In two months I will have been writing this blog for 1 year and I have enjoy every minute of it.
When you blog like I do, to share a specific area of interest, you are always trying to increase readership. Now if this were a commercial enterprise for me, then increasing my readership would be Job One. (Come on, which car company’s slogan was that? If Ford jumped into your head that would be correct.) However, it is not, but still I’m always searching for a way to make this blog a place more and more folks want to view.
There are a lots of ways to do that, none of them huge as far as bringing in the masses and some aren’t inexpensive and others are labor intensive. (Guess which one I do…oh…yeah…cheap and labor intensive…Average Guy….say it!!!!……Average Budget!!) While searching for ideas or processes I could take advantage of, I ran across some helpful hints. One in particular makes sense, namely, keeping the site updated regularly. This suggestion dictated that it be daily, which is really a good idea. However, the method it promoted was to jam the blog with other folks news feeds, articles and automatic updates from outside sources.
I thought about this a bit and I tooled around the web and looked at commercial blogs and forums and I realized that everyone had read this particular tip and employed it. And I thought, I just don’t see the point. The blog is no longer the owners writings, but really just a reorganization of things floating around on the web. Nope, not for me.
I still think keeping up the daily effort is the right way to go, but I can’t do it in that manner.
Although I do pop on videos that I think are cool and maybe a link to a forum or another blog, I’m going to keep the core of this blog full of original material, meaning my own scribblings and occasionally notes from the readership.
The life’s blood of a blog run like I run this one, are comments and readers. So drop me a note, ask a question, or give me a suggestion ( I do requests).
10/12/50 – Kaiser-Fraizer built their 500,000th car – 4 years later they opened up car manufacturing in South America.
1950 Kaiser-Frazers
10/13/1902 – Packard Motor Car Co was formed out of the old Ohio Automobile.
1902 Packard Run-About
10/15/24 – The original Mr. Government Auto Company Bailout. Mr.Lee Iacocca was born this date. If that’s all you remember him for, turn your car lover card…this guy rocked it in the car world!!!! This might change your mind…yea…the Mustang was his baby too.
How ya like him now???!!!!!
And now for the new arrivals!!!
10/14/65 – the Oldsmobile Toronado – a friend of my had one of these when I was in college back in the late 1970’s. It was my first awareness of a front wheel drive car.
1966 Toronado - Kool factor of 8.5 out of 10.
And one of my favorites
10/16/58 the Chevy El Camino arrives. Now I’m big fan of those fins!!! These also spawned the GMC Sprint and a few other variations.
Some of you know I don’t just write this blog, but participate on other forums as well.
For a little while now, I’ve been writing bi-monthly articles for www.racinginamerica.com site.
Here is some info on the goals of the organization. No you don’t have to donate, but it is tax deductible.
Henry Ford Museum
This section of our website contains information and resources for anyone who might want to better understand this fascinating and complex sport.
Automobile racing is exciting and colorful, and those same qualities make it a stimulating and enticing subject; also conducive to developing knowledge and skills.
Our objective here is to provide both the motivation and the resources for further exploration and education.
The content here will continue to grow as time goes on. It will include more in-depth features on the history, people and innovations of American auto racing. We also will present practical applications of math, physics and science in racing, which provide career opportunities in fields that include design, engineering and a variety of technologies. All this is presented in a way that’s designed to spark interest and stimulate a desire to learn more.
Check in here often to find new opportunities and resources.
As a starting point, we offer these two downloadable Educator DigiKits in pdf format:
Science, Life Skills and Innovations in American Automobile Racing Educator DigiKit Teacher Guide and Unit Plan for grades 3-8
Physics, Technology and Engineering in Automobile Racing Educator DigiKit Teacher Guide and Unit Plan for grades 9-12
9/26/1967 Everyone loves this car AMC’s Javelin the car was in the public’s hands by 1968. I loved the body style.
1968 Javelin
10/1/1908 – Mr. Ford began selling is Model T
Model T Ford – Rag Top
(they were all convertibles!!!…just saying!!!)
Oh.. you’ll like this one.
10/2/1959 – Chevy introduces the Corvair. Believe it or not I’ve seen some of the sale footage and they treated it like a jeep. Chevy had drivers drive up embankment, up and down streams with water over the tires. This gave Ford a scare but it wasn’t until they could put together the Mustang did they really have an answer.
If you are work on your older cars engine, there are a good many tricks that you can use save a couple bucks and gain a little horsepower.
This one is an oldie but a good.
Have your intake valves back cut, you’ll get a similar boost as if you use high lift rocker arms or cam.
The procedure is best done by a qualified machinist. So while you have your engine apart and laying all around our garage on pieces of cardboard (come…you know that’s what happens!!!) have him take a little off the port side of your intake valves. This creates the same effect as an earlier opening a later closing action like just a like a the addition of a an upgrade cam. The lighter valve means less spring pressure is required to control the valve at higher rmps.
A 30 degree cut is what they do on vortex engines.
The backcut is at the edge of the normal valve cut.
Yes I’m playing catch up with these. I’ll have another engine series coming up. Enjoy.
9/19/1970 – The Pinto debuted
1970 Pinto
9/21/1895 Duryea Motor Wagon Company was created. One of the first companies in the US to build gas powered cars. Their first was the one-cylinder “Ladies Phaeton”.
a one-cylinder "Ladies Phaeton"
9/23/1969 – Here’s a biggie….the debut of the Dodge Challenger.
1969 Challenger (this is the TA)
9/24/1909 Virgil Exner was born in Ann Arbor, Mi Who? Oh..you didn’t just ask that!?!?!?! Car designer for Chevy, Studebaker and Chrysler.
One thing I really hate is a leaky car. I don’t like it when stuff leaks inside the car and I don’t like it when stuff leaks out of the car.
I have a friend that alway says…”Hey…old cars leak. That’s just what they do.” To this I normally just respond with “Yeah…I guess so.” I say this because he has pride in his work he does on his cars and I’m not going to poke at him about it.
What I want to say is “Bullstuff!!!!” Not this day in age, there all kinds of reproduction parts and hoses that can be molded and even entire businesses that make custom hoses. If it’s a gasket that’s leaking you can make your own, there’s all kind of gasket material on the market.
If you remember back a bunch of post ago, you may recall my power steering issue with my C4 Vette. Oh…yes…my poor old vette (which now has a new home), leaking everywhere!!!!. I hated that, but it was all fixable, right down to having a place in town customize a power steering hose ( it didn’t actually get that far, the oddly shaped hose turned out to not be the issue.).
The reality is that chasing down a leak is sometimes difficult, almost always time-consuming and the likelihood that it will be expensive is high. So, no old cars don’t have to leak.
What old cars do do (that’s just as funny to type as it is to say) is vibrate. My ’70 Mustang is mostly stock parts, with the exception of polyurethane motor mounts, and it will shake stuff loose, is it a pretty raw machine. A good portion of leaks can be attributed to that alone.
A few weeks ago, I notice a dime sized dot of oil in my driveway….errrkkk….no I’m not a neat freak, my drive has spots (been meaning to get it power washed), but with my older cars I like to keep an eye out for issues. So I climbed under the car and looked around and it appeared that the leak might be from the oil plug it’s self. So I grab my 5/8 ” open end wrench and gave it a bit of a crank. Now you have to be careful, especially with the type of oil pan I have (aftermarket chrome) as it can get out of shape if you over torque the drain plug and really leak. I wiped down the pan so I could tell later on if there might be another leak.
Chrome Oil Pan and Plug
A few drives later I noticed another dime size drip. Only this time it was a bit further back. OF NOTE: My driveway is sloped, and pretty good incline at that. This causes a bit of a problem determining exactly where liquid might originate, that whole gravity thing, ya know. This drip did seem a bit further back then the last.
Again I check the oil pan and this time the oil pan gasket between the engine and the block. Nope no oil. So I go topside and start checking the valve covers. And sure enough there, there appears to be a leak in the rear of the left value cover. Not really a big deal, looks like it’ll just need new valve cover gasket, this 302 engine is wide open in the engine bay with lots of room (nothing like the 84 Vette was to get to).
Lots of room in this engine bay to work.
Valve Cover, you can see the bit of oil grunge along the bottom.
I then recalled that FelPro gaskets were used and I specifically chose the type used on drag cars, designed so that you can pop the valve covers over between heats to make adjustments. This particular set of valve covers that I purchased when restoring the car came with bolts that tighten with an allen wrench.
Screw with allen wrench (or hex wrench).
Just in case:
Allen Wrench/Hex Wrench
Hexagon end of allen wrench
So I thought…to myself (really….can you think to anyone else?) “I wonder if they are all tight?” Sure enough they were all loose. Hence the oil leak. I tightened them all down, wiped down the engine where I could reach and drove it a couple of days. No leaks!!! Now I make it a habit to check those every so often. This is BTW a good tip if you drive your muscle or vintage car.
Now the latest leak, I noticed a couple of days ago. I check the liquid laying in my drive (only about the size of a quarter) and it was power steering fluid. I’m thinking oh…NO..not again!!! I didn’t even look under the car and went straight to the computer and did a quick search for new power steering parts for my 70 Mustang. What I found wasn’t horrible, as in, well no retirement for me, got to fix up this ‘stang, but bad enough price wise to see if it was repairable.
So I crawled under the Mustang (or hunk of iron, as my wife calls it…or maybe she was calling me the hunk :^ ) and took a look. Yup, there was a leak but it appeared to be coming from the flared steel hose fitting going into the power steering unit.
Steel hose and the leaky mess.
A couple turns with a 1/2″ open end wrench and again wiped down area. I keep checking back to see if any new leaks appear.
I can say… right now…. that my 70 Mustang doesn’t leak….I don’t think!!!
So now I stand corrected, sort of. Old car do leak, hey new cars leak!! However, they don’t have to stay that way.
Tips:
1. Check under your muscle or vintage car for any liquid (hey…it’s ok if is just water from you AC..usually) on a regular basis.
2. Get under the hood and after your ooo’ss and aaahhh’s at your magnificent creation, tight things up. ( I always ooo and aaahhh!!!)
3. Get the car up in the air “”SAFELY”” and check the fittings you can’t see or reach from the top side.
4. Chase down the leaks and clean the area to make checking for a continued leak easier.
