I have a co-worker who from time to time has mentioned his Pontiac project and we’ve ‘bench restored’ a few times. But I’d never actually saw this car , nearly a picture. But thanks to our first real rain here in Southern AZ since last year I think, and the fact that we don’t do our monsoon season any other way than “harsh” my co-worker’s (we’ll call him ‘Mike’…’cause that’s actually his name) neighbor had a tree that suffered enough wind damage it and to be taken down. So Mike had to move the car, parked it behind his daily driver. Got up this morning and decied..heck, I’ll drive it to work.
And that’s how I got the pic of the 1949 Pontiac Silver Streak Delivery Van, all original and get this…..his family is the only owner the beauty every had. His grand father purchased it new. More to come on this one but here are some pics.
1949 Pontiac Delivery Van
Back Side of the '49 Silver Streak Delivery Van Pontiac style.
OK after all these years, after the car was gone. I stopped by the house. I was met by Al, short for Albert, not Alan, as Al informed me.
I told him that I had always wanted to check on the Grande and he informed I was a bit late. He said he didn’t mind answers a few questions.
So I asked Al how got the car and he said he bought it back in 1972 from some guy. “It was a nice car with an automatic.” Of course my next question was what was under the hood and he said ‘nothing’. “Took it out about 10 years ago and parked on the side of the house.” He told me he never got the engine fixed, ” ’cause it ‘cost too much.” He ended up letting the guy that did some work on it keep. “Ya know, it might have been a 302.” He said he didn’t really know want to do with the body and just ended up hanging on to it.
So I asked him where the car end up, hoping it was sent out to be restored. He said there was this guy from Texas that would stop by every now and then and ask if it was for sale. He drives large pick up and always has an empty trailer attached. This same guy that has stopped by a co-worker of mine, who has her son’s 70 Monte Carlo and her daughter’s 1969 Camaro sitting under her car port – waiting for some TLC and try’s to convince her that she should sell them to him. She chases him off each time, but he’ll swing by a few months later.
A couple of weeks ago, Texas dude, stops by Al’s home and Al decided to get the Grande out of the yard and sold the man from Texas.
We talked a bit longer about my 1970 Mustang coupe and I showed him a couple of pics on my phone and then thanked him for his time.
For the Mustang the studs pass through the track and the nuts are under the car so a little space is need. Since most average guy’s don’t have a lift in their home garage, so I pull out the trusty 2 ton floor jack and a jack stand.
As most Mustang owners know, they were built with subframes. When jacking up the car with a floor jack place it on the frame, or use the standard scissor jack that attached to the seam at the rocker panel. Either way once it’s in the air, DO NOT FORGET to put the jack stand under the car. Yes it actually takes longer to do the set up then to remove the bolts…but take the time to be save.
2 Ton Floor Jack
Floor pan plug that protect the bolts and studs.
These plugs pry out very easily. I was able to get them out with just my fingers. Once they are removed you’ll have access to the nut. The distance between the opening and the nut requires an extension and the length of the stud requires a deep socket. These were 1/2″. The Mustang was raised in Arizona (get it? First reader to drop a comment explaining “get it” wins a DVD.) and all the plugs are in place. This kept all the road grime and what not off the studs and nuts, they separated easily.
When you are done you should have this many parts.
When I purchased the Mustang I was told that the upholstery was replaced at some point. (Keep that in mind for later as well.)
As you can see in the video I wasn’t able to get the seat out of the car. I initially I figured it was because I couldn’t pull out level enough for the studs to clear the holes due to the fact that I was holding the camera. However, after putting it down I still shouldn’t get the seat out. So I climbed back under the car and found that there was a second nut on the right rear stud. I’m guess it was doubled up, when the last installer wasn’t sure whether they already but one on? And of course you can see by the previous picture that those two nuts not the same as the others.
Part III will be coming up in a day or so.
Thanks for reading.
Tim
I know, I have a lot of work scheduled for the Mustang. This includes interior work and yes maybe doing it all at once would be a good idea. But I drive it a couple of times a week and the seat is getting worse. So I decided it needed to be fixed.
The kit is from TMI and I think I purchased it from a Mustang parts dealer, but I don’t recall which one. Here’s a couple of videos on it.
What I noticed is the black piping. I know that the car was re-upholstered before I purchased it, so I’m guessing that this was not original, at least they don’t make them in the reproduction world.
I was ready an article in one of the many auto related magazines (can’t recall which one…I’m behind on my reading….a bit <<>>>) and the author was stating that it’s no longer the Mopar guys vs. Ford guys or vs Chevy, but now it’s just tuner vs. tuner.
I first realized that, he was indeed correct and secondly that it really extended into many more areas of life. But for now, I’ll stick with why I’m writing this.
When I was a kid (60’s and 70’s) there were clean lines. My Dad was a GM guy or more specifically a Chevy guy, his Dad had Mopars (but really anything that got him to a store for a ‘soda’ was fine with him). On other side of the family (Mom’s side) there wasn’t much going on there with my uncles (except one who introduced me to Corvettes at the age of about 4 or 5), except my grandfather who always seemed to have a Ford – actually they were always the huge Mercury Marques or similar Merc model.
So there were many discussion on which brand lasted longer, ran better, had more power and a very important are for ‘way’ upstate New York State, which one rusted slower (seems there were two types of cars no matter what brand – those with rust holes and those about to have rust holes). Now school was where things got hyped. Even as far back as grade school there were discussions about which car brand was better….I recall even then the full name of F.O.R.D – “Found On (side of) Road Dead”.
That was the core of a car guy’s or gal’s life back then. Even those that made a living working on them had preferences.
But that is all being lost. It’s hard to tag the exact cause or point in time this happened. However, I’m going to blame racing. Yup straight up, drag racing and oval track racing. The thought that a funny car is really a Mustang or the template fitted oval track car is a Camaro or a Camry, is merely an illusion. When the running of “real” cars stopped, the rivalry began to die.
Funny Car “Mustang” This is John Forces car…no offense intended
Not a Mustang
Camry Funny Car
Looks like the stang.
Ford Mustang
NASCAR Camry
NASCAR CAMARO
Coming up next: So where does the lack rivalry lead us?
Like you, I grew up in a GM only family. My dad bought Chevy Station Wagons (stripper Biscaynes) for family hauler duty and Buick LeSabres for his personal daily drivers. Each and every car he bought faithfully lasted 100K miles with only minor repairs and service.
Then, in the 1980s several things happened that destroyed car loyalty. One, all GM cars were exactly alike both in appearance and crappy reliability. My dad was devastated that his 1982 Buick with Olds 305 V8 was in the shop 100 days per year, each and every year of the 36 months he owned that car, then his 1989 Beretta was the same in reliability. Second, the Japanese, or rather JAPAN, INC, realized that turning cars into ‘appliances’ was exactly what America needed and wanted. Styling is not as important as 200K reliability and 60% re-sale value. Finally, Detroit failed the American consumer by trying to make big profits on SUVs rather than compete on quality car products. All of this contributed to the errosin of car loyalty.
I read an article awhile back that stated that the Asian brand cars have loyalty among themselves in that Honda people buy Toyotas and Toyota people buy Hondas, and some people only consider all Asain brands both Japanese and Korean, but American loyalty has boiled down to the large truck market only. Pick Up truck owners are loyal to only GM, Ford, or Chrysler. In fact, the article mentioned that MOST F150 owners are likely to own Toyota products as their car product.
For me, I was a “MOPAR, or NO CAR” loyal Chrysler buyer for all of my driving life. My first car was a 1969 Dodge Coronet 440 that ruled the street of my neighborhood (less the occasional MACH1 that would beat me). My second car was a Road Runner that never lost a race. Then I matured into a Plymouth Horizon, a Plymouth Laser, followed by a Shelby Charger, a Shelby Lancer, and the present day LeBaron Convertible. I bought Chrysler products because they were the underdog of the Big 3, because Lee Iacoccoa needed our support, because they were the most patriotic brand, and because they were the biggest bang for the buck.
The Daimler takeover ended that loyalty. The FIAT ownership makes permanent that I will not buy another MOPAR.
Today, I am not loyal to any car manufacturer. I can pretty much guarentee you that I won’t buy foreign in that I ‘follow the money’; in other words, Ford and GM money do come home no matter where the assembly point, or source of the car. I lean towards Ford products in that they did not take a bail out, Bill Ford is a family owner of the company, Alan Mullay is an engineer that realizes crappy cars do not sell, and the Mustang is still the very best Muscle Car for the money. Always has been, and I hope will always will be!
Submitting my rant for the day, Bill
RT @JERZEEBABY1: Auto racing returns to Trenton, NJ this weekend! http://t.co/j5p8i8dltS
RT @dustinlong: Covered Auto Racing RT @APSE_sportmedia: Retiring Bill Center 1 of a kind. Nobody outworked him. http://t.co/vasTGbmbY2 vi…
Nicola Romeo is credited with setting the foundation for Italian car maker Alfa Romeo. What a lot of folks don’t know is that Alfa was a car manufacturer before Nicola came around.
Afla stood for Anonima Lombardo Fabbrica Automobili and began production in Milan in 1910. They actually produced French cars (the Darracq) under a license, all hand built.
Darracq 1906
Nicola had an engineering degree from Turin. He first worked with mining equipment and eventual purchased Alfa’s plant in Portello.
His management skills and love of racing helped build this car .company in to a lasting enterprise.
Although, apparently their latest offering to the U.S. market of the Giulia, was not well received, design wise and the parent companies Fiat–Chrysler killed it until 2013.
This one was in the parking lot of the a local auto parts store Checker’s or O’Rielly’s….or….all those mergers are making hard to have common name that everyone can related too (remember when there was just NAPA….can’t find them very often).
1969 Chevelle 454 Restored shell
This 1969 Chevelle was merely as shell…oh but is extremely well done restoration. The paint was excellent (makes ya wonder why it was being dragged round uncovered), the inside of the shell had been as expertly sprayed as the exterior..it was almost a shame to put in the interior in there.
Reproduction gauges and not much in the way of interior yet.
The badge on the car shows that this car housed or will house 454. But however, the 454 didn’t show up on the scene until until 1970 so this must be a retro fit.
You can see the big power plant is missing.
It looks absolutely ready to for dropping that monster engine back in and hitting the strip. Hey I don’t even mind the wheels!!!
Didn’t find the owner (or driver) , part store was crowded.
Of course this isn’t a 1970, I’ll update the data a bit later.
Some 1970 Chevelle facts:
– The 454 was produced between 1970 thru 1976.
– It produced 450 hp configured with 4bbl carb
– It was designated the LS6 with 475 ftlbs of torque and 9.0:1 compression ratio
The majority of the Chevelle’s (approx. 13,000) had V8 in 1970 and approx. 10,000 had 6 cylinders.
So you are out at the mall or grabbing some groceries at the store and you are headed back to your car in the parking lot and you catch something out of the corner of your eye. It’s out of the ordinary, it really shouldn’t be there, especially parked between that 1998 Honda with almost no paint and the huge Cummings Diesel pick up with a bench car seat bungy corded to the tie downs in the bed, but there it is, glowing and out-of-place.
That is what these segments will be about. Sometime there will be comments from the owner and sometimes I won’t have a chance to chat with them. There is a fine line between loving cars and stalking. (Standing around while your milk getting warm and your ice cream is leaking out of the hole in the plastic bag, waiting for the owner is on the line. Hey..it only happened once!!!…Come on now!!!..You’ve done it!!!)
Wandering around Southern Arizona wine country, we pulled into the one of the winery’s parking lots and I spied this beauty.
1964 Lincoln Continental Love the shape of the grill.
Yes! Convertible with suicide doors.
I’m on the fence with these wheels, but it’s still great looking.
Some 1964 Lincoln Continental facts:
Sales for that year was 32,969 roughly and approximately only 3,328 convertibles were sold. The other option was a 4 door sedan (no two door coupe? I’ll have to check on that). The vert was sold for $6,938 and the sedan was about $700 less.
Only one engine was available for the Lincoln and that was the 430 with 320 hp. Which was good because the car weighted 5,000 lbs. It was paired up with a 3 speed auto transmission which helped it reach the top speed of 110 m/h.
Longer wheel base was about 2 inches longer then the previous years at 126 inches.
Having grown up working in my Dad’s body shops, was often given the honorable task of taping (masking) off the areas that weren’t going to get sprayed and areas, like windows and mirrors where you don’t want over-spray landing. I learned a few tricks that help speed up the process, but more importantly help ensure a good clean paint job. Removing over-spray is not a fun process.
I’ve tried the machines that merge the paper and the tape, great for straight lines, like the Coca Cola trucks we painted but for tight corners it just doesn’t work.
To save time, which equals a money saver and to get sharp clean lines, outline the areas with thinner tape, 1/4 inch works best. After that use the tape and paper machine and run that along the previously laid tape.
Here’s one more.
I can’t possibly tell you how much a pain it can be to tape off emblems and name plates and it’s never clean. Do yourself a big favor, figure out how they are attached to the sheet metal and purchase replacement them. You know where I’m going… remove the badges and emblems. That is the only way to do it right.
