1970 Mustang – Getting the Boot!!!

Replaces that is, boot as in shifting boot.  (Were you thinking…since I just got back from the Barrett Jackson Auction.. I was considering getting rid of the Stang ?   Nope..but I tell you there were a couple of cars I’d even swap for…that’s for sure!!)

When the 4 speed trans got installed we used the old rubber boot and it did tear.  So I replaced it with a nice leather replacement from Scott Drake.

Ripped Rubber boot

See the boot:

[vodpod id=Video.15992027&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0090.mp4]

Boot Replacement 1, posted with vodpod

Here is a quick look gaping hole:

[vodpod id=Video.15992144&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0089.mp4]

Boot replace2, posted with vodpod

Holes to be drilled:

[vodpod id=Video.15993270&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0091.mp4]

4, posted with vodpod

The chrome plate (well not really chrome) was originally held in place by the last fold of rubber on the boot.  This isn’t possible with the leather replacement so I had to improvise.

[vodpod id=Video.15992323&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0092.mp4]

boot replace 3, posted with vodpod

Installed:

[vodpod id=Video.15992683&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0093.mp4]

Boot Replacement 6, posted with vodpod

 

So the  boot and trim are in stalled, but of course you leave those ugly bolts sticking out.  I originally thought that I would get some chrome bolts to replace, but they aren’t inexpensive as I found out when I replace my 1984 Corvette’s valve cover bolts with chrome…hey..they keep the chrome locked up at the local Ace Hardware!!!  <<>>  So since I still have to replace the carpeting (I could change my mind later about the bolts) I opted for some plastic chrome-like covers – they are actually cover for license plate screws.  Here  are a couple of pics:

One cap on and one off.

 

Both caps on, held in place with a touch of easily removed household rubber silicon glue

 

Thanks for reading.

Tim

Five vehicles from Ron Pratte’s collection set to cross the block at Barrett-Jackson – Hemmings.com


Tucker #1043. Photos courtesy Barrett-Jackson

The big Scottsdale auction week is finally here, now with six companies set to to drop the hammer on literally thousands of collector cars in a mere handful of days. In typical fashion, Barrett-Jackson was the first to usher cars through the stage lights, and it’s here where we’ve been alerted to the probable sale of this 1948 Tucker (chassis #1043) currently owned by none other than noted Barrett-Jackson attendee and enthusiastic car collector Ron Pratte.

Specific details about the Tucker are lacking, other than mention of its restoration, on Barrett-Jackson’s auction description. And we use the phrase “probable sale” simply because unlike most of the lots at B-J, the Tucker is listed as having an undisclosed reserve. That said, Mike Schutta of the Tucker Historical Foundation, provided more insight.

This car is very nice and most Tucker fans are keeping a close eye on this auction to see if it will set a new record price for a Tucker. The current record is $1,127,500 paid for Tucker #1045 about 18 months ago. This Tucker is in much better condition.

An interesting tidbit is that Tucker #1043 was used as part of an advertising scheme for a golf driving range in a western suburb of Chicago back in the ’50s. It was painted Tropical Rose and Snowshoe White to match the driving range buildings.

While surfing through the Barrett-Jackson website for more information on the Tucker, we stumbled upon four other Ron Pratte-owned vehicles that will also be offered at Westworld during the weekend, beginning with the car pictured above: the 1947 Bentley Mark VI with coachwork by Franay. The Bentley was last offered for sale by Barrett-Jackson – at no reserve – at their 2006 Palm Beach auction, where the hammer fell at $1,728,000 (including buyer’s premium). At that sale, details of the Bentley were as follows:

4.5 Liter Inline 6 with a four-speed. Coachbuilt by Franay. Magnificent restoration to Pebble Beach Concours d’Elegance winning standards. This is the first major winning Concours d’Elegance car after WWII. Winning the first two major Concours in 1948, back-to-back, on the 12th of June at Enghien and the 17th of June at Bois de Boulogne. Mr. Gudol, the original owner and visionary of the Franay, was an industrialist whose sole purpose was to prove to the world that France was not only back from the rigors of war, but ready to reassert its dominance of haute couture and automotive design elegance. The awards the Franay has won over the decades is proof of his timeless vision. Mr. Gudol, in his wisdom, continued to enhance and advance the performance capacity and design elements of the Franay to push the envelope of an ever improving competitive edge in Concours d’Elegance competition. Mr. Gary Wales, who has shepherded the Franay through over 50 major awards and honors since 1990, has scaled back the number of public appearances so that the car is currently eligible for any and all Concours d’Elegance events.

Like the Tucker, the Franay Bentley touts an undisclosed reserve.

Then there’s Pratte’s 1957 De Soto Adventurer convertible, again with an undisclosed reserve. Oft-repeated generic De Soto history aside, specific details provided by Barrett-Jackson state:

Powered by the famous 345/345hp Hemi V-8 with dual quads, an automatic transmission, push-button shifter on dash, and independent torsion bar front suspension. With the division’s top Hemi V-8 under the hood, the Adventurer was an early muscle car with a set of the most aesthetically pleasing tail fins ever seen on virtually any car.

The only two cars listed by Pratte without a reserve are this pair of 2007 Shelby GT500s, which are to be sold as a pair. Details per the auction site are identical for both Shelbys:

In January 2006 Ron Pratte bought the Ford Motor Company’s newest car, a 2007 Ford Shelby GT500 VIN 00001 that benefited Carroll Shelby’s Children’s Foundation. In the past, Ford reserved the first fifty cars produced for Ford family members and senior executives or by other people on a selective list. Ford was so grateful to Ron for his generosity, they offered him the opportunity to buy two more, VIN 00002 and VIN 00005. While Ron is keeping VIN 00001, he is selling the orange Coupe and matching convertible as a pair. The successful bidder will get both cars for one price. These cars are special in other ways as well, as part of the purchase of VIN 00001 was a trip to the Flat Rock assembly plant where these legendary cars are manufactured. At the end of the tour of the assembly plant, Ron was presented with the keys to VIN 00001, VIN 00002 and VIN 00005 by Carroll Shelby and Carroll autographed all three cars for Ron. Along with his cars were three other 2007 Shelby GT 5000′s, for Carroll Shelby, Steve Davis and Gary Bennett. Ron then threw Ford a curve and said he didn’t want any of these cars shipped by rail to the owners, he wanted them trucked, enclosed, to his facility in Chandler, Arizona, bypassing the traditional dealer delivery and inspections. All of the cars, including Carroll’s personal GT 500, were delivered to the respective owner this way. This is a unique opportunity to own two pieces of Shelby and Ford history.

Barrett-Jackson’s Scottsdale auction started Sunday and will run through this weekend. For more information, visit Barrett-Jackson.com.

I personally love the De Soto.
 
Thanks for reading.
Tim

1975 VW Bug Restro 1

It’s been a while since I’ve provided an update on the restoration of the 1975 fuel injected VW bug that I’m project managing for a former workmate.  So I thought I’d post of some details andsome pics.

The car is called a “Standard” – that doesn’t mean a manual shift (although it is a manual 3 speed), that means the most stripped down, no optioned, VW you could purchase.  I’m talking interior door panels with a thin covering of fake leather over (almost as thin) cardboard. Rubber floor coverings (I wouldn’t even call them mats!!!), a headliner, cloth seats were the total of trim in side.  There was no upholstery covering the rest of the interior – just painted metal.  It did have an AM radio – which was replaced it a JVC.

Not much to the door panel.

 

Headliner and sun visors are about the only other upholstery, the rest is painted red like you see here.

 

In fact importation of these striped down models was halted shortly after about 100 here shipped to the US in 1975. This is one of the 100 allowed in.  Pretty cool story.

This particular car belongs to June Yang and she purchased the car, brand new, while attending college in Iowa.  The car lived in Iowa it’s entire life (until now) and it show’s signs of every winter too.  The car had been stored for years and suffers from a severe case of rust and by all accounts shouldn’t able to sit up-right on four tires.

But like many folks, who love their V-dubs, June has a lot of memories tied to the rusted fenders, college, and other life milestones. So when she moved to Tucson, Az she thought of bring the Bug with her.  She was advised that the car was not safe to drive down the driveway much less the block and certainly not 1/2 way across country!!!  And that was an
understatement!!!!!

I met June when she came to work at the same establishment where I labored.  I’m not a closet car guy and a visit to my office at that time it was pretty clear.  Eventually she asked about having the car fixed and her desire to have it join her in Az was discussed and although I had no idea the exact condition.  I helped arrange transportation to Tucson.

The goal was to get it here to some place that could get the car running (it wouldn’t start and brakes hadn’t been serviced in some time). In run condition, the thought was we could then running it around (save a few $$) to the various places I had planned to do the work.  Unfortunately even running it wasn’t going to be safe enough to drive.  See here<<<<>>>>

The transport had one bump when the driver’s truck died en route.  The company immediately arranged for a local company to pick it up and finish the trip. I believe June called them every hour for updates.  Eventually, the car showed up at my favorite auto repair shop and Tim Sisk gave me a call to come look the car over.

These pictures don’t nearly capture the condition this car, frankly I was taken back as well and I grew up driving a 1930-ish Ford stripped down pick-up that served as an alternate tractor on my grandfather farm, in upstate New York – no floor boards and the like.  This VW was nearly eaten alive by oxidation.

 

Rust 1

Rust 2

 

And here's a little side view.

 

See the highlighted area? It's not attached. It should be. It holds the body to the frame!!

 

So are you saying WHAAAATTT????    Pretty much the standard response… but don’t fret….there’s a plan!!!

More coming up.

Thanks for reading.

Corvette Club steps up and honors a returning soldier | Hemmings Blog: Classic and collectible cars and parts

Read it on Hemmings Blog. 

Corvette Club steps up and honors a returning soldier | Hemmings Blog: Classic and collectible cars and parts.

 Great Story.

Beautiful 1980 Vette Great job done by Classic Glass Corvette Club of Marietta, Georgia

 

Corvette Club steps up and honors a returning soldier | Hemmings Blog: Classic and collectible cars and parts.

Happy Birthday Mr. Shelby

Thanks for all your ingenuity. Enjoy your day.

Mr. Shelby

His legacy

Thanks for reading.

Tim

The rebuilding of a Ford 3 speed manual Transmission

As I mentioned in an earlier post, I’m going to rebuild the old 3 speed transmission that I took out of my ’70 Mustang coup and I’ll do it in stages (average guy, average time to spend on a project…especially one that isn’t going to benefit my cars).  The rebuild kit is on it’s way.

This the first time I’ve attempted this, so who knows how it’s going to go.

First I’m going to give myself a transmission anatomy lesson, which I’ll share here.

In the mean time here are couple of videos.

[vodpod id=Video.15939015&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0086.mp4]

[vodpod id=Video.15939022&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0085.mp4]

[vodpod id=Video.15751050&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FMVI_9345.mp4]

Exciting..HuH?

Thanks for reading

Tim

Driving Difference

Since I’ve gotten the 4 speed ( T-10 from 1967 Shelby) in the Mustang, I’ve been driving it a lot more.  I’m surprised at how much of an improvement it has made in the drive ability.  Of course there is more power going to the ground which is remarkable and the RPMs are put to much better used.  The original three speed top out pretty quickly and nothing left but engine noise.

Of course with more power hitting the ground, my current tires (wide and hard) tend to grip a lot less and spinning them through 2nd gear is common.  That will required some new, softer tread before long.

After driving the Mustang a few days in a row, I took the Vette to work.  Now you would expect there to be a difference, especially with the 120 hp disparagement in power  the Vette (about 420) and the Stang (about 300 – maybe a bit less) , but what I notice is how both cars arrive at top speed.

Both car’s like to launch, but the Vette does so with much less rear hunching then the Mustang.  The Vette feels lighter as it gets up to power – less down force on the road.  The Mustang is much different.  You can feel it, feeling the road.  I can actually feel the power longer and deeper in the Mustang as it move on up through the RMPs and the gears.

I think I’m ready to at a tach to the Mustang, I need to see the RPMs it’s turning out and then I’m going to have it dyno’ed.  It will be a good baseline before I get the  351 CJ head and intake installed.

Thanks for reading

Tim

 

Valiants Down-Under

I enjoy the off-beat (as in not in the top 20 collectible) cars.  And they really have some of those ‘down-under”.  I grabbed this from this site

I  LOVE Valiant cars!

Found this one in Yarraville, Melbourne.

 Thanks for Reading

Tim

The Cars of Cuba: Photos and stories from Havana

I hope you can view this article.  Has some great cars – although the saying “keep the shiny side up”  doesn’t really translate – these just don’t have one.

I’d love to spend time wandering around Cuba, just to look at the cars.

The Cars of Cuba: Photos and stories from Havana.

This is from Hagerty Insurance Company.

Thanks for reading.

Tim

Alice Cooper’s Classic Ford Mustang To Cross Barrett-Jackson Auction

I’m hoping to get a few shots of it when I’m there.
Posted by on January 2, 2012 – 0 Comments

alice cooper

Any Alice Cooper fans out there? If you worship Mr. Cooper plus love classic ‘Stangs, the best of both worlds is about to cross the auction block at Barrett-Jackson this month. A red 1965 classic Ford Mustang with a 4-speed automatic 289 V-8 and only 35,915 miles. Supposedly fit his golf clubs in the trunk perfectly!

Here is an opportunity to own Alice Cooper’s 1965 Ford Mustang fastback with 35,915 original miles. Alice used this car for the Golf courses, going to the mall and dinner from time to time. We will include a set of Calloway golf clubs for the new owner of the car.


Source: [Barrett-Jackson]