One of my readers sent me the video below. It’s the second in a series of 3 of a California K-Car club, headed out for car-a-van. Now generally the Chrysler K-Car was and is a but of many jokes. It wasn’t their best plan but these cars have a following.
I’ve gone on similar runs with my Vette and Mustang, same amount of planning, etc, ( we just get there a ‘bit’ faster – :^P). This video show that it’s true…It doesn’t matter what you drive…if you love it. 425px;margin:0 auto;”> [vodpod id=Video.15330551&w=425&h=350&fv=%26rel%3D0%26border%3D0%26]
Folks seem to like this segment so let’s continue with 1950.
19 major car makers existed back then and Chevy topped the production totals with 1,498,590 units followed closely by Ford with 1, 208,912. The rest of the field were all less than have that.
From Michael Woodword – hey, I just got a 1993 thunderbird with a 5.0 HO. every time I come to a stop, the oil pressure drops dramatically. I was wanting to know if you would have any idea what could cause this. Thank You
But when I get back up to speed its fine.
It would be nice to get an opinion from an expert which ar
nt easy to find
ANSWER: Michael. The pressure should drop when you stop, dramatic swings in the gauge could be a problem with the gauge or you need replace your oil sending unit.
I recent attended a showing of the latest Transformers movie (“Dark Side of the Moon“) and if you know anything about this series or of the cartoon of years gone by, you’ll know that the main characters are machines that turn in to robots. Most of these are vehicles, cars, trucks, semis and even military aircraft.
The car group included a lot of chevys this time, a Camaro which is one of the main stairs, an Impala and a Corvette (actually a representation of a prototype Corvette). The Corvette transformed into a rollerblading robot – which I thought unfitting of my favorite car.
There is the human hero and of course a hot model as his object of desire.
When the hot model was threatened or in harm’s way you could hear the audience get involved. But when an evil robot was about to execute the Camaro character the audience got really vocal. Kids cried at that images, thinking that the Camaro was about to get wacked, forget about the girl….just don’t hurt the car!!!
Yes we love your cars. Oh and the good cars – the Chevy‘s– saved the world again.
But that’s movies and you can just enjoy it with no lasting harmful effects..unless you are me or maybe it wasn’t me but the subliminal messages. I left wanting a Camaro, but not just any 2012 Camaro, but a yellow with black striped bumble bee Camaro.
It must be subliminal messages, I had the same desire after watching Will Smith zip through the empty streets of New York City in the 2007 Shelby GT500 Mustang in his move ‘I Am Legend’ yes the red with white stripes.
Before I attempted to use the tire dressing, I washed the car and gave the rubber a good scrubbing. For the actual application I used an old sock. When I first poured the dressing on to the sock, it was a bit runny, but still has some consistency. Keep in mind the temperature, 105 degrees in my garage where I stored it and where I was applying it and about 108 outside. I was a bit concerned, because with two show cars (one, a trophy winner and white!!) and having the tire dressing flung all over the paint isn’t cool, which is exactly what I won’t use the Eagle One brand.
I gave 3 of my 07 Vette’s tires two coats and I have one 3 coats. Take a look a the results.
First coat:
First coat - not even - most likely due to the sock.
Another first coat
An additional note – these pics were taken in my garage with a less than optimal source light.
Now with the Vette moved out into the sun and two coats.
Two coats - pretty nice coverage.
I really liked the 3rd application.
3 coats created a good look
So know I’ve given each tire 3 coats and since I don’t do this for a living, the next test had to wait. I had a few ‘honey-do’ chores, before I took the Vette for a drive. So the car sat in the sun for about an hour – temp was about 108.
With the to do list completed, I needed to take the Vette out to toss some air in the tires. Yes…average guy tools = small compressor that doesn’t hold enough air to top off four tires..heck…it can barely do one…got to upgrade one of these days.
Here is where the rubber meets the road and hopefully the tire dressing doesn’t meet the paint, but first a note. I did in fact drip some of Griot’s Garage – Long Lasting Tire Dressing on my chrome wheels and sure enough it cleans off with moist rag.
Take a quick spin about 1.5 miles from the house and I don’t drive 30 miles an hour…the tires spun pretty hard the entire trip.
I’ll mention, again the temperature and I think that might have something to do with it, but really this wasn’t bad. The real test was whether or not it spread to the paint and since it’s a black car you aren’t going to see it as easily – it’s a clear liquid as well. So a quick swipe with a white showed me all I needed to know, it came back clean.
So I’m pretty pleased with how the product worked.
As far as the “long-lasting” part. I’m not going to be able to render a fair opinion yet for a couple of reason:
1. I just put it on
2. We don’t get much rain here in Southern AZ but it is the monsoon season so it has rained 3 times since the application.
So that will have to be in Part 3 later on.
I need to add a few notes as I always do when I review a product. (Some of that laws school was worth the $$$.)
I don’t work for Griot’s, my only connection is that I”m on their mailing list. This is the first product I’ve purchased from them.
I did see a tweet from someone related to Griot’s Garage commenting on this review, but don’t know the individual.
I’m not Consumer Reports or Consumer Digest. I only comment on products I use in my search for “stuff” that works well for me.
Whenever I write about a product I try to follow the instructions provided and always give any variances or events/conditions that might impact the outcome.
OK after all these years, after the car was gone. I stopped by the house. I was met by Al, short for Albert, not Alan, as Al informed me.
I told him that I had always wanted to check on the Grande and he informed I was a bit late. He said he didn’t mind answers a few questions.
So I asked Al how got the car and he said he bought it back in 1972 from some guy. “It was a nice car with an automatic.” Of course my next question was what was under the hood and he said ‘nothing’. “Took it out about 10 years ago and parked on the side of the house.” He told me he never got the engine fixed, ” ’cause it ‘cost too much.” He ended up letting the guy that did some work on it keep. “Ya know, it might have been a 302.” He said he didn’t really know want to do with the body and just ended up hanging on to it.
So I asked him where the car end up, hoping it was sent out to be restored. He said there was this guy from Texas that would stop by every now and then and ask if it was for sale. He drives large pick up and always has an empty trailer attached. This same guy that has stopped by a co-worker of mine, who has her son’s 70 Monte Carlo and her daughter’s 1969 Camaro sitting under her car port – waiting for some TLC and try’s to convince her that she should sell them to him. She chases him off each time, but he’ll swing by a few months later.
A couple of weeks ago, Texas dude, stops by Al’s home and Al decided to get the Grande out of the yard and sold the man from Texas.
We talked a bit longer about my 1970 Mustang coupe and I showed him a couple of pics on my phone and then thanked him for his time.
For the Mustang the studs pass through the track and the nuts are under the car so a little space is need. Since most average guy’s don’t have a lift in their home garage, so I pull out the trusty 2 ton floor jack and a jack stand.
As most Mustang owners know, they were built with subframes. When jacking up the car with a floor jack place it on the frame, or use the standard scissor jack that attached to the seam at the rocker panel. Either way once it’s in the air, DO NOT FORGET to put the jack stand under the car. Yes it actually takes longer to do the set up then to remove the bolts…but take the time to be save.
2 Ton Floor Jack
Floor pan plug that protect the bolts and studs.
These plugs pry out very easily. I was able to get them out with just my fingers. Once they are removed you’ll have access to the nut. The distance between the opening and the nut requires an extension and the length of the stud requires a deep socket. These were 1/2″. The Mustang was raised in Arizona (get it? First reader to drop a comment explaining “get it” wins a DVD.) and all the plugs are in place. This kept all the road grime and what not off the studs and nuts, they separated easily.
When you are done you should have this many parts.
When I purchased the Mustang I was told that the upholstery was replaced at some point. (Keep that in mind for later as well.)
As you can see in the video I wasn’t able to get the seat out of the car. I initially I figured it was because I couldn’t pull out level enough for the studs to clear the holes due to the fact that I was holding the camera. However, after putting it down I still shouldn’t get the seat out. So I climbed back under the car and found that there was a second nut on the right rear stud. I’m guess it was doubled up, when the last installer wasn’t sure whether they already but one on? And of course you can see by the previous picture that those two nuts not the same as the others.
Part III will be coming up in a day or so.
Thanks for reading.
Tim
I know, I have a lot of work scheduled for the Mustang. This includes interior work and yes maybe doing it all at once would be a good idea. But I drive it a couple of times a week and the seat is getting worse. So I decided it needed to be fixed.
The kit is from TMI and I think I purchased it from a Mustang parts dealer, but I don’t recall which one. Here’s a couple of videos on it.
What I noticed is the black piping. I know that the car was re-upholstered before I purchased it, so I’m guessing that this was not original, at least they don’t make them in the reproduction world.
So you are out at the mall or grabbing some groceries at the store and you are headed back to your car in the parking lot and you catch something out of the corner of your eye. It’s out of the ordinary, it really shouldn’t be there, especially parked between that 1998 Honda with almost no paint and the huge Cummings Diesel pick up with a bench car seat bungy corded to the tie downs in the bed, but there it is, glowing and out-of-place.
That is what these segments will be about. Sometime there will be comments from the owner and sometimes I won’t have a chance to chat with them. There is a fine line between loving cars and stalking. (Standing around while your milk getting warm and your ice cream is leaking out of the hole in the plastic bag, waiting for the owner is on the line. Hey..it only happened once!!!…Come on now!!!..You’ve done it!!!)
Wandering around Southern Arizona wine country, we pulled into the one of the winery’s parking lots and I spied this beauty.
1964 Lincoln Continental Love the shape of the grill.
Yes! Convertible with suicide doors.
I’m on the fence with these wheels, but it’s still great looking.
Some 1964 Lincoln Continental facts:
Sales for that year was 32,969 roughly and approximately only 3,328 convertibles were sold. The other option was a 4 door sedan (no two door coupe? I’ll have to check on that). The vert was sold for $6,938 and the sedan was about $700 less.
Only one engine was available for the Lincoln and that was the 430 with 320 hp. Which was good because the car weighted 5,000 lbs. It was paired up with a 3 speed auto transmission which helped it reach the top speed of 110 m/h.
Longer wheel base was about 2 inches longer then the previous years at 126 inches.
