Ford Mustang’s 50th birthday party swings at the World’s Fair site in Queens. The Ford Mustang celebrated its 50th anniversary with an extravaganza at the World’s Fair grounds in Flushing Meadows-Corona Park in Queens. Mustang fans from around the …
Vrooming into a fifth decade of production, Ford Mustang celebrates its 50th anniversary today and Your Take decided to join the party. We asked contributors to fire up their cameras and share some of their favorite Mustang memories with us. YOUR TAKE: …
Just a field full of vintage Mopar metal!!!! You’ve gotta love the prices that these car brought.
I often read where automotive writers type, “Where are all the classic/muscle cars?” They really need to get out more. There are many places just like this one across the U.S. Take a drive a cross the Painted Desert. I’m sure I saw at least 10 muscle Mustangs in the backyards, garages and car ports!!!
Ok, let’s get overly simple: Your classic Mopar has come from the factory with a leaf-spring suspended rear end. This setup has been installed in cars and trucks since the automobile’s humble beginnings. It works well in factory-designed situations …
With over 30,000 members, ForABodiesOnly.com has become the largest and leading authority online for information focused on “A” Body Classic Mopar cars and is pleased to celebrate a decade of serving the community. Chicago, IL — (SBWIRE) …
If you are over 40, you might remember back when talking to your car was only done to coax it to start or make it to the next service station or when it failed to do either one. Gadgets were limited to a radio with AM/FM and a cigarette liter.
Now days you can give your car voice commands and it can give you a host of information, like my Drivers Information Center (DIC) which runs my C7 Corvette. We can even control the environment on different sides of the car from temperature on down to how much air blows out of your vented seats.
But that wasn’t always the case. If you are way over 30 you might recall the only way to adjust the temperature was to open your vent window.
Recently I was at a car show and if you’re a regular reader you might recall that I love dash boards, especially those that are painted and chromed, I saw a curious feature on a Rambler dashboard(I don’t recall the year). It was labeled “Weather Eye”.
So a little research was in order.
As you may know Nash was an auto maker and through a series of mergers or purchases changed it name to Nash Kalvinater, eventually became American Motors Corporation (AMC). Well they were the first to develop a car heater. Back in 1938 engineers got the idea to run fresh air over the hot engine water and pass it into the cabin. The air came in through the vent in the cowl and passed the air through a heater core filled with hot coolant. Later on they figured out how to keep the warm are in and the cold are out, by adding a fan to keep constant pressure in the cabin.
A year later Nash engineers added a thermostat for the first climate control, dubbed the “The Weather Eye”. Here are some pics:
This was the dash that caught my eye.
Here is an image from the web that shows a better image of the “Weather Eye”
Here is an image show the “Weather Eye’s” controls
A while back I ‘had’ installed a Spec Stage 3 clutch with steel/iron fly-wheel. I did a lot of research before hand and decided that this would be a great combination for my auto cross/daily driver. So far I’ve been happy with the switch. It’s not as ‘street’ smooth as the stock but it helps get the torque to rubber!! But you have to do your research. If you noticed in the first line above I used the phrase ‘had installed’. It is a monster job to disassemble the tunnel and you don’t want to have to do it again after find out that you can’t leave a red like without loosing rubber, nor pay the $$$ for someone else to do it.
I grabbed the article below to share, it has some great tips.
Selecting the Right Clutch for Your C5/C6 Corvette
If you’re a late-model Corvette owner and you’ve ever been in the market for a new clutch, then you’ve discovered that there is such an array of options to choose from, you could find yourself being a little bit lost and confused. To make things even more difficult, thanks to the transaxle layout of the C5 and C6, swapping a clutch is a far more involved process than on a car with a more conventional driveline. A clutch swap isn’t the kind of job you want to do twice on these Corvettes, so getting it right the first time (and having the room to grow for more horsepower and torque down the line) is critical. Read on:
1997-2004 Chevrolet Corvette Clutch Kit Ac Delco Chevrolet Clutch Kit 381408. ac delco clutch press and driven plate kit 11-11/16 in. x 26t x 1-1/8 in. diaphragm; includes flywheel and cover; a high quality direct fit oe …
White Noise – White noise is a common synthetic noise source used for sound masking; it is effective in improving the mood and performance of workers by masking background noise.
So crank up the volume on your media player and help your co-worker improve their mood. This is my kind of white noise!!!
This is a very well done car, in my opinion. Modified just enough to make it a powerful machine and still look like a 1966 Chevelle. I say ‘WOW” you will too when you read the article. (see the link above)
The Power Plant And Putting It To The Ground
The motor itself is an LS 418 cubic inch stroker with a Lunati crank and H-Beam rods connected to forged pistons. The top end is comprised of ported LS3 heads with an LS9 supercharger. All the machining and assembly of the motor was performed by Scoggin Dickey out of Texas. Mated to the motor is a T-56 six speed transmission that’s outfitted with an ACT dual disc clutch to help lay the power down to the pavement. All this equaled out on the dyno to an impressive 600 hp and 650 lb.-ft. of torque at the wheels.
Monster Chevelle
Got a monster chevy in the garage? Project or not…let me hear about it!!
Classic Motorsports is an American periodical devoted to classiccars, classiccarrestoration and vintage racing. It was established in …
A Nevada prison is giving their inmates the chance to restore vintage cars. Don’t use this as an excuse to go out and get arrested. – See more at: http://www.carbuzz.com/news/2011/10/30/Nevada-Prisoners-are-Bringing-Classic-Cars-Back-to-Life-7705491/#sthash.HNHeZB1O.dpuf
A Nevada prison is giving their inmates the chance to restore vintage cars. Don’t use this as an excuse to go out and get arrested. – See more at: http://www.carbuzz.com/news/2011/10/30/Nevada-Prisoners-are-Bringing-Classic-Cars-Back-to-Life-7705491/#sthash.HNHeZB1O.dpuf
A Nevada prison is giving their inmates the chance to restore vintage cars. Don’t use this as an excuse to go out and get arrested. – See more at: http://www.carbuzz.com/news/2011/10/30/Nevada-Prisoners-are-Bringing-Classic-Cars-Back-to-Life-7705491/#sthash.HNHeZB1O.dpuf
A Nevada prison is giving their inmates the chance to restore vintage cars. Don’t use this as an excuse to go out and get arrested. – See more at: http://www.carbuzz.com/news/2011/10/30/Nevada-Prisoners-are-Bringing-Classic-Cars-Back-to-Life-7705491/#sthash.HNHeZB1O.dpuf
A Nevada prison is giving their inmates the chance to restore vintage cars. Don’t use this as an excuse to go out and get arrested. – See more at: http://www.carbuzz.com/news/2011/10/30/Nevada-Prisoners-are-Bringing-Classic-Cars-Back-to-Life-7705491/#sthash.HNHeZB1O.dpuf
A Nevada prison is giving their inmates the chance to restore vintage cars. Don’t use this as an excuse to go out and get arrested. – See more at: http://www.carbuzz.com/news/2011/10/30/Nevada-Prisoners-are-Bringing-Classic-Cars-Back-to-Life-7705491/#sthash.HNHeZB1O.dpuf
This week we are highlighting a few milestones and a birthday and a corporation formation.
Starting out with big Happy Birthday to Ferruccio Lamborghini , born 4/28/1916 in Italy. What many don’t know is Ferruccio brought about Lamborghini, because he was happy with his Ferrari due to frequent and poorly done repairs. They say he confronted Enzo Ferrari and that meeting didn’t go well and Ferruccio decided to build his own cars.
Ferruccio Lamborghini
On the same day in 1953 Kaiser-Frazer purchased Willys. By 1955 Kaiser Industrial (name changed) stopped building cars in the U.S. (only with the exception of Jeep production in Ohio.
’55 Willys Jeep Wagon
’55 Willys Bermuda
4/29/1959 Fords 50 millionth car. It was assembled from specially designated parts shipped to Dearborn from Ford plants throughout the country. It is powered by the 292 cubic inch 200 horsepower V8 backed by a three speed automatic transmission. It sported triple tone gold, black and white interior. It is now privately owned.
1959 Ford Galaxie.
5/2/1918 Chevy becomes part of GM. How did this come about? Here is the short version:
Billy Durant started General Motors after taking control of Buick. He incorporated a we more car brands in with GM including Oakland, Olds and Caddilac. He was forced out of GM and started Chevrolet with partner Louis Chevrolet. Chevrolet did well and Billy began buy more stock in GM (he had kept his shares when he was ousted). He completed his take over of GM by offering current GM stockholders a smoking deal on Chevy stock (7 shares) for one GM stock.
5/3/48 Willys Jeep Phaeton debuted.
1948 Jeepster Phaeton
5/3/49 Packards 50th Anniversary 2000 gold Packards. Yes that did happen. They were painted in a special paint code of Gold. Each were powered with 327 c.i.d., 150 hp engine.
1949 Packard – None of the 2000 were convertibles – only about 600 verts were produced.
I guess Chrysler….or…um Fiat…can’t seem to generate enough interest in the new Viper selling only 91 cars so far this year. Nor did they sell that great last year only 591 went to new homes.
2013
2014
Chrysler laid of about 90 employees recently at SRT and now the Viper assembly plant is closed until June.
A source in the supplier industry tells Autoline Daily that the Viper assembly plant will be shut down for 15 weeks. Chrysler says it will be shut for 11 weeks starting the week of April 14. The plant was originally going to shut for …
There were many Corvair owners that braved the wind and brought their Monza’s, Drop Tops and Van’s to the 29th Annual Chevy Showdown today.
Here are some of the pictures.
Parking and setting up
I’d estimate about 20 Corvairs attended. The white Monza was beautifully done!! There were a couple unique Corvair powered entries.
In a previous post entitled “Lost Classics – Trucks – Corvair Rampside” I mentioned that I’d never seen a Rampside in person. Well, I can scratch that off my car bucket list. Here is the 1961 Corvair powered Rampside.
Corvair 95
This Corvair 95 Rampside is in very good condition and got to the show under it’s on power provided by the ‘Flat Six’.
Now the Rampside also came in the Greenbrier packaged. And there was a Greenbrier Corvair there….this great looking 1962 van with the 110 engine.
1962 Greenbrier Corvair Van
AC in front and back!!!
Yup that’s A/C stuffed back here!!!
There now I’ve seen all manner of Corvairs!!! Only that was there was the Corvair wagon.
More coming up on the Chevy Showdown here in Tucson, Az
