Continuing on with the leaks and Pertronix install on the 351C, below you’ll see the cleaned up valve covers (BTW – only the right side was leaking – which may explain the gunked up spark plug).
As I was cleaning up the valve cover gaskets and notices a couple more issue that need addressing.
Let me know your thoughts on the transmission cooling lines.
Finally we get to the main event for this past weekend wrenching, the install of the Pertronix Ignition system. (Yeah…I didn’t think I’d get here either.)
This a relatively easy install, unless you are me!!!! You’ll see in the video – it really wasn’t related to the Pertronix.
Here’s what is being installed.
It will replace these.
Now I’m not going to show the install CJ Pony had a good video on the process and I don’t have a camera guy to take the shot. Here’s a link: CJ Pony Install
So the audio is not that great on this clip but it is running better then previously. You’ll notice toward the end of this clip…a new problem!
I’ll address that in the last part of this section.
There is a quick walk-through of the 351C tucked between the fenders of the 1973 Mustang Sportsroof. (It took about 5 takes to get this video…a slight improvement.
#ProjectSportsRoof will be the way I want it, which I haven’t nailed down yet, so suggest way by dropping me a comment (got your crate motor idea swimming around in my head, Bill) and that will happen fast or slow and cost …
Welcome back to #ProjectSportsRoof. I run my car projects much like I run my IT projects. You always have to know where to start and know the end game. As with any project that isn’t being built from scratch, in other word, …
I get a lot of questions on just what I’m going to do with the Sports Roof. Some of those are posed as inquires of interest and others can be interpreted as “What the.
As I posted before, after a vigorous (not read ‘desperate’) I finally found my next personal project. The 1973 Mustang Sports Roof Fastback is what I settled on.
No I’m not going to ask for donations…although….well…nah! HEY…maybe a Go Fund My Ford website? Well if any parts house (@NPDLink – you guys rock), restoration supplies or tool distributors send something – even a t-shirt, I’ll post up an ad on AGCarRestoration.com for you, heck I’ll wear the shirt during one my unprofessional videos!!! Um…not that I’m doing anything unprofessional….just not a professionally produced videos.
Seriously now, I was asked to day – thanks Bill for reminding me that I should touch on this – what my budget is for this project. My real answer is I don’t have one. Not…”I don’t have one” as in it’s unlimited – remember average guy, average budget – more like “I don’t have one” as in “I don’t know where that moneys coming from” .
I didn’t set a budget with my 1970 Mustang, things just happened and I went with it.
1970 Mustang Mods for 300 HP
It will be the same with this project. #ProjectSportsRoof will be the way I want it, which I haven’t nailed down yet, so suggest way by dropping me a comment (got your crate motor idea swimming around in my head, Bill) and that will happen fast or slow and cost what it costs. I’m not going to flip the car – this one is a keeper. (So was my 1970, up to a certain dollar amount.)
This project is different than the ’70 Stang, I want this one to be more of my work than the ’70 was – although I did a lot of work on that beast. This project will be at a slower pace, I think, than the 1970. (If you recall the the ’70 Stang was helped along by the fact that driving a 6 cylinder (250CID – with 159,000 miles) with the A/C on was like peddling a bike up the Washington Monument and the young kid who was to busy entertaining his GF to stop behind me at a red stoplight.
This one will be different.
Like this? Maybe.
Coming up tomorrow will be the 351C walk-around (actually performed that a couple of days ago, but videos were…bad!! I even lost the first segment).
As I posted before, after a vigorous (not read ‘desperate’) I finally found my next personal project. The 1973 Mustang Sports Roof Fastback is what I settled on.
Welcome back to #ProjectSportsRoof. I run my car projects much like I run my IT projects. You always have to know where to start and know the end game. As with any project that isn’t being built from scratch, in other word, …
As I posted before, after a vigorous (not read ‘desperate’) I finally found my next personal project. The 1973 Mustang Sports Roof Fastback is what I settled on. Now we start the project that has been dubbed #ProjectSportsRoof (yes I find it necessary to use the ‘hash’).
1973 Mustang Color Code 2B.
I run my car projects much like I run my IT projects. You always have to know where to start and know the end game and the key to that is knowing what you are starting with. As with any project that isn’t being built from scratch, in other word, you have to work with what you’ve got, the final goals may change based on what you start out with and/or find later. To help reduce the surprises, there will always be something that pops up unexpectedly, it’s a good idea to begin with an inventory of what we have and what is needed and a logical starting point. We (as in me and you the reader) are at the beginning of the project.
Coming up next are the a few videos (maybe on only three, never sure, since the camera guy and I are one in the same) will be my first inspection.
Please feel free to interject via a comment or an email, always welcome the discussions.
1973 Mustang SportsRoof. If Mach 1 Mustangs have gotten a little too pricey for you, may I suggest a less flashy fastback like this? The 351 under the hood isn’t as powerful as the top-of-the-line Cobra Jet, but it’s the same …
With the near completion of a customer’s project (1975 Model 110 VW) and the beginning of another customer’s Jensen Interceptor, I’ve finally completed my search for my next personal project.
Having recently completed and sold my 1984 Corvette and my 1970 Mustang, I’ve found my next project.
Introducing “Project SR”. It is a 1973 Mustang Sports Roof. The VIN breakdown looks like this:
Born: April 1973 in Dearborn, MI (Code F)
Body Series: 02 Sports Roof Code: 63D
Engine F Code – 302 2V V8
Color Code 2B – Bright Red
Trim Code GA – Black All Vinyl, Mach 1 Luxury
Axle Code: 8 – 3.00:1 gearing
Transmission Code: W – C4 Automatic
DSO – Originally delivered to dealership in Omaha, Ne. and then shipped to Arizona(??)
That’s how it left the factory, however, that is not how it’s sits today. Here’s a little back ground.
Project “SR” is a rescue project for the second time. The first ‘known’ attempt was by the immediate previous owner. Pulled from a junk yard by father/son combo for salvation. This team has spent some meaningful time on this project. As the factory codes show the car was powered by 302 2V as built. When the father/son team pulled it out of the desert sun, it had 351 cid engine that was seized. That is how is end up with the current 351 2v from a 1972 Mustang. Putting the power to the rear wheels as it drove off the assembly line was a C4 automatic transmission, after all these years it now has a C6 automatic. Front end was completed by the team and then a couple fateful fender benders (both front fender on different days) and a desire to build a rat-rod had led this ‘Stang to it’s new home – my drive way!
Why pick this particular car out of the thousands I’ve viewed online and 30 or so I’ve looked over? Well, I have a thing for Mustangs (and Corvettes) and this one is significant. It is the last year for the big Mustangs as the 1974 models were…..um…..different. What’s more the Code 63D Sports Roof/Fastback has a limited production for the 3 years is was offered. 1971 shows a production number of for the 63D 23,956 units, 1972 end with 15,622 Sports Roof examples and 1973 bottoms out the list with only 10,820 units – that is less than production of convertibles. So out of the total Mustang unit produced of just over 518,000 for 1971-1973 only 53,358 63D’s were produced. So you have last year production for the big bodied Mustangs and for the 63D and the lowest production.
So we are going to have some fun restoring this one and my followers on WordPress, Twitter, Facebook, Pinterest and a couple more will be able to keep up. Search on #ProjectSR.
Over the next few weeks I’ll do a project shake down that will uncover what it needs which will help me arrive and what I want to accomplish with this beauty. Follow along and I’d love to hear your thoughts, suggestions, hints and tips.
1973 Mustang SportsRoof. If Mach 1 Mustangs have gotten a little too pricey for you, may I suggest a less flashy fastback like this? The 351 under the hood isn’t as powerful as the top-of-the-line Cobra Jet, but it’s the same …
In the pantheon of lust-worthy Mustangs, the Special Service Package cars tend to hang out at the tip-top of the mountain. Fitted for police pursuit duty, the cars came from the factory with a bushel of parts to go faster and stop shorter. The two cars pictured here are reportedly the first SSP Mustangs ever built. Ford whipped them up in December of 1981 as test cars for the California Highway Patrol and the State of Texas. Of the machines CHP tested that year, these two were the only cars to pass the department’s performance tests. California ordered 400, and the SSP program was officially under way.
Owning one of these cars or any former police car is a great part of the car collecting/restoration hobby. But keep in mind there are rules for what equipment/logos, etc. that can be on these cars while they are driven on public streets. Each U.S. state has different rules, research those.
CHiPs, I met a few of those guys driving the roads of Southern Cal.
One of my readers stopped by my Facebook page for Average Guy’s Car Restoration, Mods and Racing and dropped me a note about his 1971 Mustang Mach 1 he is restoring.
He wrote: “Guys – been lurking here and can’t get enough. I’m restoring a 1971 Mustang Mach 1 which I just made a video of – would be great if everyone could hit “LOVE IT” on the video link: http://bet.votigo.com/fbcontests/showentry/Ford-Contest-1/137096”
Here is the video he posted. Lot of work went into this car.
Thanks for reading.
Tim
RT @Motor_Roar: #MuscleCarMonday 1971 Ford Mustang Mach 1 http://t.co/3DDyjrJ8LN
2015 Mustang starts production at Ford’s Flat Rock Assembly Plant; car to be exported globally for the first time in its 50-year history New Mustang goes on sale this fall in the United States, and in more than 120 countries next year Mustang sets new performance and dynamics benchmarks for the brand with world-class handling, more precise steering control and enhanced ride comfort.
FLAT ROCK, Mich. — Ford began production of the all-new 2015 Mustang on Thursday at its assembly plant here. The first 2015 Mustang off the assembly line was a red GT coupe that has been sold to Texas dealer Sam Pack for $300,000. He is donating the …
The information posted over at Mustang6g says that Tuesday September 10 is the ok to buy date your 2015 Mustang. According to Mustnag6g this means that dealers will have the ok to begin selling stock inventory. Special orders on this date will then begin production. According to the post at Mustang6g this is to limit any glitches on special order vehicles. The 2015 Mustang convertible wont’ begin production until September 15. Its ok to buy date is not slated until October 27.
As we get closer and closer to the 2015 Mustang getting into customer hands, we are also starting to see more previews of the various aftermarket Mustangs that will be built. We’ve earlier shown you versions from Saleen, Steeda and Galpin Auto Sports, and now we can show you the newest one from Roush. The company today released a photo with the outline of what is presumably a 2015 Roush Mustang on their Facebook page, although with the exception of the 5-spoke wheels it’s impossible to tell some of the design changes.
Roush didn’t offer up much information either. They simply said to “keep a close eye on our page during the coming weeks as we start to pull back the curtains and reveal what Roush Performance has planned for the 2015 Ford Mustang.”
From the looks of the image we suspect the photo is real and not just a rendering like other previews. This wouldn’t be a huge surprise, as Roush has close ties with Ford and often collaborates on engineering. In the past Roush has had early access to create parts for the Mustang and often is first to market with their aftermarket version. We fully expect to see a Roush Mustang in the next couple months, so stay tuned!
While we don’t know anything about the 2015 Roush Mustang, we do have the shadowy image above that teases the next generation aftermarket tuned Mustang and thanks to my very questionable photo editing skills – we have an even better look at the fine …
One of my readers stopped by my Facebook page for Average Guy’s Car Restoration, Mods and Racing and dropped me a note about his 1971 Mustang Mach 1 he is restoring.
He wrote: “Guys – been lurking here and can’t get enough. I’m restoring a 1971 Mustang Mach 1 which I just made a video of – would be great if everyone could hit “LOVE IT” on the video link: http://bet.votigo.com/fbcontests/showentry/Ford-Contest-1/137096”
Here is the video he posted. Lot of work went into this car.
Thanks for reading.
Tim
RT @Motor_Roar: #MuscleCarMonday 1971 Ford Mustang Mach 1 http://t.co/3DDyjrJ8LN
