I recently did some work on my power steering system found this tool to be handy.
There is a lot of fluid in the power steering reservoir. As soon as you release the hoses, it’s going to poor all over the front of your engine and then on the ground. An oil change tub will help keep it off the garage floor, no staining and no tracking it around. However, it will still run down the engine.
So, I used a turkey baster. EEEERRRKKK…(yeah it’s in caps!!!) Do not put it back in the kitchen when you’re done….NO…NO..NO….In fact if you are smart, ask first!!! I did and I was surprised to hear “Sure, but you’ll have to purchase a replacement.” For a minute I thought….well that’ll come out of my car budget….and I thought…I wonder if I can clean it up…and…ummm…(kidding of course). It worked great and I just have to purchase one…but not until Thanksgiving!!!! $10 bucks says..I’ll forget and have to run out on Thanksgiving and stand in line for 1.25 hours, if I can find one at all.
BTW – I recommend “Pampered Chef” brand for power steering fluid removal!!!!
If you searched and found or followed my posts on restoring the dash-board of my ’70 Mustang, then you might recall my planning/scheduling issues.
As I was taking the old dash pad off, I realized that I hadn’t order the plastic pillar molding. When I finally called a few Mustang parts supplies places I found them all to be out of stock and they had to put them on back order. They did finally come in and it’s taken me a bit to actually find the time to replace them. Well, this long 4th of July week, I’m at least going to get started. (I have also do the valve cover gaskets as well.)
So here again is what I’m replacing:
Yeah..had to get creative to keep them on.
Pretty?
Now the new molding comes in any color you want as long as that’s black. You’ll need to paint the proper color. If you have the specs for you car you’ll easily find the interior color and places like National Parts Depot or Mustang’s Unlimited have the paint for the job. I had to do this with a replacement armrest. Which was horrible – replicas all came square and my Mustang’s armrests are rounded and have the overstuffed look like a leather sofa or overstuffed chair. (I ended up pick up a use one in good shape and painted that..I think it was tan originally.)
Oh..sorry…I wandered!!!
The first think you have to do is prepare the plastic for holding paint. The guys at National Parts Depot recommend SEM 38353 Plastic/Leather Prep. I’ve used it and it seems to do the trick. Pretty simple….Spray surface, pay attention to recessed areas, wipe with clean cloth. Use some gloves if you have office worker hands and put out the cigar while you using this stuff.
SEM 38353 Plastic/Leather Prep
Sticking with the SEM brand I purchased a can of Universal Color Coat. I used this paint on the aforementioned armrest and it lives up to the “Flexible Coating” label. My Mustang’s interior is VP-15945 Vermillion.
6/14/1832 – Nicolaus Otto was born in Germany…”Who?” He invented the gas motor engine. An engineer and experimenter, Nicolaus Otto invented the first practical alternative to the steam engine in 1876 — the first four-stroke internal combustion engine. He called it the “Otto Cycle Engine,” and as soon as he had completed his engine, he built it into a motorcycle.
The Otto Motor powered Cycle
6/16/1903 – The BIGGIE….Ford Motor Company was established. On the same day in 1953 Ford introduced the power steering. (Two for the price of one)
Also on 6/16/1896 Jean Peugeot was born in Paris. Founder of Peugeot the auto maker. The family began with coffee mills and bicycles and then cars.
6/18/1943 Tom Gale was born in Michigan, Flint to be more exact. His Dad was a designer for Buick and his grandfather worked the assembly for Buick. Guess where he went to work when he finished school….nope….Chrysler.. Gale became head of design in 1985. He previously worked on the some of the iconic cars such as the E-bodies-Barracuda and Challenger and was a major contributor to the Chrysler Portofino concept car.
1987-Chrysler-Portofinow Concept Car
6/19/1947 the Tucker shows up in Chicago.
The Tucker-Torpedo - I love these cars!!!!
And on the same day, 1969 GM produced the 4 millionth Cadillac.
This isn't actually "THE" 4 Millionth Caddy..but you get the idea.
7/7/1928 First Plymouth is made, some research suggest that it was actually built on June 11, 1928. It had engineering code (or model) Q and had a 4 cylinder engine. Check out the video on YouTube. http://www.youtube.com/watch?v=hGfwjTI1ahA
6/10/1951 A Jaguar wins the 24 hours Le Mans – it was a C-type version of XK120. Here are a couple pics:
Jaguar at a race
XK 120 C
C Type
6/10/1927 – The Graham boys purchased what was Paige_Detroit Motor Cars. The Grahams started out as farmers and glass bottle makers. One of the brothers invented a rear axle that would allow converting Ford car platforms in to light duty trucks. Oh they are still in business – owning/running Madison Square Gardens and hosting sporting events.
Graham-Paige auto
6/11/1955 Horrific crash at the 24 Hours of Le Mans. Here are the details from History.com
Prior to the race, Levegh complained that the course was too narrow near the pit-stop area and the grandstand. This observation proved prescient. As Levegh was racing for the lead near the pit-stop area, he swerved to avoid fellow racer Mike Hawthorn s Jaguar as it moved toward the pits. Levegh s car, going about 150 miles per hour, came up too fast on Lance Macklin s Austin-Healey and was catapulted upward. The car crashed into the grandstand and its exploding parts went straight into the crowd. Levegh and more than 80 spectators, packed into the grandstand, lost their lives in the fiery crash.
6/12/1954 – Packard offers the first tubeless tires.
So restoring or modifying a car will have hurdles, no way around it; face ’em and deal with ’em. I think one could list them for days and still not cover them all. But let me cover the psychological ones that I’ve encountered. (Besides the dual persona necessary to own and own up to owning a Ford and a Chevy….oh, don’t worry, you read the multiples talk to one other…right?…whatever you say….Yes, they won’t have to read that again…we promise.)
Again, I’m sure there are many, but one by one, I’ll list mine and discuss. It’ll be good for us…I mean..me!!!
Most of these stem from always longing for that special car and then finally getting one. Now, if you pick up a “project” car, then chances are you aren’t going to get where I am until at least you have it running, driven it around a while, and developed that special bond. You know the bond I’m talking about, where you’ll do anything to spend time with it. Like, take the long way to work even though you might be a couple of minutes late or the “Sure honey, I don’t mind running to the store for you for the 14th time today. ” I don’t mind missing a little of the game.” That bond.
I bought both of my cars in very good to excellent condition. The Mustang was my almost daily driver, even when it was just a 6 banger, and the Vette replaced my Celica as the daily driver..by design. So, I developed the bond pretty quickly.
This bond drives “fear”, yes, I said it…”FEAR”. Fear that something might happen to the car, a crazy fellow driver, a knucklehead in a parking lot, the old guy that leaves his shopping cart in the parking spot next to you on a windy day. All truly horrible, truly.
But there is one thing worse: breaking the beloved thing yourself. It’s like accidentally stepping on your pet’s paw or knocking your child down while playing basketball. It can actually make you feel ill…right? Are you all following me? CAN YOU DIG IT? (from the movie Warriors).
Remember, I’m the Average Guy. I have a basic skill set; you won’t find me (Yet) pulling the tearing down an entire working engine. At least not alone and even then with much trepidation. I can’t image being deprived of driving my dream due to circumstances within my control; that’s just NUTS!!!!!
If you are on a limited budget, this multiplies the fear 120 fold…AT LEAST. You break it….you have to wait to get it fixed. Then your significant other is going to AT LEAST mention how much it might cost (over and over and over). “The commentary in this blog relates to a fictitious individual; any similarities or assumed similarities that might point to an actual person are merely coincidental and not intended to be projected onto my very understanding spouse.” (Love you..Honey!!!) (pst..how was that…pretty good, huh?..Yeah, that should cover my butt…JUST fine. Of course we have a very nice couch!!!)
For this evenings writing I thought I’d give you a run down on my Mustang.
WARNING: Caution Chevy owners you are going to hear Ford stuff!!!! This blogger does have a split personality.. Ford vs. GM. I catch a lot of <insert bad word> from my Corvette club and the same from the Mustang guys. I’m learning to live with a split persona..”No you’re not!!!”…”Yes I am!!!!” “HEY guys…not NOW…they’ll notice.” “Fine!!!!!”….”He started it!!!!” ENOUGH!!!
Sorry folks, must have missed my medication this afternoon. Sooooooooooo..oh…yeah…I remember.
I purchased the Mustang about 4 years ago from a family in Glendale, Az., for $6000.00 cash. They were the original owners and purchased it in Phoenix, Az and handed it down their daughter. She is the one I purchase it from. So, I am the 3rd owner. The car was in pretty good shape but had over 173K miles. Engine was a 250 straight 6. No power. It had dealer installed AC and when you turned that on..forget ’bout it (insert heavy NY accent) you could walk faster. Ok, not really the 250 was rated at about 155 hp but it had 10:1 (or 9:1) compression and for some odd reason they stuck a single barrel carb on it. “What?” you say….I say yup..it was a Webber. It also sported (and still does) a 3 speed manual transmission mounted on the floor. The interior was recently re-done and in good shape, except for the dash. All the gauges worked. The original radio was replaced with a crappy first generation cd changer (located in the trunk…pretty convenient).
Here is a program note. When see the word “TIP” you’ll know that this is something you might want to jot down.
I’m going to give you the details for how the Mustang came “configured” when it was ordered. Later on I’ll give you the list of modifications and if anyone likes (comments…good or bad…are welcome and questions as well) I’ll pass on my web site link and you can see some before and after pictures.
Get ready here comes the first programming note.
TIP: I love the history of a thing. Sometimes, to me, the history is more important than the actual value of the object. As far as cars go documentation will increase the value, sometimes considerably. So where’s the tip? Ok….just for being patient I’ll give everyone a double dose. Keep the paperwork!!!! If you are buying a car ask for any and all paper. Some people keep everything, you’d be surprised. My Mustang came with a folder full. Anything major done with this car was in the paper work. There the second dose. Find a registry for the car make and model. A registry is here someone or some organization contacts owners or is contacted by owners and the list all the details of their particular cars. The individual or organization often create databases and store all the collected information. They are a fountain of information for you to use when getting the details, similar to what you’ll see below in a second, for your ride.
TIP: (No extra charge for 2 tips in a row!!) Ford lovers check this out. There is place in El Mirage, AZ called Marti Auto Works. They own the rights to the Ford databases and records prior to 1974 (some models up to 1989). These guys have everything..I mean everything. Give them the VIN number and they’ll pile on the data (it’s not free but very reasonable). They are authorized by Ford to reproduce window stickers and Protecto Plates (identification plates that go on the inside door jamb). I had them run the number for my ’70 coupe.
Here are some of the details:
The car sold for $2984.20 (ha…2o cents!!!) . The engine was less than the radio. TIP: Insurance companies may only insure your car for the sticker price, that is what my regular insurance company would do. Get some collector car insurance!!! We’ll cover that together in the near future.
She came with the 6 cylinder 250 IV 250, vinyl Hi-back bucket seats (Mach I seats), color-keyed carpeting, floor-mounted shift lever, Instrument gages, factory Ford color “white” color code “M”, black sidewall “belted tires” and AM radio.
(HELP: If any one knows why most people refer to their cars as “she” or “her” drop me a comment. I’d like to here some suggestions.)
It was ordered and sold from Don Sanderson Ford Inc, 5300 Grand Ave., Box 938, Glendale, AZ. It was shipped from Dearborn, MI via rail. Come on now..how cool is it to know how it was shipped?)
Kevin Marti will provide you with an “Elite Report” this includes very detailed data. I’m not kidding..right down to how many were produced exactly like yours. I won’t type it all here, I can send you the level of detail if you drop me a comment and ask for it. Here’s an example: 191,522 Mustangs were produced in 1970; 15, 300 had the straight 6 engine; 107 had the same seats. My car was one of 1,146 with the same paint and trim codes. It was the 58,634th Ford vehicle scheduled for production at the Dearborn plant. And here is my favorite. “Your car was actually produced on January 28, 1970 – one day behind schedule.” Cool? Way Cool!!!! Hey, she has a birthday coming up..40 years old!!!!
I think that’s enough for now. Tomorrow – a run down on the Corvette…..”OH YEAH….love GM!!!” …”So the Ford got to go first!”..”That doesn’t mean anything!!!”…”Does too!!!”….”Not!!!” I’ll take my meds tomorrow!!! Promise!!!!
I’ve had this book on the shelf for a couple of years now. It is a great reference to own. The book is by John M. Clor and it features Mustang Memorabilia, a lot of cool stuff. First thing inside the front cover is a CD entitled “Sounds of Mustang”. Yup you …
Replaces that is, boot as in shifting boot. (Were you thinking…since I just got back from the Barrett Jackson Auction.. I was considering getting rid of the Stang ? Nope..but I tell you there were a couple of cars I’d even swap for…that’s for sure!!) When the 4 speed trans got …
If you searched and found or followed my posts on restoring the dash-board of my ’70 Mustang, then you might recall my planning/scheduling issues. As I was taking the old dash pad off, I realized that I hadn’t order the plastic pillar molding. When I finally called a few Mustang parts …
The last I blogged about my Mustang I had finished up the installation of the new dash pad and replaced all the bulbs and cleaned up a few years of dust. If you recall (well you don’t have to, just go back and read the posts) I talked about planning and …
I’ve the pillar post moldings painted and ready to installed. I put on 3 coats of paint. Now I have to remove the dash pad (again) and install. That will be later this week, my Corvette is still in shop and the Mustang is my back up car. Thanks for reading more to …
Caulk another tasks down on the restoration of the Mustang. I finished up the pillar post molding last night. Here is the before: Now these were not as labor intensive as the dash-pad but here were some issues. We’ll walk through them. The removing the dash-pad was chronicled in my earlier post and that was …
