When I began the restoration of my ’70 Mustang I knew that I wanted to replace the 250 straight six, with 175k miles on it, soon. I had several option, buy a new engine, buying rebuild or buying used. I chose to buy a re-manufactured long block and add my own components.
The option of buying a used engine and rebuilding myself wasn’t an option (average guy, average space and average tools) but I would have enjoyed it.
If you are going to purchase a used engine, dragging out of a junk can save you even more. But you’ve got to check it out before getting it home.
Here are a few tips that you can follow help prevent getting something home that the only real use it can server is to fill a corner the garage.
Now you aren’t going to be able to tear the engine down right there and look over all the parts but you could do the following checks.
1. If the engine still has the spark plugs, pull them a look them over. If they appear to have oil on them you might be looking at ring or value job being necessary (you might want to do that anyway). Likewise if they have water on them you may be looking at a head gasket problems or worse.
Fouled plugs
2. Most likely you are going to be able to pull the heads but you can remove the value covers. Look at for large mounts of sludge build up. That indicates other issues as well.
Sludge Build up
3. If you can drop the oil pan, check the contents for water or coolant contamination. You can also inspect the oil pump. Issues there indicate that there may be damage to pistons and crankshaft.
Oil Pan Gunk
Currently I’m looking for a used manual 4 speed for my ’70 Mustang. Now I don’t have any tips for that yet but I’ll let you know.
As with every car show there are some very good paint jobs. There are the cars that have a traditionally paint with flawless surfaces and deep ” you could shave in them” in them shine.
Then there are unique paint schemes, ghost flames or custom air brushed images.
Here are a few from a recent car show I attended.
Check out this custom Ford pick up.
Two Tone Black and Yellow...that's not all
Check out the bed!!!!
That is some great air brushing!!!
Check out this VW Bus.
Front view
Side View
And for really interesting paint jobs. Stop by the Bike section of the show.
Ghost Rider Bike
Even if you don’t like the paint you’ve got to appreciated the effort that goes into the work. Nothing but pure art.
Got a kool paint job on your ride? Drop me a pick.
A few big ones this week.
11/15/1977 – Ford sell its 100 millionth CAR. What was the car? A Mustang? One of the legendary F150s? Nope it was a 1978 Ford Fairmont Futura (the triple F).
Ford Fairmont Futura (The Triple F) Although some owners had an additional F to add.
The guy that started Honda Soichiro Honda was born 11/17/1906 in Japan.
11/18/1940 Buick produced it 4 millionth car.
http://ucapusa.com/heritage_buick.htm
1940 Buick Super Coupe
One day and 19 years later (11/19/1959) Ford stopped the production of the ugliest cars you’d love to own the “Edsel”.
I’m going to ruin the ending, but I did end up with a quality install on my wife’s Lexus with quality glass.
Thanks reading.
Tim…………………Ok…just kidding.
The ordeal continued when I told the shoddy installer that I didn’t want them to return and remove the fun house mirror from the font of the Lexus. This prompted several calls back to my insurance company. For about two hours I telephonically (that might not be a word!!!) climbed the corporate ladder until I got to the “Head of Corporate Glass” (that was the exact title…).
The individual I spoke to, listened to my story, including the intentional installation of faulty mirror support, and assured me the concern would be taken seriously. That part went well and the next part was even better, but first have to set it up a bit.
It seems that when the previous windshield was installed I was authorized the original glass because the car was under 3 years old. That was their policy. However, since the car was over 3 years old this time, they would not authorize the original glass, unless…I paid a difference of $800.00. (More on the price of glass in a bit later.)
So I was surprise when the ‘Head of Corporate Glass’ (I hear this in a booming God-like voice, like when God spoke to Charlton Heston in the famous movie “Mose and the 10 Commandments”) say, “We’ll wave the $800.00 and authorize you original glass.” I won…I won…I beat the evil insurance company!!!…Oh hold the proverbial horses…the round-up wasn’t exactly over.
She next told me I had to have the same installer put in this ‘quality glass’. Oh…the horses have stopped. I did not agree and she insisted, stating that because of the warranty they (the insurance company) had with Mr. Shoddy Glass Inc. it was required to have them re-install the new piece. I said that I should have the right to have anyone put it in and that whatever agreement they (the insurance company) had with them (Mr. Shoddy Glass Inc.) wasn’t my problem. I also mentioned again their total disregard for the safety and quality which should concern them (the insurance company….ok…do I have to keep lawyer-ing up here?….actually I just want to see how annoying I could be!!!…I sure someone will let me know.) and they would have paid a lot more if the swinging mirror resulted in an accident. She still insisted and I asked to be moved up a rung in the corporate ladder and she said there wasn’t a next rung. I said no again and she said ok. Ok…let the horses go because this was a complete victory!!!! Score a point for the down trodden masses!!!!
Almost…..it took nearly 3 weeks to get the new glass. The first company I selected said they couldn’t order the windshield. I said, sure you can. A few day later, they said we can’t find the glass to order. I called the dealership and got the part number and even how long it would take to get in (two days). I gave the installer the information. One week later still no windshield. I called the installer back and found that they called the insurance company and someone a bit lower than ‘Head of Corporate Glass’ unauthorized original glass.
So another call to ‘Head of Corporate Glass’ . I wasn’t able to talk to HER (get it..all caps???) but the lady I did talk to found the note from HER and said sure, no problem. I said “Hold your horses, missy”. And with that we telephonically (it’ll be a real word when I done with this article!!!) found the guy that “de-authorized” my original glass and while we are all conference together, had him talk to a 3rd installer and tell them I was authorized… with everybody on the line as witnesses. Ok…party hat time and no can’t you get back time it took you to read this!!!!
There was one more interesting revelation when I compared the prices of the glass provided by Mr. Shoddy installer, my insurance company preferred vendor, paid for the glass and what Mr. Speedy (yup that’s what Mr. We Know What We Are Doing installer is officially known as) paid for original. I know why Mr. Shoddy was preferred. See below:
Mr. Speedy – $1350 for original Glass
Mr. Shoddy – $252 for OME glass (There was no extra charge the fun house entertainment.)
In two months I will have been writing this blog for 1 year and I have enjoy every minute of it.
When you blog like I do, to share a specific area of interest, you are always trying to increase readership. Now if this were a commercial enterprise for me, then increasing my readership would be Job One. (Come on, which car company’s slogan was that? If Ford jumped into your head that would be correct.) However, it is not, but still I’m always searching for a way to make this blog a place more and more folks want to view.
There are a lots of ways to do that, none of them huge as far as bringing in the masses and some aren’t inexpensive and others are labor intensive. (Guess which one I do…oh…yeah…cheap and labor intensive…Average Guy….say it!!!!……Average Budget!!) While searching for ideas or processes I could take advantage of, I ran across some helpful hints. One in particular makes sense, namely, keeping the site updated regularly. This suggestion dictated that it be daily, which is really a good idea. However, the method it promoted was to jam the blog with other folks news feeds, articles and automatic updates from outside sources.
I thought about this a bit and I tooled around the web and looked at commercial blogs and forums and I realized that everyone had read this particular tip and employed it. And I thought, I just don’t see the point. The blog is no longer the owners writings, but really just a reorganization of things floating around on the web. Nope, not for me.
I still think keeping up the daily effort is the right way to go, but I can’t do it in that manner.
Although I do pop on videos that I think are cool and maybe a link to a forum or another blog, I’m going to keep the core of this blog full of original material, meaning my own scribblings and occasionally notes from the readership.
The life’s blood of a blog run like I run this one, are comments and readers. So drop me a note, ask a question, or give me a suggestion ( I do requests).
10/12/50 – Kaiser-Fraizer built their 500,000th car – 4 years later they opened up car manufacturing in South America.
1950 Kaiser-Frazers
10/13/1902 – Packard Motor Car Co was formed out of the old Ohio Automobile.
1902 Packard Run-About
10/15/24 – The original Mr. Government Auto Company Bailout. Mr.Lee Iacocca was born this date. If that’s all you remember him for, turn your car lover card…this guy rocked it in the car world!!!! This might change your mind…yea…the Mustang was his baby too.
How ya like him now???!!!!!
And now for the new arrivals!!!
10/14/65 – the Oldsmobile Toronado – a friend of my had one of these when I was in college back in the late 1970’s. It was my first awareness of a front wheel drive car.
1966 Toronado - Kool factor of 8.5 out of 10.
And one of my favorites
10/16/58 the Chevy El Camino arrives. Now I’m big fan of those fins!!! These also spawned the GMC Sprint and a few other variations.
10/4/1983 A new land speed record is set by Thrust2 a British jet propelled car. It was driving by Richard Noble and reached a top speed of 650.88 but the actual record was 633.468 base on the average of two runs within one hour.
Thrust 2 - but ya know..it's a rocket..not a car
10/6/1955 – Ford takes is Lincoln Continental to the Paris Car Show
1955 Continental
and on the same day ll years later (1966 — so you don’t have to do the math) Cadillac give the world a peak at the Eldorado.
1966 Eldorado - Here's a Pink one.
10/8/1959 – Ford introduces the Falcon and thus started a racing legacy. These cars were light and are still round as they make great drag racers.
1969 Ford Falcon - notice on much the tail lights look like a Maverick's
10/8 – Two birthdays on this date
1890 Edward Rickenbacker – World I U.S. Fighter ACE, created the Rickenbacker Motor Company which only lasted 7 year before bankrupting him – make the first cars with 4 wheels braking system. Owned the Indianapolis Speedway between the Wars.
1922 Rickenbacker Touring Car
1869 Frank Duryea – Created Duryea Motor Wagon Company – first gasoline powered car.
Duryea
Thanks for reading. Coming up more wrenching tips and the first installment of the next engine series featuring Chevy’s 283 power plant.
Some of you know I don’t just write this blog, but participate on other forums as well.
For a little while now, I’ve been writing bi-monthly articles for www.racinginamerica.com site.
Here is some info on the goals of the organization. No you don’t have to donate, but it is tax deductible.
Henry Ford Museum
This section of our website contains information and resources for anyone who might want to better understand this fascinating and complex sport.
Automobile racing is exciting and colorful, and those same qualities make it a stimulating and enticing subject; also conducive to developing knowledge and skills.
Our objective here is to provide both the motivation and the resources for further exploration and education.
The content here will continue to grow as time goes on. It will include more in-depth features on the history, people and innovations of American auto racing. We also will present practical applications of math, physics and science in racing, which provide career opportunities in fields that include design, engineering and a variety of technologies. All this is presented in a way that’s designed to spark interest and stimulate a desire to learn more.
Check in here often to find new opportunities and resources.
As a starting point, we offer these two downloadable Educator DigiKits in pdf format:
Science, Life Skills and Innovations in American Automobile Racing Educator DigiKit Teacher Guide and Unit Plan for grades 3-8
Physics, Technology and Engineering in Automobile Racing Educator DigiKit Teacher Guide and Unit Plan for grades 9-12
While I getting my act together after a very nice week-long road trip I wanted to share a car that I once owed and that for all too common reasons let it go to a new home.
1974 was about the time the U.S. government’s fossil fuel consciousness began to kick in, choking the horsepower out of the muscle car. But this car was an exception. Here’s its specs.
Gran Torino Sport
VIN: 4H38Q107971
Body: 65R
Color: 3D
Trim: DB
Trans: U
Axle: 9
DBO: 75
Date: 08/73
Vin Code: 1974
VinCode Body Serial = Gran Torino Sport 2dr HardTop
VinCode Body: Medium Blue Metallic
Seat: Balmora B/Cloth & Corith (L/B Bench)
Trim Code: Med. Blue
AxleCode = 3.25:1
DSOCode: Phoenix
Assembly Plant: Lorrian
Undercarriage is aerodynamic ball joints are much larger than other Torino’s of the same vintage
Transmission is unique (Minus the traditional “Humped” housing)
Engine is 351-V4 Cobra Jet (Not a Cleveland)
9” rear end
10.5:1 ratio
Came with a 3500 Stall Speed Torque Converter.
This was an amazing car.
Unless you are an expert on the Torino what you won’t know is that the 351 V4 Cobra Jet for 1974 was only one of 300 engines made that year. It took me nearly two years of research to find this out.
I sold this car to a nice guy up in Green Bay. Here is a before shot:
