Welcome back to Project Sports Roof (#ProjectSportsRoof). The struggle is real!!!
You saw in the last video my replacement of the linkage that was lost by the repair shop (along with my new battery and started). This repair shone the light (as often happens with older cars) on a previous repair. Some might call it a hack and I get it, there are times when you need to take short cuts, but as usual short cuts often have short life spans.
Take a look at the video:
When you have issues with shifting an automatic transmission and it’s related to the linkage you have the option of fixing it right or fixing it “wrong” (i.e., short cut). At some point in my Mustangs earlier life the C4 transmission was swapped our for a used C6. It seems that the C6 (from a 1972 Ford – which really doesn’t matter the C6 has changed much in all this time) had a broken shift lever. Take a look:
Here the run down:
A is the broken shift lever. What you should see there is something like this:
B is what is commonly called a ratcheting shift lever. It’s a replacement that is ‘clamped’ on to the stub of the shift lever to shift the trans. This is done because to replace the unit you have to drain the transmission, remove the pan, the filter and the valve. This is a PITA. Especially true, if you just put the transmission in and filled it with fluid!!!) So the after market ratcheting shift lever is common. This what the parts looked like when I took them off:
Custom hack
Of course C is a washer and D….well, D is a very special customization or it’s just a hose clamp.
As you can see at the end of the video the ratcheting shift lever was just sliding. I suppose I could have just tightened clamp down and see if it shifted, but how reliable would it be…might as well fix it right!!!
Thanks for checking on #ProjectSportRoof.
I have more coming up on my 1973 Stang and more on Bill’s ProjectBeepBeep as well.
Tim
Excellent troubleshooting work. Success is right around the corner.