This is it. The beginning of it all. What were they making in 1901?
The top producer was the Locomobile car company with a total out put for the year 1,500 cars.
Winton was second with 700 cars.
Oldsmobile (ahh one we’ve heard of!!) was third with 425.
White came in fourth with 193.
Autocar was next with 140.
Knox was sixth with 100.
Rounding out the bottom was Packard and Stanley with 81 and 80 respectively.
This is a 1901 Winton Racer..what's the guy in the front doing?
1901 Autocar
The 1901 Autocar has a shaft-drive engine, powered with a water-cooled, two-cylinder, horizontal-opposed engine in the front of the car. The gasoline tank and battery box were under the front seat.
I was reading the other day and I came across a car manufacturer that I hadn’t heard of prior and yes it was an American car maker. The maker was Velie.
1911 Velie passenger car
Like some car manufacturers Velie started out as a carriage maker (as in horse and carriage). The owner was Willard Velie and we received his funding from this mother who was the wife of John Deer. Yes that John Deer. It’s not exactly clear if John Deer was is father, but we’ll assume it was so.
Willard created Velie Motor Vehicles Co. in 1908 and produced their first car in 1909. It was a 4 cylinder and sold 1000 units and were sold though John Deer dealerships. The 1909 and 1910 models primarily used existing engine but in 1911 build their own. In that same year the Velie car participated in the Indianapolis 500 and finished 17th out of 46.
1911 Racer
That helped keep car production was at 3,500 vehicles a year. By 1914 Velie added a six-cylinder side-valve Continental engine to the mix of power plants. and by 1918 only offered six cylinders. The car became so popular and reliable that a few folks in Louisiana name a town after the car.
In 1918 Velie won the race at Pikes Peak which helped increase production to 9000 a year cars by 1920.
In 1928 they introduced the an 8 cylinder engine a Continental straight eight and were a roll so to speak. (Not to mention their little side business for producing air planes.) However that was not to be, Willard died in late 1928 and Willard Jr. died a few months in 1929 later. That ended the Velie Motor Vehicle Co.
John Deer company bought the plant and well they sold a few tractors now and then.
It is 1922 and the car industry is moving right along. Small start-up car companies pop up here and there in the 1920’s.
Here is how they stacked up for 1922.
Top spot was Ford producing 1,147,028 cars.
Dodge was a very distant second with 152,653 car rolling off their assembly line.
Chevrolet ran in third place with 138,932 cars made.
And finish up the list were Buick with 123,152; Studebaker with 105,005; Williys-Overland with 95,410; Durant with 55,300 and finally Maxwell/Chalmers 44,811.
Total passenger cars produced were 2,274,185 with 269,991 truck being made.
Rickenbacker was a new upstart beginning production in 1922.
Durant produce a car priced at $319 . Ford reduced prices to $298.
Balloon tires were introduced.
Hey fuel gauges began being installed in dash in 1922.
1922 Durant Star - An attempt to undercut Ford's prices
Thanks for all the comments and emails on the Part 1 of the Cars You Never Heard Of.
Thought I’d follow it up with the Panther Kallista. This stems from the same article in “Classic and Sport Car” a UK publication. The article pitted pricey European cars against less expensive cars and rated them. It’s over all theme was “See you can get this close to the expensive cars, for less.”
1985 Panther Kallista
Kallista was the product of the Panther Car Company and they were built between 1980 and 1990, actually coming on the market in about 1982. The were a box chassis with an aluminum body. The engine that was first used was Fords 2.8 V6 which cranked out 2792 cc from its 12v configuration. The electronic fuel injection helped it deliver 150 hp and 159 lb ft of torque. Top speed was about 120 mph with the help of the 5 speed manual transmission.
In the article Kallista was compared against the Morgan Plus 8 which you can purchase now days for about 35,000 British Pounds (about $70k US) compared to the collectors price of 7,000 BP ($14k US). In that contest comparing Driving, Practicality, Character, Value and Usability the Morgan was judged with a total of 37 points and the Panther Kallista end up with 35.
I did find one on Ebay with a few days still to go with a current bid of just over $4k. It’s an 1986, 4 cylinder – not a V6.
Of course I spend a lot of time reading and again a lot of that is two or three-dimensional, although my wife says it’s a single dimension. She sees just “CARS” I see muscle cars, sedans (that I want to turn in to muscle cars), exotic cars and even some European cars. That’s multi-dimensional, don’t you think? I gained a little interest in them when I was a kid and my Dad surprised my Mother with a 60’ish MGB – mainly I learned that unless you wanted to fix ’em a lot…stay a way!!!
I gained a little more familiarization with another brand when I was in college. I had my license suspended….you can figure out why…so don’t make me say ‘too many speeding tickets”, ok? Thanks. So it was only about a mile or so walk to the campus from where I stayed, but if you are from one of the colder States, like northern New York, then you’d know that a morning jaunt on a Dec. morning is ‘nippy” to say the least. So I would catch a ride with a friend. He drove the one of the coolest cars I had ridden. It was a Citroen. Similar to this one:
It had the coolest suspension that would raise when you started it and lower when you turned it off.
My point being that there is another dimension to my reading – European cars. But I am in no way any kind of expert with any of them – although when I lived in Germany, I drove a very old European Ford Escort. That car was horrible!!!! However, it got me round, even when the upper part of the seat frame broke and the only way to drive it was by holding yourself forward using the steering wheel else the seat back, because it leaned so much, should dump you in the back seat. Last year I signed up for..please kneel…”HEMMINGS”… thank you….you may relax now… SPORTS & EXOTIC CAR magazine – some great articles and I enjoy Mike’s and Richard’s writings. Geezze, this is a long way around to the point that I picked up a copy of Classic & Sports Car magazine – UK produced – the other day.
In this was a series of articles that pitted 4 pair of cars against each other. One car in each pair was an expensive classic brand/model and the other was relatively inexpensive newer brand/model. Two things dawned on me, one was,”Hey, I’ve never heard of a Reliant Scimitar SS1 or a Panther Kallista.” The second thing was, “Hey, have never heard of any of these cars!” Normally if I have just one of these realizations – I won’t read the article… nope not interested…. but this time I did.
And now I need to know a little about these cars and I know you do to….all three of my readers!!! So we’ll take a look at the Panther Kallista and the Caterham Seven and the TVR S3 and the Reliant Scimitar SS1.
First up is the Reliant Scimitar SS1.
This car (at about 3000 British Pounds – $6000 USD) was being compared to the Lotus Elan (at 16000 British Pounds or about $32,000 USD). Here is what it looks like:
Reliant Scimitar SS1
Not bad-looking!!!!
These cars were made from 1986 to 1990, however the Scimitar actually arrived on the scene in 1964 with a Ford straight 6 cylinder as the power plant. These more recent models had a spaceframe chassis and fiberglass body, an iron block, alloy heads, SOHC 1809 cc, 8 valve 4. It also sported a Garrett T2 Turbo with electronic multi-port fuel injection system. This allowed it to lay out 140 HP and 141 lb ft of torque and reach a top speed of 128 mph and it only weighted 1969 lbs.
They sported a 5 speed manual transmission, rack and pinion steering, double wishbone independent suspension and disks breaks.
Just to give you some closure, it was compared to the Lotus Elan where it scored 2 points less than the Lotus (38 to 40) in Driving, Practicality, Character, Value and Usability.
Any one out there have one of these? Know anyone that has one? If so drop a comment and pic.
When you work with and/or drive classic cars there is a never ending battle between old school and technology. Do I leave the points and condenser in or do I go all electronic? Do I update the suspension with coil-overs or go with stock suspension? Upgrade the interior to cloth or go with the vinyl? Many of us face those battles all the time. But there’s one clash between old and new that we just can’t to anything about and that is when new non-car technology clashes with old cars.
Back in ancient times the man went out to gather or kill something to bring home for dinner. That hasn’t changed much, especially in my household. Every week I strike out into the jungle to visit the local gatherers’ spot and cart home something for dinner. The only killing going on is my checking account balance.
Today was the day for our weekly shopping, so I fired up the ’70 Stang and headed out, ready for the hunt. After I was done scouting for “sales” and had enough provisions to last seven moons, the clerk (oh, they don’t call them that anymore…’associate’ is the correct term) took my hard earned provisions(HEY!!!..its tough shopping at the mega grocery – carts speeding around like herds of prehistoric lizards, tar pits of jelly on the floor, ill tempered rival tribes in the gourmet isle…yeah…it’s tough!!), stuffed them in to about 20 plastic bags and dumped it all into a cart. On the way out of the store a couple of clerks….excuse me…associates…said have a ‘nice day’ and ‘thank you’, as I tried to push the squared wheeled cart to the parking lot and my car.
As I popped open the trunk on the Mustang, I remembered the floor of this cavernous opening is covered with the new vinyl (original material) I installed a few months back and nothing else (I don’t carry a spare for drag strip purposes and it wouldn’t work with the tire size anyway). I looked at the contents of the squared wheeled cart and realized that by the time I got home, my gatherings will be all over the place, even if I didn’t drive like I normally do. If I tied them shut, the bags are still going slide everywhere, including into the quarter panel wells, creating a dripping plastic bag full of wine that just moments ago were grapes.
My next option was putting the bags inside, on the vinyl bench seat in the rear and the on front bucket set. Still the vinyl was going to let everything slide side to side and drop down on the floor.
Then I remembered back to when I shopped with my mother as a kid and the vinyl seats in our old Chevy Biscayne. The saving grace there were the old school paper bags that stood up straight and were packed heavy to stay in place. Their square shape allowed for the use of effective load master techniques that kept them on the seat or upright in the trunk. Then I thought,”I should have gone with the cloth over the vinyl.”
1950 was the year Mercury produced its one millionth car and it also produced two Mercury NASCAR Grand National wins and was the official pace car of the Indianapolis 500.
1950 Indianapolis 500 Pace Car ’50 Merc Convertible
One of those wins on June 18, 1950 – Blair piloted a 1950 Mercury owned by Sam Rice to victory in a race at Vernon fairgrounds in Vernon, NY.
Mercury was able to reproduce that success with two wins in 1951 as well.
There was a bit of a dry spell until 1956 when they won 5 NASCAR Grand Nationals.
One of those wins was Tim Flock, with his Mercury in rather wet conditions in the 258-mile NASCAR Grand National event at Elkhart Lake‘s Road America.
3. Reader choice – you choose the next engine to highlight
I have a couple commercial ventures on the near horizon:
1. Certified Auto Appraiser – I’m about to finish my certification and will be specializing in Classic, Muscle, Antique and speciality cars.
2. Auto restoration project management. Focus is on those individuals that love their cars, but don’t have the time nor the experience to know what needs to be done. I’m actually waiting for my first car. It is a 1975 VW Bug coming all the way from Iowa City, Iowa, should be here this will for inspection and the beginning of its restoration.
So what engine would you want to see highlighted? Drop me a note here or on Facebook.
I was recently talking to a coworker of mine who own a 1949 Pontiac Silver Streak Delivery Van (link – http://wp.me/pKHNM-Bx ) and we were discussing his 6 volt system and the troubles with low amperage.
Well I just ran across a couple of interesting articles dealing with that subject. Now I will tell you I am not “the guy” for electrical work – nope not me (I had a bad experience – ok – a couple of bad ones). But even this one I can understand.
Increasing the power supply often means that you need to convert to 12 volt and maybe 15 years ago yes, but now 6 volts are readily available. So here is what you do (sorry no pics)
Take two 6 volt batters and link them in parallel by connecting the two negative terminals to each other and the two positive to each other. The main positive cable goes from the positive terminal of the first battery to ground and the main negative cable is connected to the negative terminal of the second battery. Of course in some case you may have to modify the batter shelf, but it will sure help kick up the cold cranking amps.
