1957 – 1958 saw the use of the New 283 engine in Chevy‘s including the Corvette.
The Corvette was fitted with the Rochester RamJet and RAM’s horn intake as the RPO Code 579D. But recently during some research I read that there was another modification.
It was called the Air Box Option, RPO 579E and it was perhaps the first production cold air induction system(at least for Chevy).
It consisted of a plenum box mounted on the fender well of the driver’s side. The box was fitted to an opening in the bulkhead next to the radiator with an air filter inside. The duck work ran to the fuelies injection unit.
Records indicate that there were only 43 produced in 1957.
Oh yes, believe it or not, the 283 put the Corvette at the cutting edge of performance in 1957, fitted with the RamJet FI (fuel injection) system (“fuelie” was the gearhead term for that). In 1958 the 283 was the base engine for the Corvette, but the 283 that use to put on 283 hp was tuned to create an even 290 hp. If that wasn’t enough for you (of course it wasn’t enough, two words that should never be heard together ‘enough’ and ‘horsepower’…unless…the word ‘not’ precedes them). The RamJet FI was an available option RPO 579D.
Additional configurations were dual four barrel carbs that produced 270 hp, they were either Rochester or Carter AFB. The cam was changed in 1958 to give 0.398 inches of lift, improvements made to get more oil to the lifters and the exhaust manifold was reworked, called the Ram Horn’s manifold. There was a change in how the 283 was mounted. Chevy used the 3 point system with a mount on each side and one at the rear of the engine at the transmission.
Intake manifold for the 283 Double Quad
Dual Quad set up on a 283
In 1961 the FI jumped the engines’ horsepower to 315. (Hey, the base corvette in 2007 was 400 hp.) The FI wasn’t the only improvement for the 283 in 1961. It was treated with a set of solid lifter, improved heads and hydraulic cam which helped the block rich 315 hp, easily. This would be as far as the 283 would go in horsepower – in production. 1961 was also the last time the dual four barrel carbs were available as an optional configuration.
By 1962 the 283 was replaces by an entirely new engine the 327 (that’s another mini series) as the premier Chevy small block. The 283 was dropped from the a power plant for the Corvette to a base engine for Chevy’s passenger and used from 1963 to 1964. Its horsepower dropped to 170 and 195 for two configurations. A small bright was a four barrel configuration for 1965-67 that produced 220 hp. (That was the configuration of my 1966 Impala convertible.)
Of note is the use of the 283 in Chevy’s light trucks with a two barrel configuration for most of the models in 1958 to 1962. It produced only 160 horsepower. For the 1963 to 1967 light truck models the hp was increased to 175.
So far my writings are about engines have been ones I owned and the 283 was the engine in my very first car. It was a 1966 Chevy Impala. It was a gift to me for my 1976 high school graduation. The car was restored by my father, who was a master auto body man. The car was a convertible with A/C and glass rear window. It sported an automatic Powerglide transmission.
The 283 was a simple engine and of course the engine bay of the ’66 Impala could hold a family of four, with lots of room to work in there. Oh…those were the days…a piece of cardboard on the ground and 3 bolts later you’d have the starter out. I wish I could find a picture, I know there were some taken, polaroids back then, but they’ve disappeared over the years, much like the car.
So what’s the history of the 283 and what was it used in. Well those answers are coming up as well as two special uses of the 283, one in the past and one modified restro-mod use…(yeah…someone mod’ed a 283..very cool, but that is later).
As with most engines the 283 wasn’t drawn up on the design boards and produced. It was a result of Chevrolet’s desire to increase performance of a power plant they already had on the shelf. The 265 cubic inch small block underwent transformation that resulted in a new engine in 1957.
The modifications made to the 265 to create the 283 were increased bore from 3.75” to 3.875″, the main bearing was given 2.30” journals and 2.00” connecting rods. The base configuration (with a two barrel carb) for the 265 produced 165 hp, the 283 made 185. Twenty more horsepower doesn’t seem much but toss on a 4 barrel and the 283 takes off at 220 hp which tops the 265 similarly configuration producing 185-195 hp.
Chevy's 283
1957 was a good year for Chevy. Bill “Grumpy Jenkings took a 283 fitted with a dual carb set up and achieved 270 hp. It was also the first year for Chevy’s Rochester Ram Jet and what better engine to use than the new 283. This combination took the 283 in to the history books by producing horsepower that equaled the displacement – 283 c.i.d. and 283 hp.
And that is what led to the installation of the 283 in Chevy sports car platform, the Corvette.
