No gadgets, no electronics, no error code readouts.
Just a ratchet, socket, feeler gauge and a set of 8 Autolite 45 spark plugs. Oh and a crappy old garage radio, sometimes playing music sometimes just static.
It takes me back in reverse chronological order. Back to some of the important “car” stages in my life. Back to my 82 Camaro, back further to my 69 Dodge Dart, back to my first 1966 Chevy (in 1976).
It takes me back one more stage, working in one of my father’s garages where I worked long days in the summer on customers cars and back a bit further watching my father work on our 61 Chevy Belair and his old Dodge pick up. Even further back to my grandfather’s garage with the half dirt half cement garage floor, watching the two of them trying to get that old early 1950 Ford or Chevy truck (we called it the “doodle bug” ..and no I don’t know how it got its name) running.
There was always a radio playing somewhere nearby often a baseball game or country music.
That’s one reason I love my 70 Mustang. Working on it takes me back to those days. Today I could have been 12 again, leaning over the fender of a real American made car, just the basic tools and an old radio tuned to a sports station recapping March Madness 2011. It could have been 1970 again.
Finished up the job and fired the Mustang up and that started the way-back machine again.
Citroen DS had the first volume production of cars with caliper/disc brakes in 1955. Although production was on the light side that
year but picked up in 1956.
What wasn’t 100% correct and why:
– 1949 Crosley – yes it had attempted to use disc brakes on all four wheels. They used Goodyear/Hawley and used aircraft calipers.
These were not designed for the stop and go traffic. After 6 months all the Goodyear/Hawley brakes were removed and replaced with the standard drum brakes. Although they are often considered the first American car to sport disc brakes even if the production run only lasted a few months.
Crosley Disc Brake Set Up
– Some might say that the 1902 Lanchester in England was the first, however the disc was thin copper and didn’t fare well.
1902 Lanchester's Disc Brake
– The 1949 Chrysler Imperial had a disc brake option, but it did not function like a disc brake system with a pair of disc pressing against in the inside of a drum.
– There were a couple more manufacturers in the mix
Jensen (often considered the first) used four wheel disc brakes on there 1956 Deluxe, but not until Oct of that year and
production was only 50 some cars.
Austin-Healey used Dunlap disc brake on it’s 100 but it was a limited production race care where as Jensen was a street car.
Jaguar equipped their Le Mans winner in 1953, but again not a production car.
Triumph use Girling and Dunlop disc brake set ups in 1955, but mainly as tests (during the same Le Mans where Jaguar won). Girling impressed them the most, but it wasn’t until late 1956 that they began producing road cars with disc brakes.
As I have mentioned, I love the old station wagons. I love the fact that they are being restored. I even like the fact that many are getting the power plants they needed back then transplanted. Although I have to admit I am growing bit tired of the seen a “Corvette” engine between the front wheels – maybe just the fact that they left the “Corvette” labeling on them.
There were some beauties at this show.
All Custom Wagon 1
Nicely Done.
Here is a nicely done Plymouth:
Plymouth Wagon
Love the Nose of this Ply - They really didn't want any one near it.
Now you can call me a DORK but I love this Ford Wagon.
Ford Wagon
Love the Grille
Hey..I even love the hood ornament.
This Torino Wagon, although banged up and hood all mis-aligned, it’s still a keeper with good tread and not too shabbby wheels. I think it’s a keeper.
Ford Torino Wagon.
Lowered but still standing tall was this beautiful Chevy Wagon.
Loving the paint and the roofline!!
I’ve got a few more post coming up shortly before wrapping the Goodguys’ car show trip.
So I left a couple of photos out of the last post. But I wanted to show (IMHO) a couple stars of the show and one of the strange one.
I covered the Galaxies and 500’s, however, here are a couple more: (Come..on..you would be able to pick just one or two either!!!)
(In no particular order)
Crown Victorian (before the exploding gas tanks and cop lights)
Oh..the Chrome!!
Did I mention the Chrome?
Just look at that smile..I mean bumper!!!
Not really comparable to the Crown Vic – this Starliner was, although not original, very nicely done.
Ford Starliner with a little custom work.
Oh..check out the intake setup on that Starliner!!!!
OK.. I know at least one of my readers will like this next car.
It is a 1965 Ford Mustang Station Wagon. Originally a concept created by William Sibo (designer for Ford Motor Company). He actually built this car from the original drawings. Car is currently owned by Ken Berger. The car now has a 429, rack and pinion steering C-6 auto trans, coil over suspension and power brakes, A/C and stereo system.
No Middle Road - Hate it or Love it.
There you go!
I can’t get past the that rear end….but this helps:
Let me start of by saying, WOW!!! Of course that’s what I say every year I attend.
There is a lot of things to do (oh, not just car stuff but one of my better-half’s favorite — shopping — everything from jewelry to purses to beds) , people to talk to and cars, cars and cars. Car people are at their best when they are around their cars.
This year was a bit different for me, yes, I sat a watched the auction a bit, I really wanted to talk to some of the vendors (I have a project to work on) and wander around the various staging areas.
Some of my favorite vendors were the Karl Kustom Corvettes. These are re-bodied C6/Z06 underpinnings/platforms and put some of the most popular Corvette bodies the ’63 split window coupe and the 67 Roadster. These are outstanding looking cars and if they perform like the Z06 and I understand the auction price. Oh and it is not just the bodies, they’ll take your old LS3 and knock it up to 599hp and your lame LS7 to 650hp…I’m just saying!!! Check them out at: http://www.karlkustomcorvettes.com/
Normally they have some sort of racing event or car demo, last time I attended -2009 they had 4 wheel drive area to the lasted models of Jeep and Hummer, and drifting demo. This year if you registered with Ford and Chevy (they walk you up to a computer and you punch your information) you were allowed to drive two of their latest models offerings. Since I’ve driving the Mustang and the Corvette before, I opted to drive the SHO Ford Taurus and the 2011 Camaro convertible.
2011 Ford Taurus...Oh..don't laugh..this ain't your daddy's Taurus
2011 Camaro Convertible
Let me say this about the Taurus SHO …Surprising!!!! It doesn’t look like much…but get behind the wheel and you’ll feel the kick. I managed to get the rear end to slide around (much to the Ford reps surprise) on the short track they had set up. That car says “sleeper” all over it, but you’ll shock the guy next to you taking off from that red light on your way to work. (Come..ON!!! You know you do that red light mini drag thing…yeah..ya do!!!)
The Camaro was awesome as well. I pick up one if I had room to park it.
Additionally they had the Bondurant guys there and they’d give you a spinning the their Z06 as well as a racing school out of Utah, that made it known to me that they were a “real” racing school and used real race set Mustangs unlike the Bondurant’s “street’ cars. They had a couple of cars there’s as well.
Here’s a few more pics and I’ll finish up a bit later.
Bagged Restro Mustang
Entry on to the Stage. A beautiful DeSoto on it's way to the block.
This is the part of the engine series where I list the uses for the power plant. The 283, as I mentioned, carried Chevy engines to the next level, by being the first engine that car manufacturers were able to coax out the same horsepower as the displacement.
From 1957 (its inception) to 1959 the 283 was the base model V8 for nearly all Chevys, coming in a 2 and 4 barrel versions with the 4 barrel being the main power plant for the Corvette. In 1958 the 4 barrel version was dubbed the Super Turbo Fire with 220-230 hp with 9.5:1 heads. (Toss that name in with other versions like the 348 Turbo Thrust and the Super Turbo Thrust which sported 3 two barrel carbs.) The other premier engine during that period was of course the FI used in the Corvette with 9.5:1 and 10.0:1 compression.
The 283 Super Turbo Fire
1960-1961 saw the base 283 drop to a 2 barrel and muster just 185 hp. The bright spots were engines used only in the Corvette, the dual quad and the FI engines. 1961 also saw the 283 go MARINE – nope not joining that elite military branch but rather Chris-Craft the boat builder, sealed it tight and give a duty on their Cavalier Cruiser vessel.
Marine 283 for Chris Craft Cavalier Cruiser
Not much changed in 1962-1963, at least nothing very exciting. Chevy dropped the dual quad as an option (although I bet you could still get it done) and the 283 dropped in hp to 170 and as was no longer an option for the Corvette, but was added to the Impala.
As perhaps a last chance to breathe some life into 283 Chevy gave it a bump in hp to 195 and it found a new home in the new Chevy II in 1964 and 1965 a 4V was added give the iron 220 hp and another new home the ’65 Chevelle.
But that couldn’t save the 283, it was time for Chevy to move on and 1966 was its final year. It served as the base V8 that year as an option for the Chevy II and Chevelle and the other Chevy sedan’s, like my 1966 Impala.
Although it seems like I give this a quick pass (not a long list of models) the 283 served nearly all models of Chevy from 1957 to 1966, listing them all would be, well ..repetitive . Interesting enough it never crossed over to the other GM brands. But it did make it into the Canada made Studebaker cars in 1965 and 1966.
During the it’s life span the 283 was offered with every transmission available for that year. From the torque glide to the power glide automatic transmissions and even a few 3 and 4 speed manuals. Additionally, I was surprised to find that it was offered with air suspension with some automatic.
Did the 283 really die? Nope it received the cam from the 327 and became Chevy’s 307!!
Notable:
– The 327 followed the 283 and although it was an entirely hunk of iron, to keep cost down Chevy used some 283 components initially.
– GM’s RPO 579E option on the 283. 579E was called the Air Box. It was perhaps the first production cold air induction system(at least for Chevy). It consisted of a plenum box mounted on the fender well of the driver’s side. The box was fitted to an opening in the bulkhead next to the radiator with an air filter inside. The duck work ran to the fuelies injection unit. Records indicate that there were only 43 produced in 1957.
1957 Corvette AirBox
– Corvette Fuelies had a reputation for hard starts and finicky operation and many were replaced with the standard carburetor (1957)…Flash Forward the 1984 Corvette Crossfire (fuel injected) (Of which I was a previous owner) suffered from finicky operating and some were replaced with carburetor set ups.
I hope you enjoyed this little bit of engine history and as always, thanks for reading.
The correct should be – the 283 received the “crank” from the 327 (not the cam) and became the 307.
