ford Mustang Eleanor1973 mustangMustang Mach 1Car RestorationPower CarsMovie carsCar  …
 
average guys | Tumblr
The story didn’t match the damage… View On WordPress. 73 Mustang is back!! Project SportsRoof is Alive! 73 Mustang is back!! Project SportsRoof is Alive!
 

Project SportsRoof (73 Mustang) Gets the Shaft – Drive Shaft.

After many month and some craziness my 73 Mustang is back and it’s sporting a new drive Shaft.

If you recall when I purchased the Mustang the car looked like it had driven into a concrete tube, mashing in both front fenders and doing damage to the front end.  Here are the pics from the day I purchased it:

As you can see the damage on the fenders are similar.  The story didn’t match the damage but I didn’t care, just interesting.   What I didn’t notice then or even when I pulled it off the car was that the drive shaft had been welded about 5 inches from the rear end.  I also didn’t notice, when I removed the u-joints that the yoke was damaged – flattened on multiple sides.

When the shop tried to replace the u-joints the new ones would not go into the yoke.  (I wish I had saved the pic of that damage.)  The specialty shop give an estimate for what the repair might be, but after discovering the welded repair and the damaged yoke, they decided to replace everything.  What was really cool is they did it for the same price!!!

Here’s a look at the new shaft.  (NOT A CRANK SHAFT….geezzz  – you see…).


I have a lot of projects to get to on #ProjectSportsRoof and I can’t wait to get started.

 

Thanks for reading.

Tim

1973 Mustang Project SportsRoof – Exterior Walk-Around

Welcome back to #ProjectSportsRoof.  I run my car projects much like I run my IT projects.  You always have to know where to start and know the end game.   As with any project that isn’t being built from scratch, in other word, you have to work with what you’ve got, …

1973 Mustang – Project SportsRoof – Engine Bay Components.

I thought I’d take a minute and catch the readers up on #ProjectSportsRoof. I wanted to touch up some of the engine bay components, horns, vacuum canister and battery tray.  I didn’t want to alter some of these too much, I like having the numbers, logos and other info visible, not …

73 Mustang is back!! Project SportsRoof is Alive!

Well this day was long time coming.  My 1973 Mustang has finally returned home and it sounds fantastic!!

You followed #ProjectSporstRoof, you may recall  I ran into time issues and ability, to get the transmission mated back up to the engine and the components had to be placed back under the hood and new radiator installed. I had disassembled the engine, send it out to be bored (.040) and crank was milled a bit and rebuilt. That was over a year and half ago. In Feb of this year I decided to get some help getting it running.

 

 

A relative had an acquaintance that was starting a second shop here in Tucson to match the success of their first shop that was about an hour way. I wanted to keep the car local so I could check in on the work being done. So I asked and received an estimate and the price was fair. My only stipulation was that the car stay in Tucson and not their out-of-town shop. What I didn’t know was that their idea of starting a shop was to use a garage at a start-up/pop-up used car lot. In return they would be doing really cheap work for the car dealer in lieu of paying expensive rent.

There’s very few times such a plan works out and one day my Mustang disappeared and I wasn’t informed. I eventually (weeks) got a hold of them and found that my car was right where it I didn’t want it…at the out-of-town shop.

Now, I understand business deals falling part, especially when you start-up with little capital and hook-up with another start-up with little capital. What I didn’t like was not knowing that my car was now no longer in the city. Checking on the progress was going to be impossible and as it turned our some of my parts were left/lost at the Tucson shop. An additional problem was that I forgotten to pack a few parts and it took massive coordination effort to get the items to them.

 


So lets total this up real quick:
1. Missing car
2. Found car
3. Missing/Miss placed parts
4. Lost parts
5. Long periods of un-returned text and voice messages.
6. Lack of trust.

Number 6 is huge!!!

If you don’t have trust in the shop then everything, even the normal things, that arises when you are restoring a car are suspect. Combine that with a newly rebuild engine, never fired-up, well lets just say I was concerned that the proper cautions would be attended to and I’d end up with a pile of ugly Mustang parts in my driveway that I’d have to get rid of or sell the house to afford to fix it!!! So I held my breath and reluctantly had them push on.

Only two real issues came up, one was the drive shaft, it has been repaired a some point in the car’s history and poorly done at that and the yoke was in rough shape. A local shop said that could fix it for a set price, they couldn’t and ended up replacing the shaft and for the original price quoted. The other issue was a panic call/video from the shop, showing my Mustang vomiting radiator fluid in the air like Hawaii’s Kīlauea. That of course is what happens when you put a Windsor thermostat in a 351 Cleveland.

So I reduced my expectations and told them all I wanted was for the car to be mobile. I wanted it driven off the trailer and driven in my driveway and I’d be finished with them. The manual shifting you saw in the video is a result of a lost part.

Now #ProjectSportsRoof is back and I can get on with all the little projects that are left…like installing the shift linkage…yea…that should be first!!!

 

Thanks for reading and I can now say…there’s more coming up for #ProjectSportsRoof!!!

Tim

1973 Mustang Project SportsRoof – Exterior Walk-Around

Welcome back to #ProjectSportsRoof.  I run my car projects much like I run my IT projects.  You always have to know where to start and know the end game.   As with any project that isn’t being built from scratch, in other word, you have to work with what you’ve got, …
1973 Mustang – Engine Bay Work

If you look back at #ProjectSportsRoof post you’ll see the condition engine bay.  During those videos I mentioned that I was going to clean it up and hit it with a rattle can.  Again this isn’t going to be a concours restoration, it’s going to look nice and it’s going …
1973 Mustang – Project Sports Roof

As I posted before, after a vigorous (not read ‘desperate’) I finally found my next personal project.  The 1973 Mustang Sports Roof  Fastback is what I settled on.  Now we start the project that has been dubbed #ProjectSportsRoof (yes I find it necessary to use the ‘hash’). 1973 Mustang Color …
1973 Mustang – Project Sports Roof – Pertronix Ignitor Update

Well win some and you lose some.  If you’ve seen my other posts related the replacement of the points and condenser for the 351C you’ll notice that I gave conversion high marks.  This was all based on the years of use I got out of the conversion I did on …

 

Restoring Tach for 68 Road Runner – Project BeepBeep

Bill gets “techie” in a “tachful” way as he restores the rare Tach option on his 68 Road Runner. #ProjectBeepBeep

 

 

More coming up!!!

Thanks for reading!!

Tim

#ProjectBeepBeep

#ProjectSportRoof

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …
Project BeepBeep – 68 RoadRunner Disc Brake Conversion – FINAL CHAPTER!

Welcome back to the #ProjectBeepBeep.  We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner. Did I say this is the final chapter?   Well….     Sometimes during a project you just can’t afford the time to do a video, especially when you have a friend …

 

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Wrap Up

So you can grab a couple more tips for Valve Cover Gaskets installation and you get to hear BeepBeep running like a top….love that engine music!!!


Some great tips and one more project down for Bill and BeepBeep!!

Coming up next an update and #ProjectSportsRoof and BeepBeep gets tachy (get it?….not Tacky but Tachy!!!)

Thanks for reading.
Tim

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Part II

Bill gives some tips on cleaning up the valve covers and tries valve cover studs.


Wrap up of the valve cover gasket replacement is up next.

Thank for reading.

Tim

#ProjectBeepBeep

 

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn. More coming up …

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted. Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …

 

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Part 1

Continue following Bill’s journey to a “Leak Free MOPAR” for his 1968 Road Runner. #ProjectBeepBeep

Wild E. Coyote is back!!!  Apparently he’s been working at Summit Racing!!!!

BeepBeep is getting some new valve cover gaskets!!!!  But will that stop the leaking?!?!?!?!

 




 

More coming up.

Thanks for reading/viewing.

 

Tim

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …