I hope you can view this article. Has some great cars – although the saying “keep the shiny side up” doesn’t really translate – these just don’t have one.
I’d love to spend time wandering around Cuba, just to look at the cars.
Whether you’ve seen a Ford Mustang Boss 302 in shambles, one tearing up the track, or perhaps another upon the showroom floor–it doesn’t matter. Bottom line is, we’ re pretty sure anyone with a blue-blooded pulse wants one. So, if you are one of the lucky ones to get your paws upon the steering wheel consistently, then you might want to listen up. Steeda Autosports now has a complete line of aftermarket parts to amp up the already awesome 2012 Boss 302 in order to tweak the suspension, intake, and some additional custom tuning to make every droplet of atomized fuel count.
So just what all’s in store? Keep reading to get the rest of the story via Steeda & be sure to check out their site loaded with offerings!
Steeda News Release
Steeda Offers a Full Line of Boss 302 Performance Products
The new Ford Mustang Boss 302 is viewed by many as the best overall Mustang Ford has ever produced. As good as it is in original form Steeda has found ways to improve it and take it to the next level.
Starting with the suspension, the Steeda Boss springs are designed to slightly lower the vehicle in the front and lower the rear approximately 3/4”. With the front height remaining largely unchanged, the front roll center geometry remains optimal. However, by substantially increasing spring rates, body roll is reduced as is nose diving during heavy braking. Thanks to our years of experience with Mustangs, we are able to do this and still maintain near stock ride quality characteristics.
We have also designed several levels of suspension packages that include our awesome Boss springs, adjustable front and rear swaybars , adjustable upper strut mounts and more to achieve the maximum handling potential of the Boss 302 Mustang.With the new Boss 302 Mustang comes the new Boss 302 engine. We took our years of experience building performance proven cold air induction kits and designed a kit tailor made for this heavy breathing new engine. Starting with a high flow filter we added our “race tested” velocity stack” entry, this is located within a stainless steel heat shield with a rubber gasket to seal it against the hood. We also retain the factory cold air feed duct from the front bumper. We then added a 101mm MAF housing which is coupled to a new high flow inlet tube with our Cool-Tube technology. All of this adds up to 30 plus horsepower when combined with the required custom tune that compensates for the increased airflow.
So, if you are looking to get the most out of your Boss 302 Mustang, look no further than Steeda Autosports!
Any Alice Cooper fans out there? If you worship Mr. Cooper plus love classic ‘Stangs, the best of both worlds is about to cross the auction block at Barrett-Jackson this month. A red 1965 classic Ford Mustang with a 4-speed automatic 289 V-8 and only 35,915 miles. Supposedly fit his golf clubs in the trunk perfectly!
Here is an opportunity to own Alice Cooper’s 1965 Ford Mustang fastback with 35,915 original miles. Alice used this car for the Golf courses, going to the mall and dinner from time to time. We will include a set of Calloway golf clubs for the new owner of the car.
Dec 16, 2011 the last produced Ford Ranger. This isn’t just the end of the Ford Ranger, its the end of the Cologne V6 and the closing of a plant that has been producing car since 1925 – over 25 million. The last Ranger was a fleet car going to Orkin Pest Control – yawn – couldn’t have been a Raptor or and F150 Harley Davison version.
2012 V6 Ford Ranger - The last one.
The plant produced armored cars during WW II and 50’s Fords, early Crown Vics and Galazies. It also produced one of my favorite cars the Ford Sunliner.
The world’s most significant all-Corvette show is moving back to central Illinois. After nearly a decade of being held at the Pheasant Run Resort in St. Charles, Bloomington Gold will be moving about 115 miles south to the town of Champaign for 2013, near where it first began nearly four decades ago.
According to Bloomington Gold CEO, David Burroughs, “Although it will be hard to beat the beautiful fairways of Pheasant Run, input from Corvette-owning customers wanted more opportunity for socializing and driving events as part of the entire Corvette show experience. It needed to become more dynamic.”
David went on to say: “Our customers own Corvettes because they are fun to drive. So, we needed a venue that not only served our exhibitors and customers who buy/sell and certify Corvettes, but also a venue that makes it easy and fun to navigate to/from and around the community before, during, and after the show. Therefore, we needed a small-town atmosphere with big-town hotels, great facilities, and quick escape routes to miles of country roads. Champaign, Illinois, has the smaller-town atmosphere, and the University of Illinois Assembly Hall grounds have everything else.”
So mark your calendar for June 27-30, 2013. Not only will this be the first year for the new venue, but it will also be the show’s 40th anniversary. And if you’ve ever attended one of the Bloomington Gold shows, you’ll know that there’s something very special planned that every Corvette enthusiast will not want to miss. In the meantime, the 2012 edition of Bloomington Gold will remain in St. Charles and take place June 21-24. For more information, visit BloomingtonGold.com.
I just recently picked up a copy of GMs new Performance catalog and all I can say is WOW!! But we’ll dive into that in a future post.
Gracing the cover was the latest and greatest COPO Camaro. You remember those special order packages. Well they have brought it back and factory racing just jumped up and shouted “LET DO IT!!!!” [vodpod id=Video.15839761&w=425&h=350&fv=%26rel%3D0%26border%3D0%26]
1973 was a good year, I was a still in high school and big engines weren’t extinct yet. Ford had a big assortment. We are talking 10 to choose from if you didn’t count the Mustang engines.
Ford Pinto (this will be a parking log spot light coming up)
On small size 6 cylinder were still king but 4 cylinder was available for the Pinto. For the larger engines displacement was large and the horse power small.
There was only one 4 cylinder available, reserved for the ill fated Pinto. It sported an overhead cam and iron block. It displaced a whopping 122 cubic inches and as one would expect had the smallest bore and stroke – 3.58 x 3.03. The compression ratio was 8.2:1 and it tore up the street with 86 hps. (No I didn’t for get the “1” in front of that.) It was topped with a Ford/Weber 2 barrel carb.
2.0 Pinto Engine
The six cylinders came in 2 varieties and were used in the Maverick and Torino. The first was dubbed the Maverick 6 cylinder. It was configured with overhead valves and a cast iron block. With the bore and stoke 3.68 x 3.13 it was able to displace 200 cubic inches. The compression ratio was slightly higher than the 4 cylinder at 8.3:1 but it was fitted with a 1 barrel Motocraft carb resulting in only 84 hp.
The second ‘big brother” six cylinder was called the Maverick/Torino. Again it had the overhead valves and cast iron blocks, same as its little brother, but it had a greater stroke 3.91 (3.68 X 3.91) compared to the its sibling 3.13. The compression ratio was lower (8.0:1) and topped with the same single barrel carb it managed 88 hps.
The Torino was not a small car so it really need those 4 extra hps!!!
Ford 6 cylinder - nicely restored!!!
V8s for 1973 coming up and then the Mustang engines.
These are some of the best styled cars for that year. ( I really like the convertible for 1963 Merc as well). The ’64 Comet looked like it was moving, while standing still.
1964 Mercury Comet Cyclone
The engine line up for the 1964 Mercury came in 3 flavors. The Comet, the Cyclone and Mercury versions.
The Comet engine was a 6 cylinder, overhead valve with a cast iron block. 170 cid with a bore and stroke of 3.50 x 2.93 and combined with a compression ratio of 8.7:1 it produced 101 hps. Well not actually a powers house with the one barrel carb, C3YF-9510E.
Now the Cyclone engine was a bit of a bump. It was a V8 with overhead valve and a cast iron block displacing 289 cubic inches. The compression ratio 9.0:1, bore and stroke of 4.00 X 2.37 and hooked up to a 2 barrel carb (C5MF-9510A) helped produce 210 hps.
The 3rd option was the most powerful, producing 250 hps and matched up to the cyclone engine, except where it matters. Displacing – 390 cubic inches with the bore and stroke 4.05 x 2.37, 9.4:1 compression ratio and topped with the Ford C4MF-9510D two barrel carb.
Fords 2 Barrel C4MF-9510D Carb
1964 Mercury Colony Park Station Wagon - carried the 390.
