3/1/1988 Pontiac announces the end of the Fiero automobile – Was anyone sad about that?
Pontiac Fiero
3/1/1937 In New Jersey one of the largest dealerships of the era was opened. The Miro Brothers opened a state-of-the-art facility with “one of the largest and most modern showrooms in the country,” measuring 38′ x 40′ . The dealership was service station and dealt for Buick, Packard, Oldsmoble, and REO trucks. The east side of the building served as a Mobil gas station and service garage during the World War II.
As I get ready to start the new round of mods for my 1970 Mustang Coupe, I’m reminded of a couple of issues that came up when I was assisting a fellow Mustang owner doing a trans – transplant.
The first tip is partially dependent on what stage you are in of your restoration.
He has already finished most of the interior when the a transmission he wanted to add became affordable, it was a good deal…saving some $$$$.
He had decided to do the swap and add a short shifter. This of course requires the removal the bezel and the current 3 speed shift lever, which is easily done from inside the car.
Bezel and Boot
In the course of removing those two parts, he found that the opening cut in the new carpet was not going to allow the access necessary. An attempt to ‘widen’ it was successful but left a bit of a jagged slit. Additionally, while removing one of the screws it snagged the carpet and pulled a few loops out. Can you guess what the tip is? Yeah…remove the carpet and if possible make the swap before you put new carpet in.
One other quick tip is to apply a little silicone spray to the shifter to help slide the boot off..oh…yeah…removing the shift knob before the boot is a good idea…..DON”T ASK!!!!!
I love attending car shows. Either as just a spectator or participant, I have capital F, capital U, capital N.
Today (2/20/2011) I attend for the 3rd year Tucson’s Fords on 4th Ave. A very good size show for the area, considering it was limited to Fords. This year I was only a spectator the Mustang wasn’t ready for a show (needed a bunch of detailing).
There were a ton of newer Mustangs, nice machines, shinny inter-cooled turbos and all the tubing, all nice machines, no doubt. But there was a huge void of older Fords. I love seeing the 40’s and 50’s Fords and Mercurys.
The stars for me of this show were the Fairlanes and Galaxies. Yes there were 60 Mustangs, Shelby’s, Mach I’s and GT. But the lines of these longer 60’s cars are just some of the best designed, ever.
From square boxes to sloping roof lines to coke bottle shapes, car lines have evolved. Sometimes they just went way wrong.
I’ve had my fair share of cars and their shapes and lines were polar opposites. My 1966 Imapla (my first car) was long and sleek, my next car was a Dodge Dart boxy but with a good roof line. Oh but it got worse, my first nearly new car was ….wait for it…..a Ford Granada. Yes…boxy…maybe a little roof line, but it got me around.
After that a series of car including a ’70 Chevelle (you know those great lines), a European Ford Escort (while stationed overseas) and a 83 Camaro (that had great lines on that one). I owned one more Granada and a VW Rabbit (diesel) and two Toyota Celicas ( like the lies of those), a couple pickups and my two Vettes and my Mustang. They spanned decades and many different design lines.
Some of the worse, in my opinion, were some of the best-selling and some that go for huge money now that they are classic muscle cars.
The absolute worse were the pumpkin or watermelon seed cars (that’s my coinage).
Here’s an example: 1996 Chevy Impala
A far cry from my 1966 Impala’s lines
1966 Chevy Impala
Now, I was looking at the lines of my ’70 Mustang and I’d have to say compared to the ’70 Dodge Super Bee the lines (and include the graphics, moldings and even panel seams) the Mustangs lines are much cleaner.
Here is an outlined image of the Dodge:
Dodge
I tried to be fair with my hand drawn lines. The flow of the graphic and their awkward end as they go to the relatively square door make it almost look like the designers said..”OH Crap!!! We forgot the door!!” The fenders have nice lines, as do the quarter panels, but in total it isn’t smooth. HOLD ON, before any of you Mopar folks get all worked up, I’d own a Dodge Super Bee, in a heart beat, especially if someone parked it out side my house and tossed me the keys…and I drive that 383 like I stole it!!!
Now look at the lines of my ’70 Mustang…(are you sick of seeing it yet?)
70 Mustang lines
Just the forward edge (hinged) of the door being shaped it a big plus in my opinion. The sloping of the roof-line into the trunk is another smooth difference, and keep in mind this is just the coupe, not the fast back for the sports back, relatively speaking my Mustang is rather square compared to it siblings, the Mach I and Boss models. Compare the side window openings. The Dodge is very angular, the Mustang’s has a smoother flow.
I could go on and on, we could talk about the 70’s Volares or the even move into the 80’s and talk about the Ford Fairmonts or Chryslers K-Car (I can hear Bill now!!!) but let me hear from you. What do you have to say about car lines, past or present?
Tokyo 17 Car Design Forum opens for registration. Our Tokyo 2017 Car Design Forum has launched, and the website is open for registrations now. More News …
Hyundai-Kia design chief outlines car design philosophy – Interview. by: Roger Stansfield. Materials at the heart of the Paris Motor Show. 20 Oct 2016 …
This is the part of the engine series where I list the uses for the power plant. The 283, as I mentioned, carried Chevy engines to the next level, by being the first engine that car manufacturers were able to coax out the same horsepower as the displacement.
From 1957 (its inception) to 1959 the 283 was the base model V8 for nearly all Chevys, coming in a 2 and 4 barrel versions with the 4 barrel being the main power plant for the Corvette. In 1958 the 4 barrel version was dubbed the Super Turbo Fire with 220-230 hp with 9.5:1 heads. (Toss that name in with other versions like the 348 Turbo Thrust and the Super Turbo Thrust which sported 3 two barrel carbs.) The other premier engine during that period was of course the FI used in the Corvette with 9.5:1 and 10.0:1 compression.
The 283 Super Turbo Fire
1960-1961 saw the base 283 drop to a 2 barrel and muster just 185 hp. The bright spots were engines used only in the Corvette, the dual quad and the FI engines. 1961 also saw the 283 go MARINE – nope not joining that elite military branch but rather Chris-Craft the boat builder, sealed it tight and give a duty on their Cavalier Cruiser vessel.
Marine 283 for Chris Craft Cavalier Cruiser
Not much changed in 1962-1963, at least nothing very exciting. Chevy dropped the dual quad as an option (although I bet you could still get it done) and the 283 dropped in hp to 170 and as was no longer an option for the Corvette, but was added to the Impala.
As perhaps a last chance to breathe some life into 283 Chevy gave it a bump in hp to 195 and it found a new home in the new Chevy II in 1964 and 1965 a 4V was added give the iron 220 hp and another new home the ’65 Chevelle.
But that couldn’t save the 283, it was time for Chevy to move on and 1966 was its final year. It served as the base V8 that year as an option for the Chevy II and Chevelle and the other Chevy sedan’s, like my 1966 Impala.
Although it seems like I give this a quick pass (not a long list of models) the 283 served nearly all models of Chevy from 1957 to 1966, listing them all would be, well ..repetitive . Interesting enough it never crossed over to the other GM brands. But it did make it into the Canada made Studebaker cars in 1965 and 1966.
During the it’s life span the 283 was offered with every transmission available for that year. From the torque glide to the power glide automatic transmissions and even a few 3 and 4 speed manuals. Additionally, I was surprised to find that it was offered with air suspension with some automatic.
Did the 283 really die? Nope it received the cam from the 327 and became Chevy’s 307!!
Notable:
– The 327 followed the 283 and although it was an entirely hunk of iron, to keep cost down Chevy used some 283 components initially.
– GM’s RPO 579E option on the 283. 579E was called the Air Box. It was perhaps the first production cold air induction system(at least for Chevy). It consisted of a plenum box mounted on the fender well of the driver’s side. The box was fitted to an opening in the bulkhead next to the radiator with an air filter inside. The duck work ran to the fuelies injection unit. Records indicate that there were only 43 produced in 1957.
1957 Corvette AirBox
– Corvette Fuelies had a reputation for hard starts and finicky operation and many were replaced with the standard carburetor (1957)…Flash Forward the 1984 Corvette Crossfire (fuel injected) (Of which I was a previous owner) suffered from finicky operating and some were replaced with carburetor set ups.
I hope you enjoyed this little bit of engine history and as always, thanks for reading.
The correct should be – the 283 received the “crank” from the 327 (not the cam) and became the 307.
1957 – 1958 saw the use of the New 283 engine in Chevy‘s including the Corvette.
The Corvette was fitted with the Rochester RamJet and RAM’s horn intake as the RPO Code 579D. But recently during some research I read that there was another modification.
It was called the Air Box Option, RPO 579E and it was perhaps the first production cold air induction system(at least for Chevy).
It consisted of a plenum box mounted on the fender well of the driver’s side. The box was fitted to an opening in the bulkhead next to the radiator with an air filter inside. The duck work ran to the fuelies injection unit.
Records indicate that there were only 43 produced in 1957.
