Feb 2, 2017 … I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to …
Welcome back to the #ProjectBeepBeep. We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner. Did I say this …
Welcome back to the #ProjectBeepBeep. We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner.
Did I say this is the final chapter? Well….
Sometimes during a project you just can’t afford the time to do a video, especially when you have a friend coming by to help out. Lets have Bill tell you how it all ended:
“I had to call in an expert; fellow I work with is a Mechanical Engineer and used to work as a Porsche/BMW mechanic before and during college. Together we got the wheels on the ground in about two hours. He recommended a last-ditch effort with the brake lines; we tightened all lines until the tube nuts were deformed. Also found an off center flare on one of the brake lines and he had a machine that fabricated the new line. Difficult to bleed; we bled the system 11 times (I counted) and went through lots of brake fluid (almost two quarts).
Took BeepBeep to the MOPAR show at Larry Miller Dodge almost immediately after getting the wheels on the ground! Car stops on a dime and gives you nine cents change. Don’t miss power assist at all. This car will STOP!
Check it out:
I need an alignment next, but otherwise I really have no other problems to report. Everything working; oil PSI is 35 at idle, 55 at running down the road, and temp was a tick under 195F all day long.
Time to enjoy this ride!”
Bill, thanks for the all the video and the tips you given the reader!
Looking forward to your next ‘little’ project on BeepBeep.
I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car: Back in the day. It was a long search with lots of phone calls with many …
1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep. Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision. You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …
Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents. Nice shiny new rotors!! Spindle …
Ready for some more #ProjectBeepBeep? Bill takes you through a few tips for restoring your B-Body door panels. Take a look: Great stuff!!! Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim Introducing …
Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note: I forgot to add the credits for these videos: Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …
Welcome back to #ProjectBeepBeep. Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates, Bill mentioned that he had sent out the circuit board for a restored. Here is an update on the status of the dash. Next up an …
Bill is trying to finish up this the disc brake conversion and as things happen when you are dealing with our mechanical best friends, when you think its ready to go, things go south.
Look for the discussion on Dot 3 and Dot 5 brake fluid and tips for creating your own brake bleeding system. And keep an eye out for DIY master cylinder bench bleeding tubes.
All excellent to note!! Oh…and dig out that jack!!!
Lots more coming up on Project BeepBeep, so check back often.
1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep. Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision. You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …
Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents. Nice shiny new rotors!! Spindle …
Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note: I forgot to add the credits for these videos: Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …
I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car: Back in the day. It was a long search with lots of phone calls with many …
Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents. Nice shiny new rotors!! Spindle …
Ready for some more #ProjectBeepBeep? Bill takes you through a few tips for restoring your B-Body door panels. Take a look: Great stuff!!! Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim Introducing …
Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note: I forgot to add the credits for these videos: Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …
Light week this week but here are your #AutoFactoids for the week of May 21, 2017.
May 22, 1929 – Goodyear Blimp took its maiden flight. Still provides some of the best auto racing coverage!!!
Goodyear Blimp.
First Goodyear Factory
Mr. Goodyear
May 23, 1875 – Alfred P. Sloan Jr. was born in New Heaven Conn. He headed up GM as President and guided it through some iconic car designs. He was instrumental in establishing the idea of make styling changes annually and planting the idea of (something we consumer dislike) planned obsolescence. He also established a pricing structure by sub-brand (Chevy, Pontiac, Oldsmobile, Buick, Caddy) —referred to as the ladder of success, so that they did not compete with each other, and buyers could be kept in the GM “family” as their buying power and preferences changed as they aged.
Alfred P. Sloan – Time Magazine Dec 1926.
Alfred P. Sloan
May 26, 1906 – Mauri Rose born in Columbus, Ohio. This Racing Hall of Famer driver, placed second in the 1927 Indy 500. Actually won the Indy in 1941, but that was a tough victory, spanning two Maserati-powered Elgin Piston Pin Specials cars, after the first one had mechanical issues. He tossed a fit and the car owners pulled one of the other drivers from the race and give Rose that car.
The Pin
The Elgin Pin
What powered that thing? The Elgin’s “Power Plant”
Hope you all had a great Turkey Day!! Here is the line up of Auto Factoids for the first week in December!!! Nov 30 1960 De Soto ceases production. The last De Soto produced were really the Chrysler Windsor, most did not sale, even though dealerships continued to received cars after the …
Here are your Auto Factoids #AutoFactoids for the beginning of June, 2015. May 31, 1927 – Ford produced the last Model T. There is some debate as to actual date and it’s said that the 15th million Model T rolled off the production line on May 26th, 1927 and the Henry …
Kaiser-Fraser formed July 26, 1945 – The Kaiser-Frazer Corporation was the result of a partnership between automobile executive Joseph W. Frazer and business man Henry J. Kaiser. In 1947, the company acquired the automotive assets of Graham-Paige. Interesting enough, Kaiser had no automotive business experience. In 1953 the company became …
Here is your #AutoFactoids and Car News Now for this first full week of September 2015. Auto Factoids Sept. 7, 1954 – Production of Ford Thunderbird begins 1955 T-Bird 2002 Thunderbird Sept. 8, 1903 Preston Tucker was born in Capac, MI. While dubbed “Tucker Torpedo” during production no ‘Torpedoes’ were produced. Beautiful …
Here is your #AutoFactoids and Car News Now for this first full week of September 2015. Auto Factoids Sept. 7, 1954 – Production of Ford Thunderbird begins 1955 T-Bird 2002 Thunderbird Sept. 8, 1903 Preston Tucker was born in Capac, MI. While dubbed “Tucker Torpedo” during production no ‘Torpedoes’ were produced. Beautiful …
Bill is getting soooooooooo close to having ProjectBeepBeep on the road again. This update takes a look at the brake actuator rod.
The Rod
Bill mentioned 303 Protectant and here is a bit of information from the web site:
Originally engineered for aerospace and aviation applications, 303 Protectant provides superior protection against harmful UV rays that can cause discoloration, fading and cracking of vinyl, rubber and plastic surfaces. 303 Protectant also helps repel dust, dirt, lint and staining. Safe and effective for vinyl, gel-coat, fiberglass, carbon fiber, synthetic or natural rubber, plastics and finished leather.
303 UV Protectant Wipes for Vinyl, Rubber, Plastic, Tires and Leather, Pack of 40:
303 Automotive UV Protectant brightens surfaces and keeps your car looking newer, longer
This formula provides superior UV protection for any rubber, plastic, vinyl, eisenglass, PVC, gel coat and fiberglass surfaces of your vehicle, such as your dashboard, windshield wiper blades, and even your tires; not for use on unfinished leathers (such as suede), fabrics (canvas) or floorings
303 UV Protectant not only protects against fading, discoloration and cracking from harmful UV rays, but repels dust and stains too helping to extend your vehicle cleaning
Rinse-free formula leaves a non-greasy, dry matte finish with no odor and is non toxic and water based; 100 percent free of grease-producing silicone oils and petroleum distillates
303 Automotive UV Protectant is an easy to use spray on formula that comes in a 16 fl oz bottle with trigger sprayer
We guarantee our products
Warnings:
California Proposition 65 Warning: This product contains a chemical(s) known to the state of California to cause cancer.
More coming up shortly on the brake lines installation.
Welcome back to #ProjectBeepBeep. Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner.
If you recall mixed in with some brake updates, Bill mentioned that he had sent out the circuit board for a restored. Here is an update on the status of the dash.
Next up an update on the disc brake conversion – almost done!!!
I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car: Back in the day. It was a long search with lots of phone calls with many …
Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note: I forgot to add the credits for these videos: Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …
Auto Factoids (#AutoFactoids) for Week of April 30th 2017
May 1, 1954 – American Motors Corp Formed
Formed from Nash-Kelvinator and Hudson merger. It was still referred to as Nash-Ramber and then AMC Ramber though the 1950’s. Styling didn’t change in the next few years and 1955-1956 Ramblers were badged as both Nashes and Hudsons, with no visible difference between the two. Rambler became a marque in its own right for the 1957 model year. The Nash and Hudson makes were continued as senior model only through 1957, after which all of AMC’s offerings were marketed as Ramblers.
1958 4 Door Rambler Ad
1958 Rambler Statesman – 2Dr.
May 2, 1918 – Chevrolet becomes part of GM.
GM was started Billy Durant by using the financing from his Durant-Dort Carriage Company to take over Buick Motor Company. He changed the name to General Motors (with Buick eventually becoming a separate brand later on). He soon brought in Oldsmobile, Cadillac and Oakland company. He started Chevrolet (in partnership with famous Swiss race car driver Louis Chevrolet) to help off set the financial issues as a separate company. Durant eventually started purchasing more Chevy stock and eventually took control and folded Chevy into GM.
May 3, 1948 – Willys Jeepster Phaeton debuts.
These were mostly powered by the Inline 4 Cylinder, L-head engine. (134.2 cid, bore 3.13, stroke 4.38, compression 6.48:1 for about 63hp). Power got to the wheels via a 3 speed transmission. All the Willys had the same wheelbase length of 104″ with the total length of the Phaeton being 174.8″. Production was not well-defined through out all the models offered but approximately, 10,326 Phaeton were build.
1948 Jeepster Phaeton
May 3, 1949 – Packard’s 50th Anniversary 2000 Gold Packards.
These were Dealer Driveway. These weren’t “gold” cars but they were painted in a special paint code of Gold. Each were powered with 327 c.i.d., 150 hp engine. The number of ’49 2000 Gold Packards produced was about 600 (some say 1500) . The event was held at was the Utica Proving Grounds. Currently none are known to exists although you can see a few “gold painted” 49 Packards pop up from time to time.
Here is a 49 Packard – painted gold. Is it one of the Drive-Aways? Slight chance.
Packard’s Utica Proving Grounds.
May 4, 1923 First Le Mans 24 hour race.
The first Le Mans 24 Hour race was held just outside Le Mans, France. Initial the race was limited to ‘production’ cars and two drivers, now they require 3 drivers per car and the of course these cars aren’t in your dealers show rooms. The race was won by one of the French teams – André Lagache and Léonard driving a Chenard et Walcker with 3.0L I4 engine.
This is an awesome looking car!!!
May 6, 1928 Chrysler debuts the De Soto. The De Soto wasn’t available to the public until 1929. It sported an L-head six cylinder engine, displacing 174.9 CID and producing about 55hp.
Here are your Auto Factoids #AutoFactoids for the beginning of June, 2015. May 31, 1927 – Ford produced the last Model T. There is some debate as to actual …
(via Auto Factoids for the Week of April 23, 2017 Mazda, Ford, Lamborghini). Tagged: autofactoids. Source: average-guys-car-restoration-mods-racing.com.
AutoFactoids | Auto Factoids for the Week of April 23, 2017 April 25, 1970 – First Mazda in the US I remember seeing the first Mazda cars in the U.S. I was 12 or …
Feb 25, 2015 … Got a few huge debuts this week’s Auto Factoids (#AutoFactoids), so lets get started. Feb 23, 1954 – Ford shows off the Thunderbird for the first.
Bill is working on finishing up the brake conversion. Here is a progress update.
Note: I forgot to add the credits for these videos: Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim Sweet AG Car Restoration – www.AGCarRestoration.com
Here’s a look at the proportioning valve.
Proportioning Valve
Proportioning Valve
Comparing the bends in the new brake lines from the master cylinder against the old.
Missing brake lines are in and some dash work.
Note: I forgot to add the credits for these videos: Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim Sweet AG Car Restoration – www.AGCarRestoration.com
Lots of good information here, especially when it comes to ordering parts online. Make sure you know who you are ordering from, return policy and as Bill mentioned any tech help you might need is available (free is always good, too).
More coming up on #ProjectBeepBeep, #ProjectSportsRoof and more.
I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car: Back in the day. It was a long search with lots of phone calls with many …
1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep. Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision. You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …
Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents. Nice shiny new rotors!! Spindle …
Ready for some more #ProjectBeepBeep? Bill takes you through a few tips for restoring your B-Body door panels. Take a look: Great stuff!!! Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim Introducing …
Bill takes a look at the heavy-duty brakes that came on the ’68 Road Runner. Bill doesn’t like the stopping power that these give him and even though they are in good shape, he may still upgrade them. Here are a couple close-ups of those heavy-duty brakes: That’s some great information on brake …
Bill continues with his march toward a complete brake system replacement for #ProjectBeepBeep his 68 Plymouth Road Runner. Here is the Bill’s update. There is more coming on the #ProjectBeepBeep and #ProjectSportRoof. Keep an eye out for dates for the new Average Guys’ Car Restoration Live Event on Face Book AG Car Restoration …