A few big ones this week.
11/15/1977 – Ford sell its 100 millionth CAR. What was the car? A Mustang? One of the legendary F150s? Nope it was a 1978 Ford Fairmont Futura (the triple F).
Ford Fairmont Futura (The Triple F) Although some owners had an additional F to add.
The guy that started Honda Soichiro Honda was born 11/17/1906 in Japan.
11/18/1940 Buick produced it 4 millionth car.
http://ucapusa.com/heritage_buick.htm
1940 Buick Super Coupe
One day and 19 years later (11/19/1959) Ford stopped the production of the ugliest cars you’d love to own the “Edsel”.
In two months I will have been writing this blog for 1 year and I have enjoy every minute of it.
When you blog like I do, to share a specific area of interest, you are always trying to increase readership. Now if this were a commercial enterprise for me, then increasing my readership would be Job One. (Come on, which car company’s slogan was that? If Ford jumped into your head that would be correct.) However, it is not, but still I’m always searching for a way to make this blog a place more and more folks want to view.
There are a lots of ways to do that, none of them huge as far as bringing in the masses and some aren’t inexpensive and others are labor intensive. (Guess which one I do…oh…yeah…cheap and labor intensive…Average Guy….say it!!!!……Average Budget!!) While searching for ideas or processes I could take advantage of, I ran across some helpful hints. One in particular makes sense, namely, keeping the site updated regularly. This suggestion dictated that it be daily, which is really a good idea. However, the method it promoted was to jam the blog with other folks news feeds, articles and automatic updates from outside sources.
I thought about this a bit and I tooled around the web and looked at commercial blogs and forums and I realized that everyone had read this particular tip and employed it. And I thought, I just don’t see the point. The blog is no longer the owners writings, but really just a reorganization of things floating around on the web. Nope, not for me.
I still think keeping up the daily effort is the right way to go, but I can’t do it in that manner.
Although I do pop on videos that I think are cool and maybe a link to a forum or another blog, I’m going to keep the core of this blog full of original material, meaning my own scribblings and occasionally notes from the readership.
The life’s blood of a blog run like I run this one, are comments and readers. So drop me a note, ask a question, or give me a suggestion ( I do requests).
10/4/1983 A new land speed record is set by Thrust2 a British jet propelled car. It was driving by Richard Noble and reached a top speed of 650.88 but the actual record was 633.468 base on the average of two runs within one hour.
Thrust 2 - but ya know..it's a rocket..not a car
10/6/1955 – Ford takes is Lincoln Continental to the Paris Car Show
1955 Continental
and on the same day ll years later (1966 — so you don’t have to do the math) Cadillac give the world a peak at the Eldorado.
1966 Eldorado - Here's a Pink one.
10/8/1959 – Ford introduces the Falcon and thus started a racing legacy. These cars were light and are still round as they make great drag racers.
1969 Ford Falcon - notice on much the tail lights look like a Maverick's
10/8 – Two birthdays on this date
1890 Edward Rickenbacker – World I U.S. Fighter ACE, created the Rickenbacker Motor Company which only lasted 7 year before bankrupting him – make the first cars with 4 wheels braking system. Owned the Indianapolis Speedway between the Wars.
1922 Rickenbacker Touring Car
1869 Frank Duryea – Created Duryea Motor Wagon Company – first gasoline powered car.
Duryea
Thanks for reading. Coming up more wrenching tips and the first installment of the next engine series featuring Chevy’s 283 power plant.
9/26/1967 Everyone loves this car AMC’s Javelin the car was in the public’s hands by 1968. I loved the body style.
1968 Javelin
10/1/1908 – Mr. Ford began selling is Model T
Model T Ford – Rag Top
(they were all convertibles!!!…just saying!!!)
Oh.. you’ll like this one.
10/2/1959 – Chevy introduces the Corvair. Believe it or not I’ve seen some of the sale footage and they treated it like a jeep. Chevy had drivers drive up embankment, up and down streams with water over the tires. This gave Ford a scare but it wasn’t until they could put together the Mustang did they really have an answer.
If you are work on your older cars engine, there are a good many tricks that you can use save a couple bucks and gain a little horsepower.
This one is an oldie but a good.
Have your intake valves back cut, you’ll get a similar boost as if you use high lift rocker arms or cam.
The procedure is best done by a qualified machinist. So while you have your engine apart and laying all around our garage on pieces of cardboard (come…you know that’s what happens!!!) have him take a little off the port side of your intake valves. This creates the same effect as an earlier opening a later closing action like just a like a the addition of a an upgrade cam. The lighter valve means less spring pressure is required to control the valve at higher rmps.
A 30 degree cut is what they do on vortex engines.
The backcut is at the edge of the normal valve cut.
People love their cars. Some people love only a specific make or model. I case you haven’t noticed I have a thing for Corvettes and thing for Mustangs (yup Ford and Chevy). I enjoyed this comment from a guy who left it on my Facebook
Andy from my Facebook wrote this:
Part of the reasons why I Love Corvettes, the heritage, history and traditions. To some it’ ll be just be a car, to others it’ s part of their lives. A true Corvette owner/enthusiast will appreciate all aspects of the Corvette, from whateve…r generation. They may have a least favorite but none should be hated or looked down on, because without the last there would be no present. I Love the great community behind this Car, it makes owning one so much better. Owners all across the world willing to give others a helping hand, worldwide Corvette events are held, some over 500 owners attending, a lot for good causes. To me, that’ s something very special because this doesn’t just represent a “Car”. It represents a special select group of individuals willing to enhance the past traditions, that is Loyalty!!. I plan to hold onto it for as long as I live. Something this special is hard to come by and shouldn’t be let go. Just felt like sharing this thought!! Have a great Sunday.See More
Brent worte: Beautiful and well written Andy!
Tim Sweet – As a previous owner of a C4 and the new owner of a C6. You are right on Andy. Save the Wave!!!!
Sorry MOPAR fans, I got sidetracked. Let’s continue with the Dodge’s use of the 318.
Dodge didn’t get a V8 until 1953. That first engine was a Hemi with 241.3 cid and only 7.1:1 compression. They called it the 241. It was improved upon for the next couple of years and very cool names like, Red Ram and Super Red Ram.
Approximately 1956, Dodge began using the 315 with the Polyspheric chamber. (Here is the link from my earlier post on the Polysheric head: http://wp.me/pKHNM-gy)
It wasn’t until 1960 that Dodge began using the 318. This was, again, the Polyspheric chamber, and it came in two versions in 1960, a 2 barrel and a 4 barrel, with 230 hp and 255 hp respectively (of course) and both a 9.0:1 compression (that pretty good compression rate). The 318 was used in the Dart Seneca, the Pioneer and the Dodge Phoenix got the larger of the two 318s.
The 318 carried on through out the ’60s with the horsepower hovering between 230 and 260. Of note during that time was where the 318 was used. I was surprised to find, such as, in 1968 the Dodge 440 Coupe used the 318 (not the 440, which even non-MOPAR peeps know about that one).
The most cars sold by Dodge was the Dart throughout the 1960’s. There were actually 3 sub-models of the Dart, the Sencea which had 3 different trim levels, the Pioneer which had 5 different trim levels and the Phoenix which was the most upscale sub-model with 4 trim levels. The engine options were either the 225 slant six or the 318.
Here are a few pics:
1960 Dodge Dart Phoenix
1960 Dodge Dart Pioneer
1960 Dodge Dart Seneca (I love the fins!!!)
At the beginning of this series I mentioned that I had 1970 Dodge Dart and that it did have the 318 with a manual transmission. There was only one version of the 318 for 1970 and it was has 230 hp and 9.0:1 compression with a bore and stroke of 3.91X3.31 in. That made for a pretty quick car, as light as it was.
Well, I bet you can guess what comes next. Yes a sharp decrease horsepower. By 1972 the 318 was reduced to 150 hp and by 1975 the drop was to 145. 1976 was the last we saw of the 318 used by Dodge. The 1976 Dodge Dart was the last year for the Dart, but it went out in a big way being offered with a Police Package Code A38. One of the options in this package was the 318 and it regained some of its muscle to the tune of 220 hp.
This concludes the series on the MOPAR 318. If you’d like to offer up an engine to see more information on drop me a comment here or email me at timsweet@cox.net.
