I’m not sure what year it. You couldn’t really tell by the headlights or tail lights. But one doesn’t often see one of these in this condition too often.
One of a kind.
Back of the Bun!!
The interior was set up like a tour bus.
What I can tell you is that the big dog is resting what appears to be a Chevy Dually pick up truck bed. According to the sign it’s powered by a 5700 6.0 Vortech Chevy engine.
This one is for the C4 crowd (You digging this one Tony Z.?) There will be two winners one from Corvette Pals and one from my blog. Here is what I’m looking for. I use to auto cross my 1984 Crossfire (still do SCCA with my C6) and I love to see the C4 in action.
So post of a video of your C4 in action (action photos are ok too!) – Nothing illegal (snicker) or unsafe, mind you. Burn outs, auto cross, drag strip…Looking for some action shots. Post them up at https://www.facebook.com/pages/Average-Guys-Car-Restoration-Mods-and-Racing/185827701454279 and mention The Average Guy’s Car Restoration, Mods and Racing blog.
OH…what’s the prize? How about a 1984 Red Corvette promo model in the original box or a 1984 Silver C4? These are the model cars the dealerships give away. Can’t win if you don’t play…can’t win if you ain’t got a C4!!!! Game on!!!
1984 Silver C4 Promo Model - Yes those are Mustangs in the back ground!!!
You are going to like this pics from Red Stripe Adventure’s blog. The lowered Lincoln in stealth black and you have to agree that Hudson looks great – in spite of the WWII aircraft theme.
Thanks for reading.
Not only is there a ton of beautiful cars at Barrett-Jacksonauctions, there are also a lot of venders. Anything from car care products, to engine builders to custom building shops.
One of those was Karl Kustom Corvettes located in Des Moines, Ia. I had a chance to speak with Jim Hidy one of the reps for Karl Kustom at the auction this past January.
SWEET!!!!
Nice looking car, yes? HELL YES. But there some interesting things I didn’t know about these custom Vettes and how they are made.
I spoke with Jim at length and I have to tell you that how I thought these were made wasn’t even close and how they are made was pretty surprising to me. Jim set me straight.
Great Creation
These are of course C6 machines with the look of the 60’s Vettes. All the great handling and power of the C6 underpinning and classic looks. I thought ‘how cool they manufacture a body that snaps on the C6 frame. But that’s not how it’s done.
So I’ve gotten the new electrical connection installed on the switch. I now need to cut off the old switch and strip the wires.
Ya know it’s hard to take a video while you a squeezed under a car on jack-stands!!!
In this video you can see the striped wires.
Installing the bracket was easy enough except that it wasn’t formed properly and had to be bent. Keep in mind this is not ‘harden’ steel and too much bending will weaken it and when the reverse lever comes back will just push the bracket backward and not allow the button to be depressed enough to make contact and complete the circuit and turn the backup lights on.
Here it is all installed.
Here it is with the car in the reverse position. You can see the button depressed.
Here is a video shot.
And the intended results:
Now I’d love to tell you that all was well, however remember the bolt and the Sharpie mark I made on it so that I could gauge how far to screw it back in?
Well I was still pretty happy with the progress and I took the car off the jack-stand and started her up and backed out of the garage. That went well, but there didn’t seem to be a first gear once I decided to pull the car forward, nor second gear. She isn’t going to move.
So I’ve got the car out of the garage and right at the edge of the drive on the driver’s side. I have to get under the car and tighten that bold a few more turns. I end up laying partially on the drive way, partially on the rocks (we don’t have grass in your yards here..we have small, gather in you pants when you are laying on them, sharp rocks) and partially on one of your shrubs. Ok, lets not forget the glowing hot Hooker header pipes..yeah…just back out of the garage…no worries the hair on my arm will grow back. Any way, I tighten it just enough to get the car to go into second gear and pull it back into garage.
It had to go back up on the jack-stands for more adjustments, and I had to the switch off once to make adjustments to the bracket. But success was achieved!!!!!
The wait for the 2013 SRT Viper has only been about two years–since sales of the previous model ceased–but for fans of the venomous vanguard of American speed, it’s been a long one. The wait is drawing to a close now, and as we get closer, we get more of what to expect. Today, it’s the new Viper’s logo, dubbed “Stryker.”
Designed by Vince Galante, a Chrysler designer and Viper owner, the logo aims to capture the “sinister look and ‘evil grin’ of the original,” according to DriveSRT.
Previous logos were named Sneaky Pete and Fangs. Stryker follows in the theme with a stylized viper’s head, though the newest is the meanest-looking yet. As these sketches reveal, it’s born of the snake itself, but with a healthy dose of artistic interpretation.
While we don’t really think the badge has much to do with the car itself–they could have put a cupcake on the nose of the last Viper and it still would have been one of the meanest things on the road–the new direction fits our eyes well. Galante also notes that the new logo has some lines that reflect those of the car, too. What do you see?
aunik_aronno
