Welcome back to the final few posts of the floor pan replacement for #ProjectSportsRoof.
Let’s get right down to it.
I realized that I didn’t catch much of the work on the floor plan under the right rear seat. That was really a lot of work. They don’t make a panel for that on the 1973 Mustang SportsRoof. So I had to use a foot well panel and “customize” it to fit. See here:
This shot is that pre-welding and it shows the hole above the muffler, under the seat. (Sorry for the short clip)
This image shows the customized foot well floor panel:
A lot of work went into forming that panel.
Yes it was tough to make it, there were a lot of cuts. (The tub there is Irish Spring soap – it keeps pack rats out of the Mustang while it’s parked!)
If you recall the left side of the car wasn’t bad at all and I replaced just the foot well panel. It cut the same as the right side and here it is in place. Here’s a little recap of the work done.
Next up is the welding, coating and heat/sound barrier.
Hey, welcome back to #ProjectSportsRoof (1973 Mustang). We are working through the rusted floor pans and I’m about to make the cut for removing rust from …
HEY!!!! It’s Red Nose Day!!! Don’t know what that is? Red Nose Day is a special day to come together, have fun, and make a difference for kids who need us most. To find out more information – GO HERE …. RED NOSE DAY —- REDNOSEDAY.ORG
If you post a pic of you in a Red Nose on my FaceBook page AGCARRESTORATION – you’ll be entered to win a cool car guy/gal gift. (or email it to me at AGCarRestoration@cox.net)……… Come On…..there’s still time!!!!
I got mine at Walgreens!!!
Headed to work in the Vette!! Not sure having the top off is a great idea with my Red Nose On!!!
Chillin’ at work with my Red Nose On!!!
GET YOUR NOSE ON!!!!
IT’S ALWAYS ABOUT CARS….. SOMETIMES IT’S ABOUT KIDS!!!
Red Nose Day is a campaign dedicated to helping children and having fun. Proceeds benefit children and young people in the US and some of the poorest …
I’ll say it again, it’s not part of my daily routine (Although I which it was!!!) that I get to deal with some rare cars. By day I’m the Director of Information Technology for a retail company with stores throughout Arizona at home I’m a Corvette and Mustang (check out #ProjectSportsRoof) loving car guy. But today the two intersected and that equaled a cool day.
We pushed the Detroit out of the building and into the sun light again – most likely will be its last bit of Arizona UV rays. This beauty is on its way to Hood River, OR where the owner is loaning it to a transportation museum. The guys in this video, Tom, David, Lynn have worked and lived with this rare mode of transportation for over 10 years. It will be missed.
As if that’s not enough for one post, there’s more to this ‘most excellent day’ (to steal a phrase from Bill and Ted).
It’s tough to pick a transport company to move your special vehicle across country. I have used my share, transporting a Mustang, a Torino, a VW bug and a motorcycle via different carriers and it’s a big deal. The company selected for this rare car was FSI Transport Service and the care the driver showed was very reassuring that this 1929 electric car was in good hands. FSI is operated by Frank and Laura Martinez, out of El Paso, Tx. Their rig was perfect for the job – being that the Detroit is a bit taller than the average car.
Often the car you are shipping travels with several other cars that are headed the same way. But this time there was only one travel mate for this trip. It just happened to be a beautiful 1953 GMC Custom pickup, according to the driver it build by the folks at Gas Monkey Garage and headed home to the owner.
That’s a beautiful truck and a worthy travel mate for the old electric car.
Remember the Detroit Electric SP:01? Announced in 2013, it followed a well-thumbed recipe and promised to be an esoteric entrant in the eco-friendly sports car class. SP:01 Well, it’s back and in production form ahead of official sales in 2015. And it’s a bit different to before, adopting a new fastback …
I haven’t done a Parking Lot Spotlight in a while and this is a great car to pick the series back up with. Check this one out!!!!!
Wheels look great!!!!
Love the chrome work and the wrap around backup lights. That two tone paint is pretty good looking too!!!
I find these to be such a great looking vehicles and dare I say in some cases even better than some of their Mustang cousins. The hidden headlights and the full (nearly full) length tail lights make these so distinct and much more difficult to restore then the Mustang – as far as getting NOS parts.
I’m not alone in thinking that the new for 1967 Cougar was unique and that first year through 1970 were the best years. After that they became cross-bred with a Marauder and then by the mid 70’s virtually indistinguishable from the squared off T-bird not to mention it’s overtly plushiness.
In 1969 you could get the Cougar with a 302, 351W in either a V2 or V4 configuration or Boss 302. Previous years a 289 was available and in early 70’s the 351C, 351 CJ, and 351 Boss were options. Those are the best engine Ford had to offer at the time!!! (May be ever!!)
For 1969 you could get the Cougar in the Coupe, Convertible with a standard trim, Eliminator or XR-7 packages. Production numbers totaled just over 100k units broken down like this:
I enjoy seeing readers’ cars. Here is a 1982 Mercury Cougar Stationwagon…..YES!!! That’s what I said…”They did what????” Submitted by Steve Sears. There were 19,254 Cougar wagons built, in GS and Villager trim, in 1982. The only other year there were Cougar wagons was 1977 when 9,700+ built. I’d be willing to bet that …
The new 2017 Chevrolet Corvette Grand Sport combines a lightweight architecture, a track-honed aerodynamics package, Michelin tires and a naturally aspirated engine to deliver exceptional performance. The Grand Sport Collector Edition features an exclusive Watkins Glen Gray Metallic exterior with Tension Blue hash-mark graphics, satin black full-length stripes and black wheels. the new Grand Sport combines a lightweight architecture, a track-honed aerodynamics package, Michelin tires and a naturally aspirated engine.
With Corvette Racing in its DNA, the all-new 2017 Corvette Grand Sport is a pure expression of the car’s motorsports-bred pedigree. It was introduced today at the Geneva International Motor Show.
Lightweight architecture and track-honed aerodynamics
An engine offering an estimated 1.05g in cornering capability and up to 1.2g with the available Z07 package
Coupe and convertible available this summer in U.S. and fall in Europe
Grand Sport Collector Edition available later in model year
The option that, perhaps, makes the most sense is to rebuild the existing engine. These days there are so many rebuilding scenarios, it can make your head spin and really lighten you wallet. With each one of the scenarios brings with it even more decisions and a host of mathematical calculations.
The major concern is just how bad it might be in the block. You can see much with just the heads removed, but what I could see of the cylinders and piston heads, seemed serviceable. Scored cylinder walls – bad; just trashed bearings – not so bad. This is the first unknown you need to know. From this point you’ll know the cost of just making it run again and how much $$$ you need or have left in the budget for any upgrades.
For me I don’t think I’m in this for just a ‘repair’- e.g. bad bearings – replace them and snap it back together.
Option 1: Rebuild it just like it is. Simply get a $600.00 kit and replace everything and put it back together – same heads, same intake nothing changes other than the knock goes away.
Typical 351C Rebuild Kit
Option 2: Rebuild it better. For my 351C 2v, the simplest way is to add the kit and give it more room to breath. Add a 4 barrel carb and matching intake.
Option 3: Rebuild it bigger. Have the engine bore to 0.030 or 0.040 and find the matching kit (you can buy the rebuild kits to match the new bore) and add a 4 barrel carb and matching intake.
Option 2 and 3 give you more decisions you’ll have to make. How much horse power and torque will this changes make? Can you existing stall converter and transmission handle that increase? (My concern as I have C6 automatic) Will you need to change the gearing in the rear end to optimize the new power? Will this new power impact handling or frame/body? (The concern here keeping that body from twisting/rolling – my Mustang still has the sub-frame – being a unit body – installation of sub-frame connectors is on my list.) You are looking at a few Benjamin’s to make this all happen like it should – all based on the basic rebuild direction.
So these are some of the considerations I’m weight now for #ProjectSportsRoof.
I’ve done all the clean up and all the adjustments necessary to get a good reading on the health of the ’72 351C engine in my 1973 Mustang. The next step is to check the compression. First up was to warm the car a bit and then pull the plugs. Here’s what the …
This is the wrap up on the compression testing for the 1973 Mustang w/ a 1972 351 Cleveland power plant. You’ll might have notices that I referred to the remote tester, which is my code for remote starter…yeah…that’s it!!! All of these tests were dry test and I should have done a …
It’s pretty cool to happen upon a car show in the course of running weekend errands. I normally have a calendar event for the major shows and/or the ones I plan on attending. But now and then I see one in passing, and of course I am compelled to stop and usually do. Sometimes there are some real gems. By gens I mean cars you don’t see at the average car show as they may not be in top condition or even restored at all (that doesn’t stop me) and the owners would enter them.
You don’t need shiny paint to go to a car show. Here’s #ProjectSportsRoof at its first car show.
A couple of weeks ago I picked up my son at his place and we took care of some business. I always have my ‘old car’ radar on and it went off as we passed a little church. We had finished all of our tasks so I stopped. There may have been 15 cars in the parking lot with hoods up and doors open. True to form there were a few cars that one rarely sees at a car show.
This awesome Fox-body Mustang Vert was in the line-up:
Fox-Body Vert w/ Whale Tail!
Oh MAN!! Look at that plumbing!!!!
There was this 1964 Chrysler 300 K. You don’t see many of these at a show. Love that it’s a 2 door.
’64 Chrysler 300 K
Cool Steering Wheel!!
Here is a rare sight!!! Mercury Comet Caliente VERT!!!!
This Comet is in O.K.shape
This cars is nicely preserved and a little body work has been done, but still very nice car.
But this next car was my favorite as unlikely as that may seem, I’d buy this car and I’d show it big time!!! Check out this 1974 Mustang II:
I think it’s a sharp little car!!!
Nice wheels!!!!
Yeah..that’s a V8 – 302!!
Still lots of room under that hood.
Interior is so awesome.
You can tell that this car was stripped and restored. It was painted with, even the interior, with a white rhino lining/satin like paint. It is just amazing and I’m was impressed.
Other duties happen outside of working on #ProjectSportsRoof…like yard work!!!!! While attempting to tame the foliage in the backyard on Sunday, my electric hedge clippers became self-aware and in true Terminator fashion, exacted revenge on two fingers on my left hand – index and middle. (Yes I have pictures and no I won’t post them here.) Pretty sure I taught the neighborhood new curse words.
Of course this necessitated a trip to the ER, much to my dismay and my wife’s. It took the doctor a fair amount of time sew them up – 31 stitches and to pass the time the doc and I discussed cars – specifically his new Tesla. So over all it was a nice break from the average weekend routine and I scored some pain meds to boot!! (HA,HA).
I’ll be out of commission for the next couple of weeks so maybe I can catch up on some blogging. Might be a bit optimistic, considering how long it has taken to just type this post!!!
Note to self: Don’t throw out the next door hanger for a landscape service.
I am slurring my typing, meds are kicking in …..SO…thanks for reading.
Thanks for checking back on #ProjectSportsRoof. I’m about the finish the cuts and
fitting for the right rear foot-well that was rust all the way!!!! Final Fit for foot-well …
Thanks for checking back on #ProjectSportsRoof. I’m about the finish the cuts and
fitting for the right rear foot-well that was rust all the way!!!! Final Fit for foot-well …
Welcome back to #ProjectSportsRoof. I run my car projects much like I run my IT projects. You always have to know where to start and know the end game. As with any project that isn’t being built from scratch, in other word, you have to work with what you’ve got, …
After spending $$$ to get my 2v heads done right and after driving my 73 Stang for about 50 miles, the Cleveland has developed a knock in the bottom half of the engine.
It’s not uncommon when restoring cars that an undiscovered issue pops up and changes the entire project plan. But the dilemma I have now has multiple facets.
First there’s what to do about the engine. Rebuild it if possible? Replace with a short block, reusing the 2v heads? Buy a crate engine? Or set it on fire in the driveway? Each one of these options have it’s own inherent hurdles and impacts the timeline differently.
Second there’s issue with the old conundrum “Well as long as….I might as well do the ….” In this case it read like this… “As long as the engine out, I should, really, redo the engine bay.” That’s has is own timeline with the cleaning and sanding and priming and painting and replacing clips/fastener….etc.
So let’s discuss the engine.
There are a few “known knowns” (thank you Donald Rumsfeld!!!):
The current 351C engine isn’t original to the car – in fact the car was born with 302. Why is that important? I don’t have to worry about the matching numbers thing, that ship sailed sometime ago. Basically anything goes.
Not rebuilding/replacing is not an option.
Budget. Although there is no set dollar amount, there is restraint how much can be spend in a given time.
Then there are the “known unknowns”
Is it the cam?
Is it just the bearings?
Are the cylinder walls serviceable?
What do I want this engine to be?
Options: (just a few)
Option 1: A friend of mine suggested a crate engine – just order one from Summitt Racing or Jegs. Make all the power I want.
Ford Racing 363 C.I.D. 500 HP Boss Crate Engines – $8439.97
– Discussion: $$$ (Could stop right there with this one.) Getting a 400+ HP turn-key crate would be just awesome. In my option that is what these Mustangs were meant to be. (ching-ching) Getting tons of power to the rear wheels with the current automatic C6 transmission will required a possible rebuild and an upgraded torque converter. (ching-ching again). But having a Cleveland in the engine bay is way cool!! I grew up in GM family… there weren’t a lot of discussion about Ford product and anytime I heard “Ford talk” a 351 Cleveland engine was mentioned. I do like the look of it under the hood the are wider than the Windsor family of motors. Keeping it a 351C V2 will be less expensive and you can make good power from it if you do it right.
– Conclusion for Option 1: Not gonna happen!!
Option 2: Find a good used 351C and install that
– Discussion: This is a good possibility. That’s already happened to #ProjectSportsRoof. The 302 was replaced with a 351 (whether it was a Windsor or Cleveland is not known) as this was the engine the previous owner hauled it out of a field with. As it turned out that engine was seized and the current engine was found and installed (along with the used C6 trans). It may be tough to find one. If and when you do the mileage shouldn’t be a known unknown and you need to determine the condition as best you can by listening to it run. If it is just sitting on the shelf, would you perform a “trust-fall” with the seller? Bottom line is a used engine “is like a box of chocolates”…you might end right back up where you are now. Frankly this would be my last option.
Old Studebaker dealership buildings tend not to attract the attention of big-city mayors or generate headline news these days. One in Phoenix, however, has proved the exception to that rule when demolition began on it earlier this month, prompting preservationists and that city’s mayor alike to condemn the developer responsible.
Designed by architect W.Z. Smith and built in 1947, shortly after Studebaker introduced its new postwar cars, the Stewart Motors Co. building – named after the dealer that built it in the heart of Phoenix’s Auto Row along Central Avenue – incorporated a turntable in its glassed-in corner showroom along with numerous Streamline Moderne elements all rendered in brick, with nary a wagon wheel in sight. As described on Modern Phoenix, the building created “a joyful dialogue with the streetscape, which is pleasant to enjoy both on foot or by car.”
Many Phoenix residents, however, probably know the building better for its subsequent tenant, Circles: Discs and Tapes, a locally-owned record store that put go-go dancers on the turntable to attract teenagers cruising the Central Avenue strip during the Sixties and Seventies. Despite leaving many of the original features intact during renovations to the building, the owners of the record store never applied for historic status for the property before closing it in 2009.
In an effort to preserve the building, the city’s Community and Economic Development Department and local preservationists began to negotiate with Empire Group, the developer that intended to place a 19-story apartment complex on the site. According to Downtown Devil and Robert Graham’s City Views, Empire had earlier in the year proposed a design that maintained the street-facing facades of the Stewart Motors Co. building, meanwhile asking the city for a tax break for its project, but threatened last month to tear the entire building down as a negotiating tactic.
“While the developer denies that they have any plans to demolish the building within the 30-day life of the permit, they made clear in a public meeting… that they would seriously consider complete demolition of the building if their request for property tax incentives from the City is denied,” Graham wrote.
This isn’t the only dealership left. The A.E. England Motors Inc. (1926) was remolded and is now part of the ASU campus and had a few other business operation from there. Like wise with C.P. Stephens DeSoto Six Motor Cars (1928). $250K was spend on that and it’s now called DeSoto Central Market and has bar and restaurant housed there. The old Lincoln Mercury dealership (built in 1947) has a automotive repair conducting business there.
