You are going to like this pics from Red Stripe Adventure’s blog. The lowered Lincoln in stealth black and you have to agree that Hudson looks great – in spite of the WWII aircraft theme.
Thanks for reading.
So I’ve gotten the new electrical connection installed on the switch. I now need to cut off the old switch and strip the wires.
Ya know it’s hard to take a video while you a squeezed under a car on jack-stands!!!
In this video you can see the striped wires.
Installing the bracket was easy enough except that it wasn’t formed properly and had to be bent. Keep in mind this is not ‘harden’ steel and too much bending will weaken it and when the reverse lever comes back will just push the bracket backward and not allow the button to be depressed enough to make contact and complete the circuit and turn the backup lights on.
Here it is all installed.
Here it is with the car in the reverse position. You can see the button depressed.
Here is a video shot.
And the intended results:
Now I’d love to tell you that all was well, however remember the bolt and the Sharpie mark I made on it so that I could gauge how far to screw it back in?
Well I was still pretty happy with the progress and I took the car off the jack-stand and started her up and backed out of the garage. That went well, but there didn’t seem to be a first gear once I decided to pull the car forward, nor second gear. She isn’t going to move.
So I’ve got the car out of the garage and right at the edge of the drive on the driver’s side. I have to get under the car and tighten that bold a few more turns. I end up laying partially on the drive way, partially on the rocks (we don’t have grass in your yards here..we have small, gather in you pants when you are laying on them, sharp rocks) and partially on one of your shrubs. Ok, lets not forget the glowing hot Hooker header pipes..yeah…just back out of the garage…no worries the hair on my arm will grow back. Any way, I tighten it just enough to get the car to go into second gear and pull it back into garage.
It had to go back up on the jack-stands for more adjustments, and I had to the switch off once to make adjustments to the bracket. But success was achieved!!!!!
A quick recap, I had a 1967 Ford Mustang Shelby manual 4 speed transmission rebuilt and installed it in my 1970 coupe. This included a Hurst Competition Plus Shift Kit. Of course the configuration isn’t even close to the original 3 speed and the old bracket for the reverse light switch won’t go back on.
I didn’t really think of this as the time of the installation so I just zip-tied the wiring and old switch up until I picked up the conversion part for the Hurst kit. This included a reverse light switch and a properly formed bracket. Cost was about $29.00 at the same local hot rod shop I bought the shift kit from – they are car guys not salesmen, which is why they didn’t mention the light switch bracket.
Don’t asks me why I felt the need to take video of the kit still in the package but here it is:
As you can see in the video below. The switch had two screws as posts for the wiring, new switch..old school technology. Basically you’d wrap the end of a wire around the screw and tighten, not a great connection for hanging under a car, nor for the amount of vibration the 302 dishes out. Used the screws and the small ‘lock” washer to hold the electrical connectors in place. That will last.
This is my 500th post for Average Guy’s Car Restoration, Mods and Racing blog (my one and only blog). It has become a bit more board in scope than what I originally intended, but if you are a total car nut case, like me (my wife uses the “o’ word) and have AADD (automobile attention deficit disorder…..HEY..that could be REAL…you don’t know that it’s NOT!!) you want more than just a Chevy or more than just 1950’s cars. You’ll be drawn to others. (“Drawn” makes it sound like a slow process…but picture a disco era strobe light…yeah that’s a but closer to what I’m trying to describe.) I’ve moved fairly close to the edge, having a ’70’s car and a 2007 model and mixing technologies and brands, Ford and Chevy. (I need a MOPAR and a Citroen.)
Of course one of the fun things that keeps me blogging are comments, not so many posted here, but a ton on Facebook and Twitter and now even Google+. I like when a reader’s comment sparks a blog entry instead of just sitting there. That brings me to the subject of this piece.
Bill is a frequent reader and leaves comments on a regular basis. In my recent entry on the 1957 DeSoto Adventurer sold at Barrett-Jackson in Scottsdale, last weekend Bill wrote this:
Bill
Submitted on 2012/01/28 at 6:12 pm
DeSoto was Chrysler’s Oldsmobile, and I think it was unappreciated both by the public and Mother Mopar herself.
Back when I lived in San Jose, CA (actually Santa Clara) in the early 1990s, there was a 1957 Adventurer 4 door parked in a driveway with four flat tires in a neighborhood near mine. I think the car had been registered last in 1979. The body, chrome, glass, and even the interior seemed in excellent condition, yet I knew the car needed more than just TLC to become roadworthy. Each time I passed that car I wanted to leave a note and see if I could get it cheap enough to restore.
I know that 4 door DeSotos would not be collectible, or bring the big money, but somehow this car seemed to be in good enough shape that it was worth saving from being just a donor parts car. I’ll be in San Jose on business soon, and will make it a point to drive by and see if the car is still there.
Have a nice day, Bill
It’s true that in the past 4 door versions of classic cars of the 50’s and 60’s lagged as far as pricing and collectivity. But that is changing. I as work to finish up my classic car auto appraisal certification, I’m finding that, much like the cars of 1910-1940’s, 2 extra doors aren’t hurting the price they’ll bring. Just take the trend of station wagons – sure at Barrett Jackson’s you’ll only see the two door(plus tailgate) and they’ll bring ‘bigger’ money, but 15 years ago, only crazy people had wagons restored. But the prices for cars like the Pontiac Safari wagon and the Buick Vista Cruiser (Sports wagon) are bringing higher prices. (Actually I think it was Olds Vista Wagon and Buick Sports Wagon.)
58 Safari Wagon
69 Buick Sports Wagon
I’m still quoted as saying that my Mustang, because it’s a coupe and not a fast back or a sports roof, will never to be worth what I’ve spent in restoring it. Interestingly enough, you can start finding them on the web and Ebay for $16k. One recently sold for a bit more than that and it to was a 302 with 351 heads and a wing. So these things are changing. Publications like Hemmings and others are often recommending the purchase of 4 door 50’s and 60’s cars. In part because they are well priced and with the after-market bolt ‘ons’ and drop in crate motors, you can take what was originally under powered 4 door and make it a rubber melting monster.
So go get those 4 doors. Winch them out of the barns and ditches, drag ’em home, restore them back to life and drive ’em!!!!
And I hope that Bill’s DeSoto (see I already have him owning it) is still there and at the least can grab us a few pics. And if you can get some contact info for the owner, I might add a pre-MOPAR to my driveway. Thanks for the comment Bill.
The big Scottsdaleauction week is finally here, now with six companies set to to drop the hammer on literally thousands of collector cars in a mere handful of days. In typical fashion, Barrett-Jackson was the first to usher cars through the stage lights, and it’s here where we’ve been alerted to the probable sale of this 1948 Tucker (chassis #1043) currently owned by none other than noted Barrett-Jackson attendee and enthusiastic car collector Ron Pratte.
Specific details about the Tucker are lacking, other than mention of its restoration, on Barrett-Jackson’s auction description. And we use the phrase “probable sale” simply because unlike most of the lots at B-J, the Tucker is listed as having an undisclosed reserve. That said, Mike Schutta of the Tucker Historical Foundation, provided more insight.
This car is very nice and most Tucker fans are keeping a close eye on this auction to see if it will set a new record price for a Tucker. The current record is $1,127,500 paid for Tucker #1045 about 18 months ago. This Tucker is in much better condition.
An interesting tidbit is that Tucker #1043 was used as part of an advertising scheme for a golf driving range in a western suburb of Chicago back in the ’50s. It was painted Tropical Rose and Snowshoe White to match the driving range buildings.
While surfing through the Barrett-Jackson website for more information on the Tucker, we stumbled upon four other Ron Pratte-owned vehicles that will also be offered at Westworld during the weekend, beginning with the car pictured above: the 1947 Bentley Mark VI with coachwork by Franay. The Bentley was last offered for sale by Barrett-Jackson – at no reserve – at their 2006 Palm Beach auction, where the hammer fell at $1,728,000 (including buyer’s premium). At that sale, details of the Bentley were as follows:
4.5 Liter Inline 6 with a four-speed. Coachbuilt by Franay. Magnificent restoration to Pebble Beach Concours d’Elegance winning standards. This is the first major winning Concours d’Elegance car after WWII. Winning the first two major Concours in 1948, back-to-back, on the 12th of June at Enghien and the 17th of June at Bois de Boulogne. Mr. Gudol, the original owner and visionary of the Franay, was an industrialist whose sole purpose was to prove to the world that France was not only back from the rigors of war, but ready to reassert its dominance of haute couture and automotive design elegance. The awards the Franay has won over the decades is proof of his timeless vision. Mr. Gudol, in his wisdom, continued to enhance and advance the performance capacity and design elements of the Franay to push the envelope of an ever improving competitive edge in Concours d’Elegance competition. Mr. Gary Wales, who has shepherded the Franay through over 50 major awards and honors since 1990, has scaled back the number of public appearances so that the car is currently eligible for any and all Concours d’Elegance events.
Like the Tucker, the Franay Bentley touts an undisclosed reserve.
Then there’s Pratte’s 1957 De Soto Adventurer convertible, again with an undisclosed reserve. Oft-repeated generic De Soto history aside, specific details provided by Barrett-Jackson state:
Powered by the famous 345/345hp Hemi V-8 with dual quads, an automatic transmission, push-button shifter on dash, and independent torsion bar front suspension. With the division’s top Hemi V-8 under the hood, the Adventurer was an early muscle car with a set of the most aesthetically pleasing tail fins ever seen on virtually any car.
The only two cars listed by Pratte without a reserve are this pair of 2007 Shelby GT500s, which are to be sold as a pair. Details per the auction site are identical for both Shelbys:
In January 2006 Ron Pratte bought the Ford Motor Company’s newest car, a 2007 Ford Shelby GT500 VIN 00001 that benefited Carroll Shelby’s Children’s Foundation. In the past, Ford reserved the first fifty cars produced for Ford family members and senior executives or by other people on a selective list. Ford was so grateful to Ron for his generosity, they offered him the opportunity to buy two more, VIN 00002 and VIN 00005. While Ron is keeping VIN 00001, he is selling the orange Coupe and matching convertible as a pair. The successful bidder will get both cars for one price. These cars are special in other ways as well, as part of the purchase of VIN 00001 was a trip to the Flat Rock assembly plant where these legendary cars are manufactured. At the end of the tour of the assembly plant, Ron was presented with the keys to VIN 00001, VIN 00002 and VIN 00005 by Carroll Shelby and Carroll autographed all three cars for Ron. Along with his cars were three other 2007 Shelby GT 5000′s, for Carroll Shelby, Steve Davis and Gary Bennett. Ron then threw Ford a curve and said he didn’t want any of these cars shipped by rail to the owners, he wanted them trucked, enclosed, to his facility in Chandler, Arizona, bypassing the traditional dealer delivery and inspections. All of the cars, including Carroll’s personal GT 500, were delivered to the respective owner this way. This is a unique opportunity to own two pieces of Shelby and Ford history.
Barrett-Jackson’s Scottsdale auction started Sunday and will run through this weekend. For more information, visit Barrett-Jackson.com.
It’s been a while since I’ve provided an update on the restoration of the 1975 fuel injectedVW bug that I’m project managing for a former workmate. So I thought I’d post of some details andsome pics.
The car is called a “Standard” – that doesn’t mean a manual shift (although it is a manual 3 speed), that means the most stripped down, no optioned, VW you could purchase. I’m talking interior door panels with a thin covering of fake leather over (almost as thin) cardboard. Rubber floor coverings (I wouldn’t even call them mats!!!), a headliner, cloth seats were the total of trim in side. There was no upholstery covering the rest of the interior – just painted metal. It did have an AM radio – which was replaced it a JVC.
Not much to the door panel.
Headliner and sun visors are about the only other upholstery, the rest is painted red like you see here.
In fact importation of these striped down models was halted shortly after about 100 here shipped to the US in 1975. This is one of the 100 allowed in. Pretty cool story.
This particular car belongs to June Yang and she purchased the car, brand new, while attending college in Iowa. The car lived in Iowa it’s entire life (until now) and it show’s signs of every winter too. The car had been stored for years and suffers from a severe case of rust and by all accounts shouldn’t able to sit up-right on four tires.
But like many folks, who love their V-dubs, June has a lot of memories tied to the rusted fenders, college, and other life milestones. So when she moved to Tucson, Az she thought of bring the Bug with her. She was advised that the car was not safe to drive down the driveway much less the block and certainly not 1/2 way across country!!! And that was an
understatement!!!!!
I met June when she came to work at the same establishment where I labored. I’m not a closet car guy and a visit to my office at that time it was pretty clear. Eventually she asked about having the car fixed and her desire to have it join her in Az was discussed and although I had no idea the exact condition. I helped arrange transportation to Tucson.
The goal was to get it here to some place that could get the car running (it wouldn’t start and brakes hadn’t been serviced in some time). In run condition, the thought was we could then running it around (save a few $$) to the various places I had planned to do the work. Unfortunately even running it wasn’t going to be safe enough to drive. See here<<<<>>>>
The transport had one bump when the driver’s truck died en route. The company immediately arranged for a local company to pick it up and finish the trip. I believe June called them every hour for updates. Eventually, the car showed up at my favorite auto repair shop and Tim Sisk gave me a call to come look the car over.
These pictures don’t nearly capture the condition this car, frankly I was taken back as well and I grew up driving a 1930-ish Ford stripped down pick-up that served as an alternate tractor on my grandfather farm, in upstate New York – no floor boards and the like. This VW was nearly eaten alive by oxidation.
Rust 1
Rust 2
And here's a little side view.
See the highlighted area? It's not attached. It should be. It holds the body to the frame!!
So are you saying WHAAAATTT???? Pretty much the standard response… but don’t fret….there’s a plan!!!
C6 performance convertible and its 60th Anniversary Package will be unveiled at Barrett-Jackson, where the first public version will be auctioned off for charity.
Some features:
The 427-cubic-inch (7.0L) LS7 engine is from the Corvette Z06. Rated at 505 horsepower and 470 lb.-ft. of torque. The 427 Convertible is only available with a six-speed manual transmission.
The LS7 was co-developed with the Corvette Le Mans-winning GT1 engine with:
– lightweight titanium connecting rods and intake valves
– racing-inspired high-flow cylinder heads
– a dry-sump oiling system
Suspension/Brakes/Wheels
– the same driveline and rear axle system as the Corvette Z06
– Magnetic Selective Ride Control
– 19-inch front and 20-inch rear lightweight machine-face Cup wheels
– PDE performance packages – come standard and include unique gray-painted pockets.
– a rear-mounted battery
The 427 Convertible Body has:
– Carbon fiber raised hood (introduced on the 2011 Z06 Carbon Edition)
– Carbon fiber Z06-style fenders
– Carbon fiber floor panels
– The “CFZ” carbon fiber front splitter and rocker panels
Weight:
427 Convertible’s curb weight to 3,355 pounds.
Other specs:
– 505-horsepower LS7 engine, it gives the 427 Convertible a power-to-weight ratio of 6.64 – or one horsepower for every 6.64 pounds of vehicle mass
– one of the fastest convertibles in the world, delivering estimated 0-60 performance of 3.8 seconds, quarter-mile performance of 11.8 seconds, lateral acceleration of 1.04 g and a top speed of more than 190mph.
