From Michael Woodword – hey, I just got a 1993 thunderbird with a 5.0 HO. every time I come to a stop, the oil pressure drops dramatically. I was wanting to know if you would have any idea what could cause this. Thank You
But when I get back up to speed its fine.
It would be nice to get an opinion from an expert which ar
nt easy to find
ANSWER: Michael. The pressure should drop when you stop, dramatic swings in the gauge could be a problem with the gauge or you need replace your oil sending unit.
I recent attended a showing of the latest Transformers movie (“Dark Side of the Moon“) and if you know anything about this series or of the cartoon of years gone by, you’ll know that the main characters are machines that turn in to robots. Most of these are vehicles, cars, trucks, semis and even military aircraft.
The car group included a lot of chevys this time, a Camaro which is one of the main stairs, an Impala and a Corvette (actually a representation of a prototype Corvette). The Corvette transformed into a rollerblading robot – which I thought unfitting of my favorite car.
There is the human hero and of course a hot model as his object of desire.
When the hot model was threatened or in harm’s way you could hear the audience get involved. But when an evil robot was about to execute the Camaro character the audience got really vocal. Kids cried at that images, thinking that the Camaro was about to get wacked, forget about the girl….just don’t hurt the car!!!
Yes we love your cars. Oh and the good cars – the Chevy‘s– saved the world again.
But that’s movies and you can just enjoy it with no lasting harmful effects..unless you are me or maybe it wasn’t me but the subliminal messages. I left wanting a Camaro, but not just any 2012 Camaro, but a yellow with black striped bumble bee Camaro.
It must be subliminal messages, I had the same desire after watching Will Smith zip through the empty streets of New York City in the 2007 Shelby GT500 Mustang in his move ‘I Am Legend’ yes the red with white stripes.
From time to time I check out a product that I hear about, in this case, from a repetitive mail from Griot’s garage. This is a catalog of sorts, with a lot of merchandise and everything you need to spruce up your ride.
Thier “Long Lasting Tire Dressing” is the first item I’ve tried.
If you recall I did a review a while back on a tire gel here is the link: ” Like and Don’t Like – Products (Tire Gel) and Tools (Thread Chasers)” http://wp.me/pKHNM-aJ
Now before we start, the bottle you see in the video has instructions and to be fair, I’ll give you any variations.
The direction say, roughly, clean the tire, apply with application pad and that a light application will give you a shine and subsequent will increase the luster. Not much there to go on.
Now you need to know that I applied the dressing with an old sock. Most manufactures always try to sell something extra and kt, which is an “applicator”, the magic potion and a terry cloth/micro fiber towel. I normally don’t go for that sales pitch. So that was the only deviation.
A couple more variables:
1. The dressing was stored in my garage. The temperature in there today was about 105 degrees. I applied the dressing while the car was in the garage.
2. The temp outside was about 108.
3. As you will see my Corvette’s tires have small sidewalls and a lot of small raised text and logo.
Ok so here are a couple before pics:
Before, notice the off-color
More of the discolor and you can see there isn't must sidewall.
There is a lot of emphasis on numbers for production when it comes to collector cars and I get that, who wouldn’t what a low product something or other.
So I got to thinking about production numbers and thought it would be interesting post some up from time to time.
Now in 1902 there weren’t many cars being produced but there were 8 makers.
OK after all these years, after the car was gone. I stopped by the house. I was met by Al, short for Albert, not Alan, as Al informed me.
I told him that I had always wanted to check on the Grande and he informed I was a bit late. He said he didn’t mind answers a few questions.
So I asked Al how got the car and he said he bought it back in 1972 from some guy. “It was a nice car with an automatic.” Of course my next question was what was under the hood and he said ‘nothing’. “Took it out about 10 years ago and parked on the side of the house.” He told me he never got the engine fixed, ” ’cause it ‘cost too much.” He ended up letting the guy that did some work on it keep. “Ya know, it might have been a 302.” He said he didn’t really know want to do with the body and just ended up hanging on to it.
So I asked him where the car end up, hoping it was sent out to be restored. He said there was this guy from Texas that would stop by every now and then and ask if it was for sale. He drives large pick up and always has an empty trailer attached. This same guy that has stopped by a co-worker of mine, who has her son’s 70 Monte Carlo and her daughter’s 1969 Camaro sitting under her car port – waiting for some TLC and try’s to convince her that she should sell them to him. She chases him off each time, but he’ll swing by a few months later.
A couple of weeks ago, Texas dude, stops by Al’s home and Al decided to get the Grande out of the yard and sold the man from Texas.
We talked a bit longer about my 1970 Mustang coupe and I showed him a couple of pics on my phone and then thanked him for his time.
For the Mustang the studs pass through the track and the nuts are under the car so a little space is need. Since most average guy’s don’t have a lift in their home garage, so I pull out the trusty 2 ton floor jack and a jack stand.
As most Mustang owners know, they were built with subframes. When jacking up the car with a floor jack place it on the frame, or use the standard scissor jack that attached to the seam at the rocker panel. Either way once it’s in the air, DO NOT FORGET to put the jack stand under the car. Yes it actually takes longer to do the set up then to remove the bolts…but take the time to be save.
2 Ton Floor Jack
Floor pan plug that protect the bolts and studs.
These plugs pry out very easily. I was able to get them out with just my fingers. Once they are removed you’ll have access to the nut. The distance between the opening and the nut requires an extension and the length of the stud requires a deep socket. These were 1/2″. The Mustang was raised in Arizona (get it? First reader to drop a comment explaining “get it” wins a DVD.) and all the plugs are in place. This kept all the road grime and what not off the studs and nuts, they separated easily.
When you are done you should have this many parts.
When I purchased the Mustang I was told that the upholstery was replaced at some point. (Keep that in mind for later as well.)
As you can see in the video I wasn’t able to get the seat out of the car. I initially I figured it was because I couldn’t pull out level enough for the studs to clear the holes due to the fact that I was holding the camera. However, after putting it down I still shouldn’t get the seat out. So I climbed back under the car and found that there was a second nut on the right rear stud. I’m guess it was doubled up, when the last installer wasn’t sure whether they already but one on? And of course you can see by the previous picture that those two nuts not the same as the others.
Part III will be coming up in a day or so.
Thanks for reading.
Tim
I know, I have a lot of work scheduled for the Mustang. This includes interior work and yes maybe doing it all at once would be a good idea. But I drive it a couple of times a week and the seat is getting worse. So I decided it needed to be fixed.
The kit is from TMI and I think I purchased it from a Mustang parts dealer, but I don’t recall which one. Here’s a couple of videos on it.
What I noticed is the black piping. I know that the car was re-upholstered before I purchased it, so I’m guessing that this was not original, at least they don’t make them in the reproduction world.
So you are out at the mall or grabbing some groceries at the store and you are headed back to your car in the parking lot and you catch something out of the corner of your eye. It’s out of the ordinary, it really shouldn’t be there, especially parked between that 1998 Honda with almost no paint and the huge Cummings Diesel pick up with a bench car seat bungy corded to the tie downs in the bed, but there it is, glowing and out-of-place.
That is what these segments will be about. Sometime there will be comments from the owner and sometimes I won’t have a chance to chat with them. There is a fine line between loving cars and stalking. (Standing around while your milk getting warm and your ice cream is leaking out of the hole in the plastic bag, waiting for the owner is on the line. Hey..it only happened once!!!…Come on now!!!..You’ve done it!!!)
Wandering around Southern Arizona wine country, we pulled into the one of the winery’s parking lots and I spied this beauty.
1964 Lincoln Continental Love the shape of the grill.
Yes! Convertible with suicide doors.
I’m on the fence with these wheels, but it’s still great looking.
Some 1964 Lincoln Continental facts:
Sales for that year was 32,969 roughly and approximately only 3,328 convertibles were sold. The other option was a 4 door sedan (no two door coupe? I’ll have to check on that). The vert was sold for $6,938 and the sedan was about $700 less.
Only one engine was available for the Lincoln and that was the 430 with 320 hp. Which was good because the car weighted 5,000 lbs. It was paired up with a 3 speed auto transmission which helped it reach the top speed of 110 m/h.
Longer wheel base was about 2 inches longer then the previous years at 126 inches.
