Not only is there a ton of beautiful cars at Barrett-Jacksonauctions, there are also a lot of venders. Anything from car care products, to engine builders to custom building shops.
One of those was Karl Kustom Corvettes located in Des Moines, Ia. I had a chance to speak with Jim Hidy one of the reps for Karl Kustom at the auction this past January.
SWEET!!!!
Nice looking car, yes? HELL YES. But there some interesting things I didn’t know about these custom Vettes and how they are made.
I spoke with Jim at length and I have to tell you that how I thought these were made wasn’t even close and how they are made was pretty surprising to me. Jim set me straight.
Great Creation
These are of course C6 machines with the look of the 60’s Vettes. All the great handling and power of the C6 underpinning and classic looks. I thought ‘how cool they manufacture a body that snaps on the C6 frame. But that’s not how it’s done.
A quick recap, I had a 1967 Ford Mustang Shelby manual 4 speed transmission rebuilt and installed it in my 1970 coupe. This included a Hurst Competition Plus Shift Kit. Of course the configuration isn’t even close to the original 3 speed and the old bracket for the reverse light switch won’t go back on.
I didn’t really think of this as the time of the installation so I just zip-tied the wiring and old switch up until I picked up the conversion part for the Hurst kit. This included a reverse light switch and a properly formed bracket. Cost was about $29.00 at the same local hot rod shop I bought the shift kit from – they are car guys not salesmen, which is why they didn’t mention the light switch bracket.
Don’t asks me why I felt the need to take video of the kit still in the package but here it is:
As you can see in the video below. The switch had two screws as posts for the wiring, new switch..old school technology. Basically you’d wrap the end of a wire around the screw and tighten, not a great connection for hanging under a car, nor for the amount of vibration the 302 dishes out. Used the screws and the small ‘lock” washer to hold the electrical connectors in place. That will last.
I hope you can view this article. Has some great cars – although the saying “keep the shiny side up” doesn’t really translate – these just don’t have one.
I’d love to spend time wandering around Cuba, just to look at the cars.
There has been a lot of parking garage incidents lately but I think this one takes the cake. This isn’t some guy losing control on the nearby road and landing IN the parking garage. Not this time. This time the driver apparently went through the concrete wall of the third story of the parking garage in Lugano, Switzerland, and fell all the way down upon some parked mopeds and a tree. The 24-year old driver was only injured slightly after flying off of the third floor. You can say that this brand new 5.0 suffered a tragic death, though.
If you look up into the parking garage, you see exactly where he fell from as there is a guy looking down and a nice chunk of wall missing. It gives you a good perspective of how far this car actually fell!
The Edsel. Name sake for Henry’s son. Touted as “ugly” and a failure. I disagree.
I think they were great and I plan on own one at some point. ( I was pretty close earlier this year – just missed one at an auction.) There is just something about tooling around in one of those large and long 4 door land yacht. Anyway..one day I will, if I just borrow one for a week.
So in the last year of the Edsel what engines were available?
The car came in 4 configuration, body-wise. A 2 door sedan, a 2 door convertible; a 4 door sedan and 5 door wagon, but only two engine options.
Your two choices were of the V8 and straight six variety.
Ford‘s 292 was the V8 power plant . It sported overhead valves, an iron block and hydraulic lifters. The compression was ratio 8.8:1 and with a bore and stroke of 3.75 x 3.60. It came with a 2 barrel carb – model B9A9510-A. Interesting the block and heads were painted black and the value covers and air cleaner were red.
There was the option inline (straight) 6 cylinder. That too had overhead valves and an iron block. Bore and stroke was 3.62 x 3.60 and compression ratio 8.4:1. It displayed 223 cubic inches with 145 horse power. It was topped with a 1 barrel carb, model B9A9510F. It had the same paint scheme as the V8 but was considered a “delete” option in the Rangers series.
223 Straight (Inline) 6 cylinder with the proper paint scheme
Add 2 more cylinder and buy an extra can of paint for additional valve cover and you'll have this 292 with the proper paint.
I had previously added a can of Techron Fuel System Cleaner. This was the first treated tank. Today the Vette need filling up and I recorded the incident.
In the second video please excuse the legs shot.
This first is the status as I pulled in to gas up.
Finishing up the front seats of Mustang and putting them back in the car. Yes, I know I should have gotten all the new carpet and the heat and sound deadening but I didn’t. They are easy enough to remove so not really a big deal. I did notice while the seats were out just how thin the carpeting actually was, there is nothing between it and the floor pans, I’ve got to get those done…soon…soon.
Here’s some shots of the final production.
Drivers seat
Passenger's Seat. This is the one I just finished.
I bumped in to Bill Holtzclaw from Cartersville, Georgia, virtually (Facebook) and he shared a few pics and some detail on his restoration of a 1967 Olds F-85.
Bill's F85
“I am doing a full, frame-off restoration on this 1967 F-85 Club Coupe. It has a convertible frame, 442 suspension, steel crank 330, .030 over with W-31 cam and 2” intake valves, close ratio Muncie 4 speed and heavy duty 3.91 posi rear. It is a radio delete, heater delete, carpet delete car with the factory cloth and vinyl interior. The drive train is built and the chassis is being assembled. The interior is done, the chrome and bright work is done. Next, we’ll pull the body and put it on a rotisserie. It will be two-tone Crystal and Midnight Blue.”
“I’ve had a lot of interest in this project from some of the leading Oldsmobile collectors in the country. It is my version of what would have been a 1967 W-31, which was introduced in 1968. All of the parts to build this car back in the day were available as either RPO options or over-the-counter upgrades. The W-30 package was available as an over-the-counter package in 1967. The W-30 cam and the W-31 cam are one in the same, and the OIA kit will work for both small block and big block cars. So, it was a possibility! ”
The upholstery turned out awesome! He used NOS fabric for the seat inserts. The car was a factory carpet delete car with a near-perfect vinyl floor covering. “I cleaned it and had it dyed the color blue (same as dash pad) that I wanted. It looks absolutely brand new! I had seat belts custom made to stock appearance, and the standard steering wheel came out nice, too.”
Check out the vinyl floor covering
“I had the gauges restored by R&M restorations in Greenville, SC. The odometer was re-set to zero.” The dash bezel was restored by Chrome Tech USA. They repaired the 44 year-old plastic, re-chromed it and then detail painted it. The radio and heater delete plates were purchased from Red Venom Enterprises. “They only make the radio plate, so I purchased two and trimmed one to fit the heater control panel and the PRNDL panel. ”
Bill did the polishing himself
He installed a Sunpro Mini Tach in place of the factory clock. Looks like it came from the factory that way!
Great Job - Bill!!
Final Product
Bill is also the owner of a 1967 Oldsmobile F-85 Town Sedan with “Police Apprehender” package. It has the HiPo 330/320 hp, Heavy Duty Jetaway and 442 suspension upgrades.
Nice!!!
Might be why he’s known as OldsMoBill. “I am also known as the “Oldsmobile Police”!” Bill states.
Bill, I hope you check back with your status from time to time and thank you for sharing.
