I decided the time had come to get the front clip taken off the Wagon. I wanted to get the front frame cleaned up, and do the front end by the end of summer. I am shocked at how few bolts actually hold the whole front clip onto the ’58. 11 bolts, disconnect some wiring, and you can lift the whole front Clip (Dog house) off in one piece. It’s taken me longer to change the oil on a car than to remove the front clip on this car!
First I had to remove the front bumper with brackets attached. That was fine, except for the one chrome bumper bolt on each end of the bumper. They fought back pretty good. I had to sawzall them off.
I was without any help to lift the front clip off, so I had to tilt the front forward onto some large Foam cushions I had saved out of an old travel trailer I had gotten rid of years ago. They are a perfect for laying under vehicles to work on, and for cushioning large loads like this.
Next I will be removing the wiring from the front clip and saving it for future use. This front clip needs work. The front fender bottoms are rusty, and the hood is so badly rusted it is of no use. So either I will sell this old clip to someone who has nothing, or dismantle it, save parts and scrap it.
Richard Cleer stumbled onto the 1946 Ford coupe his uncle built in the 1950s while searching for a flathead engine. He had to trade this tractor to bring the Ford back in the family.
By Angelo Van Bogart
Richard Cleer of Ipava, Ill., considers himself a Ford man and an International Harvester man, and he probably never thought he would have to betray his allegiance for one to get the other. However, that was the price Cleer had to pay when he retrieved a family heirloom earlier this year.
When Cleer found the 1946 Ford five-passenger coupe his uncle had hot-rodded in the 1950s just 25 miles from his home, he was actually following a lead to a 1939 flathead engine for another car.
“A guy said he had a 1939 Mercury flathead in the weeds,” said Cleer. “The engine in the weeds wasn’t right, so he said, ‘Maybe I have one in the barn.’”
The barn Cleer was taken to last fall was so overgrown with vines, trees and tall grass, it would have taken Indiana Jones to find it. When the owner cracked open the weathered red barn doors, Cleer saw the unmistakable shape of 1940s American iron.
Had he not been led to this overgrown barn, Cleer had little hope of ever stumbling onto the Ford his uncle built. Note the postwar Chrysler lurking in the barn; it was parked in front of the Ford.
“When he opened it up, I said, ‘That looks like my uncle’s old 1946 Ford,’” Cleer said. But he was mistaken. The car at the front of the barn was a 1946-’48 Chrysler. His uncle’s 1946 Ford was actually parked behind the Chrysler.
Cleer asked where the seller had bought the Ford coupe, and the man repeated the name of Cleer’s uncle. It had been parked since the early 1960s, not long after Cleer’s uncle sold it to the man. Cleer was able to further verify it was his uncle’s car, because all of the tell-tale modifications he remembered from his uncle’s Ford were still present. Blue paint still covered the Ford’s body, the push buttons were still in place to open the doors and the hood and deck lid had been de-chromed just the way Cleer remembered his uncle’s car.
Since the doors opened electrically and the long-parked Ford’s battery was dead, Cleer couldn’t determine whether the knob his uncle installed to open the deck lid from behind the seat was still there. Undeterred, he crawled in the side windows for a better look inside. Sure enough, that old knob was right where it should have been.
Despite Cleer’s excitement, he was told the Ford wasn’t for sale. Two months later, Cleer had worn down the Ford’s owner, although the Ford still wasn’t exactly for sale.
“He said, ‘If you want that car, you have to trade me for a John Deere tractor,’” Cleer said. “Well, I’m an International-Harvester man — I worked for International Harvester.”
Despite his allegiance, Cleer began searching for a John Deere tractor of the same value as the Ford, and one that would also satisfy the seller, to complete the trade.
“It took until May or June to find a tractor, because I didn’t want to get one he didn’t want and be stuck with it,” Cleer said.
Eventually, a John Deere was located at a dealership in Missouri, so Cleer called the Ford’s owner and asked him to call the dealership to make sure the tractor met his approval.
“He had the dealer run it for a half-hour, and he said it would be fine,” Cleer said.
After Cleer purchased the John Deere, the next challenge was retrieving the Ford from its approximately 50 years of storage. Although the brakes weren’t stuck, the Ford had been parked on a sandy floor, which helped preserve the sheet metal, but also caused the car to sink into the ground.
“It took four people five hours to get it loaded on the trailer,” Cleer said. “It had two flat tires, so we loaded it with used tires.”
After five hours of work, Cleer was finally able to retrieve the Ford from hiding. It was in remarkably good condition and exactly how his uncle had built it.
Once it was in the daylight, he finally had a good idea whether all of his efforts had been worthwhile.
“When I looked at it the first time, I didn’t have a flashlight and I didn’t know what it looked like,” he said. “It’s in really good shape — it’s really unbelievable. There’s just a little rust in the driver’s floor.
“It still has the same paint, and the interior my aunt put in it,” he added. “It looks like the seats and door panels are drape material.”
The Ford is still powered by the 1950 Mercury flathead with a 4-inch stroke that Cleer’s uncle installed with high-compression Edelbrock heads and dual 94 carburetors on an Edmunds intake. Cleer has already begun rebuilding the setup to make the Ford roadworthy again.
The 1950 Mercury flathead in the Ford still has its Edelbrock heads and Edmunds intake.
“I’m going to leave it that way,” Cleer said. “I had to pull the heads because it wouldn’t turn. I do all my own engine work but the machine work, and the machinist said [the engine] is in pretty good shape and the heads have never been ground.”
“It’s a good hot rod,” Cleer said, and one worth temporarily forsaking one tractor allegiance for another, even if the John Deere had the last jab.
“We had to use the tractor I traded to pull the cars out of the barn, and after we got the car loaded, I had to load the tractor and deliver it to his farm.”
When I first got the car, it had to warm up forever or it would stall. At stop lights, I had to be careful to feather the gas pedal to keep it from quitting on me. I enjoy an occasional adrenaline rush, but not at every intersection!
Anyway, our first order of business was to get the car running better. This would end up taking a while as we troubleshooted/fixed/replaced/fiddled with different parts of the engine over several months.
First, we ordered a rebuilt carburetor and my dad and I installed it. With the new carb, the car ran strong on straightaways with no hesitation but ran rough at slow speeds. After that, we did a tune up, replacing the spark plugs and wires, distributor cap and rotor.
Next, I drove the car to my brother’s place and he adjusted the fuel/air mixture, fiddled with the vacuum advance tubing, and reconnected the kickdown rod. The hesitation was 99 percent gone after all that. When I drove home I got stuck in bumper-to-bumper traffic and the car never stalled or overheated. Yay!
The last piece of the puzzle was the fuel pump, which was going bad. As soon as we replaced that (only $30), the car ran better than ever. Now I can drive it without worrying about being stranded (although I do have roadside assistance through my insurance so I can get a tow home if that happens).
Update: Even though the car is more reliable and runs smoothly now, the engine leaks oil, and could use a reseal. I’m hoping to get this done in September/October 2010 (more on this later).
In November 2004, on a whim, I purchased a 1977 Mustang II off eBay. I don’t know the first thing about restoring old cars. But I had one of these when I was a teenager and it’s always owned a piece of my heart.There have been times when I’ve thought to myself–What were you thinking! I’m a mom of twin 6-year-old boys, with no extra money, and no mechanical experience! But I just love my car. Whenever I’m stressed, I drive it around town and I feel better.
Restoring my old Mustang–just keeping it running–hasn’t been easy. For a girl who never even
changed oil before, I had a LOT to learn. Progress is slow and I’m not quite ready to rebuild an engine, but I’m proud of what I’ve accomplished so far.
A Girl Gets In Over Her Head Restoring a 1977 Mustang II
Pretty soon after getting my car, I decided to switch out the spoke-y hubcaps for some cooler looking wheels. Looking through an old Mustang II brochure, I saw a white with red stripe Cobra II with white lacy wheels and liked the look. Matching wheels to paint is not a look that appeals to everyone, but I thought that white wheels would be unique and add some personality to my otherwise ho-hum coupe.
I bought a set of 4 vintage white lacy spoke wheels from another II owner, along with four chrome center caps. As you can see from the pic, above, the wheels needed a lot of work. They’d been sitting in someone’s garage for years! I had them stripped down to the metal and powdercoated white. The picture below shows the powdercoated wheels and new tires mounted on the car. They look SO weird without the pinstripe! At this point I was thinking, hm, maybe this wasn’t such a great idea.
Locating someone to paint the pinstripes was more challenging than I thought. Apparently pinstripe painting by hand is a dying art. But I did eventually find a guy who owned a sign business (Shane’s Signs) in Manassas, VA who could do it. When I saw the final product I knew I had made the right decision about the wheels.
I might change them down the road but for now, I think they add a lot to the overall look of my coupe.
As it turned out 1977 was one of the lower sales years. The average since 1974 was around 180k or more. For 1977 the sales number fell a bit short @ only 150K. (Believe it or not that was more than Mustang sales for the 1971, 1972 and 1973 models!!).
There was some excitement for the 1977 Mustang. For one thing the Cobra II could be had in white with red stripes and if that doesn’t stop your heart the options chrome luggage rack for the ’77 hard top coupe will.
You might be thinking, “Hey wait a minute!!! Did he say ‘hard top’? ‘Hard top’ as in there was something else? Like a CONVERTIBLE? THE CONVERTIBLE IS BACK?” Well YES, if you spell it ‘T-TOP‘.
That’s not a bad-looking car!!! Agree?
The huge option for 1977 was the T-Top. Frankly, I like T-Tops. I had a Camaro with a T-Top and loved it.
Engine line up was the same as the previous years with the V8 302 (in the Cobra II package) producing 139 hp.
The Cobra package also include honeycomb wheels (or I think they were referred to as ‘lacy’).
Yeah..I guess they are more ‘lacy’ than ‘honeycomb’.
Thanks for reading and check out this blog. The owner overs some of her issues when restoring a 1977 Mustang.
So we talked about the 1974 the year of big changes and small engines for the Mustang, now designated as Mustang II. The entire idea was to return to the original roots of the Mustang, small every day car. A far cry from the 300 plus horsepower for the 1969-1973 Mach 1’s. Of course it was a good idea, even though most of us don’t think so then or even now, but take a look at the numbers.The 1974 Mustang II sold over 380,000 units, and not a single V8 in the lot and that was 3 time as many Mustang as were sold in 1973. Additionally, it was Motor Trends car of the year. Now just between you and me, the Motor Trend thing doesn’t do much for me (nor does the J.D. Powers award or any of the others) but it does work for some and judging by the numbers that sold at least 380,000 others.
In 1975 things changes a bit for the Mustang. The infamous 302 returned, making a V8 an option. But how as the possible? What occurred that would bring back the a V8? As mentioned above there were Mustang sold with V8 engines…”In the US“!!!! But our friends south of the border (for those of you geographically challenged, that would be Mexico) were in fact selling Mustangs with V8. Not many knew this was going on but once Hot Rod magazine got wind of it and put it in the front of its June ’74 issue, Ford decided that it need to “pony up” (come on now..that’s clever!!!!) and add the V8 for the 1975 edition of the Mustang II.
Your 1975 Mustang Line Up
The V8 was only available with an automatic transmission and was an option for the Ghia and the Mach I (even though the standard Mach 1 engine was the V6) as well as the other models and topped with a 2 barrel carb, it produced a whopping 122 hp or 140 hp depending on you proved the numbers.
So things were looking in 1975 although the number didn’t get even close to the 1974 model.
1975 Mustang Production Data:
69F Hatchback: 30,038
69R Hatchback – Mach 1: 21,062
60F Coupe: 85,155
60H Coupe – Ghia: 51,320
Total Production: 188,575
The total range of engine looked like this:
1975 Mustang Engines
2.3 L – 140 cid, I-4, 2bbl, 88 hp
2.8 L – 171 cid, V6, 2bbl, 105 hp
5.0 L – 302 cid, V8, 2bbl, 140 hp
Code
Y
Z
F
There were two transmission available a 4 speed manual and 3 speed automatic – but the 4 speed was not available for the 302. That might seem odd but it may have to do with a fitment issue.
YOU’VE BEEN WARNED. Now you are going to have to figure out how to explain why there will be Shelby Mustang GT500 in your driveway to your significant other.
Ok car and Mustang fans you are going to like this:
BOOM!
Agent 47 Harbinger Mustang for racing or street!!!
Isn’t that wicked looking?
They tried for the look of the 69 TransAm Mustang.
Shelby 1969 TransAm Mustang
The Harbinger is built for track or high performance street duty. Here are some specs and more pics. (Check out the racing video too.)
– Limited production of 250 serialized chassis
– Harbingers can be built using a brand new Dynacorn repro body or an existing 69 or 70 Mustang shell. {but it would have to be the fastback or sports back – not my ’70 Coupe 🙁 }
Race spec, low visual obstruction design, 12 point, chassis stiffening roll-cage of DOM steel.
Race proven SLA (double A-arm) Front suspension.
Ultra stable, Bill Osborne designed, V-link rear suspension.
Speedway Engineering 9” full floating rear axle.
Penske adjustable racing shocks with optional weight jacks at all four corners.
Ducted, low drag and lift hood, engineered and crafted by Agent 47.
Come ON!!! Tell me that’s not awesome!!!
Agent 47 designed vintage Recaro style racing seats.
Agent 47 designed, lightweight, Forgeline racing wheels.
Those are nice!!!
Brakes and master cylinders by AP racing.
Check out this set up.
16 lightweight components manufactured using the latest Rapid prototyping technology.
NVH controlled interior with strategic, lightweight, sound dampening materials.
A work of art. Very limited body roll with this set up. Much improved over the original ’69 TransAm
I’m not advertising for these guys, I just really like what they’ve done. There are parts for Fox bodied and other Mustangs as well.
Here a long racing video (cameras are set up for you can see how the body reacts to cornering).
