Limited Edition Beetle GSR unveiled at Chicago Auto Show

Limited Edition Beetle GSR unveiled at Chicago Auto Show.

The stripey new GSR secures a 150 hp increase from its predecessor, amping up power to the front wheels to 200 hp, enabling a sprint to 100 km/h (0-62 mph) in just 7.3 seconds. With a top speed of 230 km/h (143 mph), power is made available to the wheels via either a 6-speed manual or DSG autobox. VW’s tried and true, turbo-charged 4 cylinder provides the go juice. And unlike the 40 year old’s 15-inch steel rim setup, the new GSR gets serious footing with black “Tornado” 19-inch alloy wheels and 235/40 rubbers.

Volkswagen's new Beetle GSR - only 3,500 will be made worldwide

I think they look “ok” and 200 hp ain’t bad in the little two door.  Can’t owning one, however they are going to be limited to 200!!!

Follow Up – Rumble Seat Mustang at 2013 Barrett-Jackson Scottsdale

So after a little follow-up I found that the car was a promotion created by Ford and Autocraft.  See below.

 

Lot 446.1 – 1969 Ford Mustang Convertible

Sale Price: $24,750

TMN Rating: 9

TMN On-Site Review: Other than a few body panel mis-aligns, presents nicely.

Seller Description: An extremely rare and most unusual Mustang, a “Rumble-Seat.” This particular package was a joint effort by Ford and Autocraft of Dearborn, Mich. The option was not shown on the Build Sheet or Ford Window Sticker because the conversion was done after assembly. It was a blossom-time sales promotion offered only during April 1969 to certain Michigan Ford Dealers. Documented by two different magazine articles it is still uncertain exactly how many were done. This Mustang is believed to be the only one in Meadowlark Yellow. This Mustang was built April 16, 1969 and delivered to Jack Dykstra Ford in Lansing, MI. It is a V8, automatic, power top, factory tachometer, power top, Rumble Seat. It has only 56,000 Miles.

via 2013 Barrett-Jackson Scottsdale Mustangs on the block: Wednesday 1/16.

CRCSE SHOW: 1965 Chevrolet Bel Air « Classic Recollections

CRCSE SHOW: 1965 Chevrolet Bel Air « Classic Recollections.

You can’t help like this car.

DSC_7507_72

Barrett Jackson – Recap Part IV – Test Drive 2013 Mustang 5.0

Before we get to the drive, it’s worth noting that my daily driver is a base model  2007 Corvette 410 hp with a stage 3 clutch.  This puts down a lot of torque.  My other car is 1970 Mustang pushing out 300 hp and I dive that a couple times a week.

Last year, I drove the Ford Taurus SHO and that was a nice with plenty of pep. But I wasn’t ready for this years ride, 2013 Mustang 5.0.

The car manufacturers set up a small auto cross track, under a 1/4 mile in length, it had a starting line  and brief straight way in to a “switchback” turn, another straight way combined with a moderate turn and than the finish.

You are sharing the track with mild-mannered cars, like a Ford Focus and Chevy Cruz and the Corvettes and Camaros of Bondurant School and the Super Snake and Shelbys.  There is a lot going on.

So I hopped into the Mustang, along with a ‘handler’ ( he rides along) and we pull in to line behind two Bondurant Corvettes.  This Mustang is the automatic version of the 412 hp 5.0 and it feels small and light (much different than my C6).

The handler gives me the nod and I hit the gas.  The rear wheels spin for a second and the you can feel the 420 hp launch the car forward. I was at the switchback curve in about 3 seconds – didn’t notice the speedometer but the handler said ‘slow into..’ but I was in an out of corner.   The Mustang had excellent handling at about 50mph in a tight turn.  I told the handler I that I raced SCCA with my vette, but  don’t think that made him any more comfortable.  I finished curve and punched the gas and breezed through the short  straightway and then the final curve at about 60 mph and a quick braking and done!

Ok…again, I’m no big time automotive journalist, but I know cars. So, here are my impressions of the 2013  5.0 Mustang.

Interior was much better than previous years and it felt like sports when sitting in the seat, much like my Vette.  I’m not normally a automatic transmission enthusiast but this one shift smooth as ice on a professional hockey rink.  It launched really well, didn’t fell like 390 ft lbs of torque, felt straight and although a didn’t notice the band of rubber it  was sporting, it did feel grip well.  The car felt stable going into the two curves and it was enjoyable.

With more horsepower than my Vette it still couldn’t match the quickness of my C7  (oh….Freudian slip) …um  C6 with more torque  and almost 500 less pounds ( 3350 vs. 3800 curb  weight).

Over all I WOULD purchase a new Mustang – but something at the next level than the base model 5 liter.  The Boss 302 (maybe in the Laguna Seca) or the GT500)

Or something in a “Super Snake”??

Thanks for reading!!!

Tim

 

Barrett Jackson Recap Part I

Well once again I attempted to do some “nearly live” postings from the “big show” but my recent move to my own a new domain had some glitches and well  my Android phones battery didn’t hold up.

But there were a lot cars and a ton of other sites and activity.

One of which was driving the 2013 5.0 Mustang with 412 hp!!!

So grab the RSS feed or sign up for emails because for the next few blog entries I’m going to ‘expound’ on some of my highlights.

Enjoy.

Tim

Mustang010809

 

Stock Car Racing News – articles | Several Fords Caught Up In Daytona 12-Car Wreck | The Official Site of Ford Racing | Racing.Ford.com

Stock Car Racing News – articles | Several Fords Caught Up In Daytona 12-Car Wreck | The Official Site of Ford Racing | Racing.Ford.com.

JAN. 11, 2013
A number of Ford drivers were involved in a 12 car wreck early in the afternoon drafting session at Daytona Preseason Thunder testing Friday afternoon. The wreck ended the day for the No. 99 of Carl Edwards and the weekend for Brad Keselowski, Joey Logano, Marcos Ambrose and Aric Almirola. Ford Racing caught up with several of those affected to get their thoughts.
MARCOS AMBROSE, No. 9 Stanley Ford Fusion — HAVE YOU HAD A CHANCE TO SEE WHAT TOOK PLACE BESIDES WHAT YOU WITNESSED FIRSTHAND BEHIND THE WHEEL?  “No, I haven’t seen it yet. But it doesn’t really matter. I just feel bad for my Stanley and Richard Petty Motorsports team. You know, I had junior pushing me. He’s just a great drafter, really can feel it well. I guess I just got caught on the edge of the bumper there and with the shaped noses and the tires, just spun me out. It was hardly even a bump. It was just enough at the wrong angle, wrong time and just went for a spin. I feel bad for everybody because quite a few cars were torn up there. But we’ll repair this one and probably build a couple new ones and get ready for Speedweeks.”

WAS IT MORE OF AN INCIDENT OF A TYPICAL DRAFTING TYPE DEAL WITH THIS OR WAS THIS MORE RELATED TO THE NEW CARS?
  “Well, certainly we used to get greedy with the old cars. It was very easy to bump draft. You really had a good square surface to push from. You could get across on an angle and still get away with it. So I guess we are used to that.  I didn’t think anything of it. I got a couple shots from him down the backstretch and we carried some steam. Just the third shot just spun me out. So I definitely think it’s a consequence of the new shape, and like a downforce, the car’s very light and it doesn’t take much.”

ARIC ALMIROLA, No. 43 Smithfield Ford Fusion –
“I actually had just gotten in the draft two laps before that. We came in and made some adjustments and it was a lot better. I am not sure what happened. I saw Marcos get hooked but couldn’t tell who it was. It is just part of this kind of racing. We are in a big pack and if something goes wrong at the front we are all in it. Maybe the bad luck is out of the way before we come back here for Speedweeks. You never want to tear up race cars, that is no fun. The bright side is that the change we made is better and hopefully when we come back down here for Speedweeks we won’t be in that big one.”
WHAT IS YOUR SITUATION WITH A BACKUP CAR?  “I don’t know. We get a ride from Roush and I know the 99 was in the wreck as well and our two cars were in it. I don’t know if we will go home or wait for the other Roush teams to finish testing. We will have to wait and see.”
BRAD KESELOWSKI, No. 2 Miller Lite Ford Fusion – WHAT DID YOU SEE?  “I didn’t see anything. I saw cars smoking and wrecking in front of me. I think I ran into the back of the 43 and someone ran into me. That is just the way this deal is. It is unfortunate but sometimes you have to wreck ‘em to learn.”
WHAT DID YOU LEARN IN THE DRAFT WITH THIS NEW CAR?  “The sport is rewinding. That is the important thing to say. The sport advanced to the two-car tandem three or four years ago and there were certain things you could do then that you couldn’t do in the past without wrecking. Now the rules package is back to where we were in the early 2000’s when the fans enjoyed the racing better. I think we as drivers have to rewind to how we used to drive those cars. This is how you do it. You make mistakes and learn and that is part of it. I might be the guy that makes the mistake next time so I can’t be mad about it. It is unfortunate that there are torn up cars but lets be honest, it is January and we have another month-and-a-half to build them right. Nobody if the field was going to race these cars anyway. We will build another one and have the Miller Lite Ford ready for the Daytona 500.”
IT LOOKS LIKE YOU CAN’T GET PULLED UP TO EACH OTHER TIGHT ON THE BACK BUMPER. CAN YOU NOT DO IT OR IS IT NOT THE FASTER WAY? “I think you can see from Dale that you can do it but we are all learning the consequences and nobody wants to be that guy. Unfortunately somebody has to be that guy. That is the way it is.”
JOEY LOGANO, No. 22 Shell Pennzoil Ford Fusion – “It is unfortunate that we tore up the Shell Pennzoil Ford Fusion. We weren’t taking this one back anyway so the chances are we were going to cut the body off it and do something different anyway. It isn’t the end of the world for us but I would have liked to get another day of testing. That would have been more valuable than the car for us even. It is a bummer for the guys that work on these things. I don’t even know how that started. I just saw smoke and we all ran into each other. It all happened too quick.”
WHAT WAS IT LIKE IN THE PACK? HOW WAS THE CAR HANDLING?  “It was good for me. The car didn’t have a ton of speed but it handled really good. We were making pretty good gains. Hopefully we will bring back a car that handles good with some more speed and we can go out there and get some trophies when we come back here for Speedweeks.”
CARL EDWARDS, No. 99 Fastenal Ford Fusion – “This is okay. The car is barely tore up. It isn’t like we flipped or anything. It is really too bad but I don’t know how hard you are supposed to test. You want to learn everything you can. We made it almost 90 minutes. That is pretty good for us as a group of guys (laughter).”
BIFFLE SAID THE BACK END FELT LIKE IT WAS LIFTING. DID YOU FEEL THAT?  “Yeah. The cars are stuck less and they are looser. That is good for racing. It is good for the fans. It will make it more exciting and make pit strategy come into play. If you put tires on you will be able to go faster. I think all of that is good. This is going to be a heck of a race. I like that the cars were sliding around and hard to drive. It will make it a fun race.”

Thanks for reading.

Tim

 

 

2014 Corvette Stingray

So by  now you’ve heard and mostly seen the new C7 Corvette for 2014.

I don’t think there’s been a more redesigned Vette since the 1984 C4.

5 Driving modes

7 Speed Manual transmission

99 lbs lighter than the C6

Direct Injection with push-rods in a small block

And Camaro taillights!!!

Here are some pics:

2014-Chevrolet-Corvette-6.2L-LT1-engine-623x389 2014-corvette-stingray-01 2014 Chevrolet Corvette Stingray 2014 Chevrolet Corvette Stingray

Tell me what you like and what you don’t!!

Tim

A Great Car Collection and Super Cool Garage!!

With Barrett Jackson Auction just a few days way.  Take a look at Craig Jackson’s Garage  in Paradise Valley, AZ

 

Very cool

Tim

 

 

 

 

Next-Gen LT1 6.2-Liter V-8 for 2014 Corvette Revealed with 450 HP, New Tech – WOT on Motor Trend

With the new C7 just days away with from it’s reveal – will it look the a Camaro or not much of a change from the C6?

We  don’t exactly know, but what we do know it will have the GM small block a mainstay for 57 years.  This version will be almost all new and dubbed the “LT1”,  (after the 70’s engine) and will be naturally aspirated with direct fuel injection (the first with push rods).  The idea is that the base Corvette will have 450 hp and 450 lb-ft, compression will be 11.5:1 and get 26 miles per gallon (yeah….RIGHT!!).

Read some more at the link below and in the Feb 2013 Edition of Motor Trend read “Up Close and Personal With the LT1” (page 15).

Next-Gen LT1 6.2-Liter V-8 for 2014 Corvette Revealed with 450 HP, New Tech – WOT on Motor Trend.

6.2 Liter LT1

6.2 Liter LT1

Thanks for reading.

Tim