In two months I will have been writing this blog for 1 year and I have enjoy every minute of it.
When you blog like I do, to share a specific area of interest, you are always trying to increase readership. Now if this were a commercial enterprise for me, then increasing my readership would be Job One. (Come on, which car company’s slogan was that? If Ford jumped into your head that would be correct.) However, it is not, but still I’m always searching for a way to make this blog a place more and more folks want to view.
There are a lots of ways to do that, none of them huge as far as bringing in the masses and some aren’t inexpensive and others are labor intensive. (Guess which one I do…oh…yeah…cheap and labor intensive…Average Guy….say it!!!!……Average Budget!!) While searching for ideas or processes I could take advantage of, I ran across some helpful hints. One in particular makes sense, namely, keeping the site updated regularly. This suggestion dictated that it be daily, which is really a good idea. However, the method it promoted was to jam the blog with other folks news feeds, articles and automatic updates from outside sources.
I thought about this a bit and I tooled around the web and looked at commercial blogs and forums and I realized that everyone had read this particular tip and employed it. And I thought, I just don’t see the point. The blog is no longer the owners writings, but really just a reorganization of things floating around on the web. Nope, not for me.
I still think keeping up the daily effort is the right way to go, but I can’t do it in that manner.
Although I do pop on videos that I think are cool and maybe a link to a forum or another blog, I’m going to keep the core of this blog full of original material, meaning my own scribblings and occasionally notes from the readership.
The life’s blood of a blog run like I run this one, are comments and readers. So drop me a note, ask a question, or give me a suggestion ( I do requests).
Some of you know I don’t just write this blog, but participate on other forums as well.
For a little while now, I’ve been writing bi-monthly articles for www.racinginamerica.com site.
Here is some info on the goals of the organization. No you don’t have to donate, but it is tax deductible.
Henry Ford Museum
This section of our website contains information and resources for anyone who might want to better understand this fascinating and complex sport.
Automobile racing is exciting and colorful, and those same qualities make it a stimulating and enticing subject; also conducive to developing knowledge and skills.
Our objective here is to provide both the motivation and the resources for further exploration and education.
The content here will continue to grow as time goes on. It will include more in-depth features on the history, people and innovations of American auto racing. We also will present practical applications of math, physics and science in racing, which provide career opportunities in fields that include design, engineering and a variety of technologies. All this is presented in a way that’s designed to spark interest and stimulate a desire to learn more.
Check in here often to find new opportunities and resources.
As a starting point, we offer these two downloadable Educator DigiKits in pdf format:
Science, Life Skills and Innovations in American Automobile Racing Educator DigiKit Teacher Guide and Unit Plan for grades 3-8
Physics, Technology and Engineering in Automobile Racing Educator DigiKit Teacher Guide and Unit Plan for grades 9-12
9/26/1967 Everyone loves this car AMC’s Javelin the car was in the public’s hands by 1968. I loved the body style.
1968 Javelin
10/1/1908 – Mr. Ford began selling is Model T
Model T Ford – Rag Top
(they were all convertibles!!!…just saying!!!)
Oh.. you’ll like this one.
10/2/1959 – Chevy introduces the Corvair. Believe it or not I’ve seen some of the sale footage and they treated it like a jeep. Chevy had drivers drive up embankment, up and down streams with water over the tires. This gave Ford a scare but it wasn’t until they could put together the Mustang did they really have an answer.
People love their cars. Some people love only a specific make or model. I case you haven’t noticed I have a thing for Corvettes and thing for Mustangs (yup Ford and Chevy). I enjoyed this comment from a guy who left it on my Facebook
Andy from my Facebook wrote this:
Part of the reasons why I Love Corvettes, the heritage, history and traditions. To some it’ ll be just be a car, to others it’ s part of their lives. A true Corvette owner/enthusiast will appreciate all aspects of the Corvette, from whateve…r generation. They may have a least favorite but none should be hated or looked down on, because without the last there would be no present. I Love the great community behind this Car, it makes owning one so much better. Owners all across the world willing to give others a helping hand, worldwide Corvette events are held, some over 500 owners attending, a lot for good causes. To me, that’ s something very special because this doesn’t just represent a “Car”. It represents a special select group of individuals willing to enhance the past traditions, that is Loyalty!!. I plan to hold onto it for as long as I live. Something this special is hard to come by and shouldn’t be let go. Just felt like sharing this thought!! Have a great Sunday.See More
Brent worte: Beautiful and well written Andy!
Tim Sweet – As a previous owner of a C4 and the new owner of a C6. You are right on Andy. Save the Wave!!!!
One thing I really hate is a leaky car. I don’t like it when stuff leaks inside the car and I don’t like it when stuff leaks out of the car.
I have a friend that alway says…”Hey…old cars leak. That’s just what they do.” To this I normally just respond with “Yeah…I guess so.” I say this because he has pride in his work he does on his cars and I’m not going to poke at him about it.
What I want to say is “Bullstuff!!!!” Not this day in age, there all kinds of reproduction parts and hoses that can be molded and even entire businesses that make custom hoses. If it’s a gasket that’s leaking you can make your own, there’s all kind of gasket material on the market.
If you remember back a bunch of post ago, you may recall my power steering issue with my C4 Vette. Oh…yes…my poor old vette (which now has a new home), leaking everywhere!!!!. I hated that, but it was all fixable, right down to having a place in town customize a power steering hose ( it didn’t actually get that far, the oddly shaped hose turned out to not be the issue.).
The reality is that chasing down a leak is sometimes difficult, almost always time-consuming and the likelihood that it will be expensive is high. So, no old cars don’t have to leak.
What old cars do do (that’s just as funny to type as it is to say) is vibrate. My ’70 Mustang is mostly stock parts, with the exception of polyurethane motor mounts, and it will shake stuff loose, is it a pretty raw machine. A good portion of leaks can be attributed to that alone.
A few weeks ago, I notice a dime sized dot of oil in my driveway….errrkkk….no I’m not a neat freak, my drive has spots (been meaning to get it power washed), but with my older cars I like to keep an eye out for issues. So I climbed under the car and looked around and it appeared that the leak might be from the oil plug it’s self. So I grab my 5/8 ” open end wrench and gave it a bit of a crank. Now you have to be careful, especially with the type of oil pan I have (aftermarket chrome) as it can get out of shape if you over torque the drain plug and really leak. I wiped down the pan so I could tell later on if there might be another leak.
Chrome Oil Pan and Plug
A few drives later I noticed another dime size drip. Only this time it was a bit further back. OF NOTE: My driveway is sloped, and pretty good incline at that. This causes a bit of a problem determining exactly where liquid might originate, that whole gravity thing, ya know. This drip did seem a bit further back then the last.
Again I check the oil pan and this time the oil pan gasket between the engine and the block. Nope no oil. So I go topside and start checking the valve covers. And sure enough there, there appears to be a leak in the rear of the left value cover. Not really a big deal, looks like it’ll just need new valve cover gasket, this 302 engine is wide open in the engine bay with lots of room (nothing like the 84 Vette was to get to).
Lots of room in this engine bay to work.
Valve Cover, you can see the bit of oil grunge along the bottom.
I then recalled that FelPro gaskets were used and I specifically chose the type used on drag cars, designed so that you can pop the valve covers over between heats to make adjustments. This particular set of valve covers that I purchased when restoring the car came with bolts that tighten with an allen wrench.
Screw with allen wrench (or hex wrench).
Just in case:
Allen Wrench/Hex Wrench
Hexagon end of allen wrench
So I thought…to myself (really….can you think to anyone else?) “I wonder if they are all tight?” Sure enough they were all loose. Hence the oil leak. I tightened them all down, wiped down the engine where I could reach and drove it a couple of days. No leaks!!! Now I make it a habit to check those every so often. This is BTW a good tip if you drive your muscle or vintage car.
Now the latest leak, I noticed a couple of days ago. I check the liquid laying in my drive (only about the size of a quarter) and it was power steering fluid. I’m thinking oh…NO..not again!!! I didn’t even look under the car and went straight to the computer and did a quick search for new power steering parts for my 70 Mustang. What I found wasn’t horrible, as in, well no retirement for me, got to fix up this ‘stang, but bad enough price wise to see if it was repairable.
So I crawled under the Mustang (or hunk of iron, as my wife calls it…or maybe she was calling me the hunk :^ ) and took a look. Yup, there was a leak but it appeared to be coming from the flared steel hose fitting going into the power steering unit.
Steel hose and the leaky mess.
A couple turns with a 1/2″ open end wrench and again wiped down area. I keep checking back to see if any new leaks appear.
I can say… right now…. that my 70 Mustang doesn’t leak….I don’t think!!!
So now I stand corrected, sort of. Old car do leak, hey new cars leak!! However, they don’t have to stay that way.
Tips:
1. Check under your muscle or vintage car for any liquid (hey…it’s ok if is just water from you AC..usually) on a regular basis.
2. Get under the hood and after your ooo’ss and aaahhh’s at your magnificent creation, tight things up. ( I always ooo and aaahhh!!!)
3. Get the car up in the air “”SAFELY”” and check the fittings you can’t see or reach from the top side.
4. Chase down the leaks and clean the area to make checking for a continued leak easier.
Sorry MOPAR fans, I got sidetracked. Let’s continue with the Dodge’s use of the 318.
Dodge didn’t get a V8 until 1953. That first engine was a Hemi with 241.3 cid and only 7.1:1 compression. They called it the 241. It was improved upon for the next couple of years and very cool names like, Red Ram and Super Red Ram.
Approximately 1956, Dodge began using the 315 with the Polyspheric chamber. (Here is the link from my earlier post on the Polysheric head: http://wp.me/pKHNM-gy)
It wasn’t until 1960 that Dodge began using the 318. This was, again, the Polyspheric chamber, and it came in two versions in 1960, a 2 barrel and a 4 barrel, with 230 hp and 255 hp respectively (of course) and both a 9.0:1 compression (that pretty good compression rate). The 318 was used in the Dart Seneca, the Pioneer and the Dodge Phoenix got the larger of the two 318s.
The 318 carried on through out the ’60s with the horsepower hovering between 230 and 260. Of note during that time was where the 318 was used. I was surprised to find, such as, in 1968 the Dodge 440 Coupe used the 318 (not the 440, which even non-MOPAR peeps know about that one).
The most cars sold by Dodge was the Dart throughout the 1960’s. There were actually 3 sub-models of the Dart, the Sencea which had 3 different trim levels, the Pioneer which had 5 different trim levels and the Phoenix which was the most upscale sub-model with 4 trim levels. The engine options were either the 225 slant six or the 318.
Here are a few pics:
1960 Dodge Dart Phoenix
1960 Dodge Dart Pioneer
1960 Dodge Dart Seneca (I love the fins!!!)
At the beginning of this series I mentioned that I had 1970 Dodge Dart and that it did have the 318 with a manual transmission. There was only one version of the 318 for 1970 and it was has 230 hp and 9.0:1 compression with a bore and stroke of 3.91X3.31 in. That made for a pretty quick car, as light as it was.
Well, I bet you can guess what comes next. Yes a sharp decrease horsepower. By 1972 the 318 was reduced to 150 hp and by 1975 the drop was to 145. 1976 was the last we saw of the 318 used by Dodge. The 1976 Dodge Dart was the last year for the Dart, but it went out in a big way being offered with a Police Package Code A38. One of the options in this package was the 318 and it regained some of its muscle to the tune of 220 hp.
This concludes the series on the MOPAR 318. If you’d like to offer up an engine to see more information on drop me a comment here or email me at timsweet@cox.net.
Every one that reads this blog knows that older cars, no matter how careful you, or how much you baby your car you are going to have problems. That’s the nature of any relationship. Things break, undiscovered issues, or even your own missteps can issues. You just can’t through in the towel “Honey, I’m going to have to find another mate, you just can’t run as far as you use too.” or “Sorry but that broken leg changes everthing…ur outta hereeee.” (Lawyer up…my wife is fine, no injuries, still running fine..no worries…just wanted to be clear!!!!)
Well, over the past few weeks my Corvette has been a serving up a bunch of consternation.
If you remember a few posts back I had replaced one power steering hose and need help with the power steering reservoir. That got done. Shortly after that, a leak developed from the front end and over the course of two days it got a little worse. So I pulled it in to the garage and crawled under neight..and that’s no small effort.
The power steer of course provided hydraulic power to make the turning of the front wheels easier. (There you got the basics of the how it works.) This entire process insists that the fluid, in this case power steering fluid stays in place. Well my beauty failed conform to the standards.
Rack Pinion
If you look at the image above you’ll see the plastic boots (A) that cover and protect the shaft. Those are supposed to be dry. When I touched the boot on the left side of the Vette fluid poured out, clearly it was no longer dry. What was also very very clear at that exact moment was the pain in my wallet.
Basically, the you have two options when something that is supposed to be dry is wet on a car, replace it or rebuild it. I chose both. Lucky for me the complete unit for my 84 Vette is still available through on-line Corvette parts houses. EEERRRRKKKK..While I’m writing this I have the Speed channel up on up in the corner of my monitor, they are testing an Aston Martin DBS against a Bentley w/ W12 engine…soft girl cars…of course that girl’s got some skills, putting eyeliner on at 150 miles per hour!!….end of EERRRKKK – I’ll let you know how that turns out.
A quick trip down the street to Tim Sisk proved my investigative results. I’m the Average guy with Average skills, there was not something I wanted to attempt. Additionally, it requires a front end alignment. So I order one, and because I hate having the car in the shop I had it expressed shipped, or at least that’s what I asked. It didn’t shipped and took a total of four days. What…you say…”oooohhh poor baby, took 4 days to get it here!” Hey, that’s a life time for some car guys!!!!
Now ordering the rack and pinion requires a core charge (that’s where you have to return the old part or pay the core fee – they rebuild the old part and resell it) but as I stated I wanted to do both so I paid the core fee and kept the part. This allows me to either learn to rebuild the part or sent it out to have it rebuild and store it way. Plus I have the original part, although there isn’t much benefit in collector value for having the orignal rack and pinion (numbers matching) 84 Vette, well least not for another 20 years!!!!
The part was replaced and the car realigned, in total it was out of service for a solid 7 days. Picked the car up and drove it home and that was that…and if you believe that, I have some swamp land out here in AZ to sell ya!!! Stay tune for what happened next
Oh…the Aston Martin and Bentley match up. Here the details:
Braking 0-100 to 0 (time speeding getting up to 100 and then distance measured for stopping-shortest distance wind) ….15 second from 0 to 100 for both cars, breaking the Aston won at 40 feet shorter stopping distance.
60-130 test on roll – Bentley win 13.2 second, nearly a second faster than the Aston
The rolling mile – top speed 165 mph for Bentley, 1 second faster than the Aston – 159 mph
Road course – 55.6 seconds for the Bentley 53.8 seconds for the Aston
Like I said – girls car..my 84 Vette has a top speed of nearly 200 miles an hour. My personal best, 174 mile per hour in the Vette – yeah that’s just last year. Dyno proven.
