73 Mustang is back!! Project SportsRoof is Alive!

Well this day was long time coming.  My 1973 Mustang has finally returned home and it sounds fantastic!!

You followed #ProjectSporstRoof, you may recall  I ran into time issues and ability, to get the transmission mated back up to the engine and the components had to be placed back under the hood and new radiator installed. I had disassembled the engine, send it out to be bored (.040) and crank was milled a bit and rebuilt. That was over a year and half ago. In Feb of this year I decided to get some help getting it running.

 

 

A relative had an acquaintance that was starting a second shop here in Tucson to match the success of their first shop that was about an hour way. I wanted to keep the car local so I could check in on the work being done. So I asked and received an estimate and the price was fair. My only stipulation was that the car stay in Tucson and not their out-of-town shop. What I didn’t know was that their idea of starting a shop was to use a garage at a start-up/pop-up used car lot. In return they would be doing really cheap work for the car dealer in lieu of paying expensive rent.

There’s very few times such a plan works out and one day my Mustang disappeared and I wasn’t informed. I eventually (weeks) got a hold of them and found that my car was right where it I didn’t want it…at the out-of-town shop.

Now, I understand business deals falling part, especially when you start-up with little capital and hook-up with another start-up with little capital. What I didn’t like was not knowing that my car was now no longer in the city. Checking on the progress was going to be impossible and as it turned our some of my parts were left/lost at the Tucson shop. An additional problem was that I forgotten to pack a few parts and it took massive coordination effort to get the items to them.

 


So lets total this up real quick:
1. Missing car
2. Found car
3. Missing/Miss placed parts
4. Lost parts
5. Long periods of un-returned text and voice messages.
6. Lack of trust.

Number 6 is huge!!!

If you don’t have trust in the shop then everything, even the normal things, that arises when you are restoring a car are suspect. Combine that with a newly rebuild engine, never fired-up, well lets just say I was concerned that the proper cautions would be attended to and I’d end up with a pile of ugly Mustang parts in my driveway that I’d have to get rid of or sell the house to afford to fix it!!! So I held my breath and reluctantly had them push on.

Only two real issues came up, one was the drive shaft, it has been repaired a some point in the car’s history and poorly done at that and the yoke was in rough shape. A local shop said that could fix it for a set price, they couldn’t and ended up replacing the shaft and for the original price quoted. The other issue was a panic call/video from the shop, showing my Mustang vomiting radiator fluid in the air like Hawaii’s Kīlauea. That of course is what happens when you put a Windsor thermostat in a 351 Cleveland.

So I reduced my expectations and told them all I wanted was for the car to be mobile. I wanted it driven off the trailer and driven in my driveway and I’d be finished with them. The manual shifting you saw in the video is a result of a lost part.

Now #ProjectSportsRoof is back and I can get on with all the little projects that are left…like installing the shift linkage…yea…that should be first!!!

 

Thanks for reading and I can now say…there’s more coming up for #ProjectSportsRoof!!!

Tim

1973 Mustang Project SportsRoof – Exterior Walk-Around

Welcome back to #ProjectSportsRoof.  I run my car projects much like I run my IT projects.  You always have to know where to start and know the end game.   As with any project that isn’t being built from scratch, in other word, you have to work with what you’ve got, …
1973 Mustang – Engine Bay Work

If you look back at #ProjectSportsRoof post you’ll see the condition engine bay.  During those videos I mentioned that I was going to clean it up and hit it with a rattle can.  Again this isn’t going to be a concours restoration, it’s going to look nice and it’s going …
1973 Mustang – Project Sports Roof

As I posted before, after a vigorous (not read ‘desperate’) I finally found my next personal project.  The 1973 Mustang Sports Roof  Fastback is what I settled on.  Now we start the project that has been dubbed #ProjectSportsRoof (yes I find it necessary to use the ‘hash’). 1973 Mustang Color …
1973 Mustang – Project Sports Roof – Pertronix Ignitor Update

Well win some and you lose some.  If you’ve seen my other posts related the replacement of the points and condenser for the 351C you’ll notice that I gave conversion high marks.  This was all based on the years of use I got out of the conversion I did on …

 

Restoring Tach for 68 Road Runner – Project BeepBeep

Bill gets “techie” in a “tachful” way as he restores the rare Tach option on his 68 Road Runner. #ProjectBeepBeep

 

 

More coming up!!!

Thanks for reading!!

Tim

#ProjectBeepBeep

#ProjectSportRoof

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …
Project BeepBeep – 68 RoadRunner Disc Brake Conversion – FINAL CHAPTER!

Welcome back to the #ProjectBeepBeep.  We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner. Did I say this is the final chapter?   Well….     Sometimes during a project you just can’t afford the time to do a video, especially when you have a friend …

 

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Wrap Up

So you can grab a couple more tips for Valve Cover Gaskets installation and you get to hear BeepBeep running like a top….love that engine music!!!


Some great tips and one more project down for Bill and BeepBeep!!

Coming up next an update and #ProjectSportsRoof and BeepBeep gets tachy (get it?….not Tacky but Tachy!!!)

Thanks for reading.
Tim

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Part II

Bill gives some tips on cleaning up the valve covers and tries valve cover studs.


Wrap up of the valve cover gasket replacement is up next.

Thank for reading.

Tim

#ProjectBeepBeep

 

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn. More coming up …

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted. Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …

 

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Part 1

Continue following Bill’s journey to a “Leak Free MOPAR” for his 1968 Road Runner. #ProjectBeepBeep

Wild E. Coyote is back!!!  Apparently he’s been working at Summit Racing!!!!

BeepBeep is getting some new valve cover gaskets!!!!  But will that stop the leaking?!?!?!?!

 




 

More coming up.

Thanks for reading/viewing.

 

Tim

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

 

 

Project BeepBeep – Oil Pan Gasket Part III

Wrapping up the oil pan gasket and what’s next for the 68 RoadRunner?

Take a look:


I have to add my note and this might rub someone the wrong way but I am going to toss it out here.

I took my 1970 Mustang to a shop run by a guy I trust with my cars.  After getting the Mustang back I leaked from two spots.  When I asked his mechanic about the said  “Old cars leak.”   That phrase really irritates me every time I hear it.   This day in age with all the improvement in gaskets from rubber to rubber coated metal to make your or form you own, this just no reason for your car to leak.  After the incident above, I took my Mustang home and replaced the gaskets and drove it for about a week and then went back to my friends shop and had the mechanic look under the car…it was bone dry.

Unless you have a part that can’t be found there is almost no reason, given all the options, for your old car to leak.   Having said that, Bill makes a good point – there are times when a leak, a non-engine killing leak, becomes to expensive or time consuming to fix.   But if I know Bill, you’ll be seeing a video with him fixing all the leaks.    (;^o)

Thanks for reading.

Tim

 

 

73 Mustang (Project SportsRoof) Engine Dress Up and Venting/Vacuum

Did you think I sold #ProjectSportsRoof?  Nope.  I’ve been busy and I’ve been serving as editor to another cool project – my constant reader Bill’s ’68 Plymouth RoadRunner (#ProjectBeepBeep). However, I have been doing some work on the sports roof and in this video you’ll see a little bling under the …
Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …

 

Project BeepBeep – Oil Pan Gasket Part II

Bill finds that he needs to drop the center link on is 68 Road Runner to remove his oil pan. Check out the details:


The we have more coming up on this mini-project.

Thanks for reading

Tim

#ProjectBeepBeep

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

73 Mustang (Project SportsRoof) Engine Dress Up and Venting/Vacuum

Did you think I sold #ProjectSportsRoof?  Nope.  I’ve been busy and I’ve been serving as editor to another cool project – my constant reader Bill’s ’68 Plymouth RoadRunner (#ProjectBeepBeep). However, I have been doing some work on the sports roof and in this video you’ll see a little bling under the …

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …

Project BeepBeep – Oil Pan Gasket Part I

Welcome back to AGCR.  While I’m hoping that #ProjectSporsRoof get make to my driveway this week, Bill it taking on the old adage “Old Car Leak”.

First up for #ProjectBeepBeep (Bill’s beautiful 68 Road Runner) oil pan gasket.

 

 

Here are the box-end wrenches, I mentioned in the caption.

 

More on #ProjectBeepBeep coming up.

Thanks for reading.

Tim

 

ProjectBeepBeep

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …
Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …

Project BeepBeep Get’s Even Cooler – Part Two

Welcome back!!!

After finding a leak in the radiator, Bill decided to replace the it with an after market unit.

Here is Part Two of the process.

 


More coming up with Bill’s warp up of the radiator swap for his 1968 Road Runner!!!

 

Thank for reading.

Tim

#ProjectBeepBeep

#ProjectSportsRoof

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …
Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …
Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …
Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …
Project BeepBeep – 68 RoadRunner Disc Brake Conversion – FINAL CHAPTER!

Welcome back to the #ProjectBeepBeep.  We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner. Did I say this is the final chapter?   Well….     Sometimes during a project you just can’t afford the time to do a video, especially when you have a friend …