Barrett Jackson Recap Part I

Well once again I attempted to do some “nearly live” postings from the “big show” but my recent move to my own a new domain had some glitches and well  my Android phones battery didn’t hold up.

But there were a lot cars and a ton of other sites and activity.

One of which was driving the 2013 5.0 Mustang with 412 hp!!!

So grab the RSS feed or sign up for emails because for the next few blog entries I’m going to ‘expound’ on some of my highlights.

Enjoy.

Tim

Mustang010809

 

Barrett-Jackson Car Auction – $4.6 Million

So what  is Black, transports a rodent and is worth 4.6 Million Dollars?

That would be a Ford Futura converted to the  ‘BATMOBILE’.

It was standing room only when  the Batmobile  came to the stage.  It was very cool to see it in person.  Here are some photos.  I spared you the picture of the elderly lady running around in a Bat Girl outfit.  Some things you just can’t “unsee”.

Thanks for reading.  More coming up.

Tim

 

Barrett Jackson – Mopar video. Turn up the volume

In the staging area.

More coming up!!!

Tim

2014 Corvette Stingray

So by  now you’ve heard and mostly seen the new C7 Corvette for 2014.

I don’t think there’s been a more redesigned Vette since the 1984 C4.

5 Driving modes

7 Speed Manual transmission

99 lbs lighter than the C6

Direct Injection with push-rods in a small block

And Camaro taillights!!!

Here are some pics:

2014-Chevrolet-Corvette-6.2L-LT1-engine-623x389 2014-corvette-stingray-01 2014 Chevrolet Corvette Stingray 2014 Chevrolet Corvette Stingray

Tell me what you like and what you don’t!!

Tim

A Great Car Collection and Super Cool Garage!!

With Barrett Jackson Auction just a few days way.  Take a look at Craig Jackson’s Garage  in Paradise Valley, AZ

 

Very cool

Tim

 

 

 

 

SEMA offers up to $5,000 in automotive scholarships for 2013 | Hemmings Blog: Classic and collectible cars and parts

SEMA offers up to $5,000 in automotive scholarships for 2013 | Hemmings Blog: Classic and collectible cars and parts.

Hot Rod Neighborhood

Tell me what you know about hot rods?

Well they’re cool!  Yes, that’s true.  But what makes them cool?

The shine of the chrome, the rumble of the engine, the ear-splitting sound of no headers that lead to the high-pitched sound of rubber over coming friction.  Yup all that too!!

If you are an owner, working on them make it pretty cool too, despite the mess.

I was reading an article in GoodGuys magazine where the writer (a hot rodder) would love to greet new neighbors by revving his hot rod and laying down some rubber in front of their house.  In the course of  article he matured a bit which improved his standing with the neighbors.

I’m glad he did because frankly he wasn’t doing the hobby of hot rodding or muscle car ownership any favors.  It reflects poorly on us and makes it harder to protect the ability to pursue the hobby at home.  There’s no reason to be a “Richard Cranium” (I have friends whose kids read this)!!!!

Let me share a story from my own neighborhood.

A few years back a guy moved in next door who was a DPS (State Trooper).  I was glad to see that since I’m a former cop and I was “DELIGHTED” when a couple of days later a bright yellow 1962 Chevy II drag car showed up on a trailer outside his house.  It was all I could do to keep from running over there and take it off the trailer for him.  The car was beautiful.  And the first day he fired it up – windows rattled 1/4 mile away.  It was awesome!!!

After a couple of months the thrill ran out. The owner would move the car out of his garage on to the driveway and running for long periods of time – while tuning and most of that was a the same decibel level you get at the drag strip that’s just 7 miles way (you can actually hear it on a calm day in my front yard).  As much as I enjoy cars, especially those that are fast and loud, there became a point where I starting to think my other neighbors were right to complain.

Now listen, my Mustang is pretty loud, and I’m sure a few of my neighbors are bothered slightly – but this guy made me look like a saint!!!

But, I think the tipping point for me was when he and a buddy (I would loved to help – in fact it might have been better if I did…the ‘why’ is coming up) decided to tear down that monster power plant in the driveway.  “Well what of it?” You might be tempted to ask.  Well they did so while allowing a wide stream of all the fluids (oil, antifreeze, fuel) to run down the driveway (driveway has a steep angle) into and across the street (which is mid-way a slope) and down the gutter on the opposite side.  It traveled about some distance passing about 4 house/driveways.  Needless to say neighborhood cars’ tires spread it further down the street and into their respective driveways.

Now, I like working on my cars and the “why” it would have been better if I had helped is the fact that I have all the containers I personally use to capture, hold and properly dispose of these fluids.  Oh, I’ve had my share of spills, but nothing as offensive as their failure to even attempt to stem the flow, much less clean it up.

Adding insult to injury, they left that big block GM motor open and dripping for two more days.

This was of course unacceptable to most on the street and as a car guy, I was horrible disappointed that a follow enthusiast had such disregard for those around him and the environment.  It wasn’t much after that I saw the car on the trailer and a moving van followed.

Now I know that owning a hot rod or muscle car isn’t perfectly clean but there is no excuse for such behavior.

Do what you can to protect the environment, and the image of the hobby.  Don’t be a Richard Cranium and ruin it for the rest of us.

So be reasonable and responsible!!!

1. Keep the mess contained to your garage or property.

2. Capture your fluids in the proper containers and have it disposed of properly.  Make friends with the local auto repair places and they may even take it off your hands.  Even auto parts stores will help recycle some fluids.

3.  If you can’t afford the containers or to have the fluids disposed of, then maybe you should have the car.

4.  Don’t run your car at inconsiderate hours and for extended periods. (I try very hard to warm up the Mustang and get out of the housing development a soon a possible.  I also do what tune up and testing as necessary but if I have to upon it up I’ll take to outside housing area to do so.

Thanks for reading.

Tim

Model Cars, or How I Spent My Winter.

I happen to live where the weather is nice nearly year round.  You could almost always work on your car.  But even here in Southern Arizona, we get a cold spells….HEY…36 degree (morning temperature) is cold!!!!

Ok…enough whining. There are many of you that live a bit North of here and driveing much less working on your project car  is more like Man vs. Wild in the Antarctic – I know I’ve lived in Nebraska and up-state (way up) New York.

So one cool way to spend the winter it collecting model cars (actually you can do that any time).  I wrote a piece about 3 years ago (Yikes I’ve been writing this blog for that long!!!) about collecting model cars.  Here  a link:  When You Just have to have that Classic/Muscle Car?…Think Small!!!!        http://wp.me/p2YxYx-1rV

As you can see (compared to 3 years ago) my collection has grown a bit.

The Mustangs

The Mustangs

The Vettes

The Vettes

Few others

Few others

More of the collection.

More of the collection.

These are only a few that I have room to display. Of course these were all purchased and unless you are big in to dusting, this isn’t really going to help those winter months speed by.

But building your own can be rewarding.  Here are a couple I have on deck for building.

This is a 1963 model kit of a Stutz Bearcat and a Model T

This is a 1963 model kit of a Stutz Bearcat and a Model T

IMAG1725 IMAG1726 IMAG1727 IMAG1728

The Stutz model pieces are not there, but yes I’m gong to but the Model T together.

After that I have this one coming up:

1930 Packard.  This is a 1960's model - the original box is long gone

1930 Packard. This is a 1960’s model – the original box is long gone

IMAG1731 What am I working on now?

How about an Edsel?  Yup love those cars.

Here’s the body in the first stage of painting:

Edsel in paint

Edsel in paint

This is an experiment.  It’s the first model car I’ve painted by spraying on the paint.  This is the first coat and it will be sanded and re-sprayed.    I want this two toned with the rear quarter panel inserts will be black or white.  So I experimented with some liquid masking that my wife uses when she is doing her rendering.

 

Art Masking Liquid

Art Masking Liquid

This actually worked very well.  After it’s applied it rubberizes  and protects the area from paint spray.  It comes right off when you are done.  I used a pencil eraser (exactly what my wife uses on her hand rendered drawings and I used a tooth pick to get around the lettering.

So spend you winter building a classic, or a hot rod, or a muscle car!

Thanks for reading.

Tim

 

 

 

Bill Mitchell’s (and Elvis’ too) – The Truth About Cars » Speedys

Bill Mitchell’s (and Elvis’ too) – The Truth About Cars » Speedys.

img_0317b-550x392

Speedy’s blog has a lot of information.  Could use a few pics but a lot of good info.

Tim

Experimental Corvette – SS Video MAYBE THE C7!!!

Ok…this has nothing to do with the C7, but I thought I’d start the 9,547th rumor!!!

This IS a very interesting video.

283 engine making over 300 HP!!!!  Inboard brakes!!!!  ONLY 1800 lbs!!!

Remember – “Assembled” in America is NOT the same as “Made” in America.

Thanks for reading.

Tim