Category Archives: Suspension Mods

The New Vette & Missing the Crossfire

By | | , , , , , , , , , , , , , , , , , , , , , , ,
6 Comments

Before you judge me…LOOK!!!!!

2007 Corvette

Wait…LOOK AGAIN!!!!

Side view

Another View

And one more…..

The LS2

Yes the 1984 C4 Crossfire has a new home.

But  in its place is the 400 hp LS2 powered 2007 Corvette.

She has a 6 speed manual trans mission, Z51 suspension, leather and power everything, key-less entry and starting and a host of other cool stuff.  I’ll go into more detail in the next post.

I thought I’d miss the ’84 more then I do, it will be going to a good home and hopefully will stay a Crossfire.  The ’84 goes with twice as many miles on it then when I bought it, lots of new, original parts and some improved and a really awesome stereo, it’s a better car then when I got. It deserves to be a show car and not a daily driver/grocery getter/race car (drags and auto cross)/show car.  But it did them all very well, with the trophies to prove it.  It was a lot of fun and I learned a lot about that middle ground technology that was a huge advance from the older cars, a first of its kind in many ways and a stepping stone to technology that is in the replacement Vette.

I’ve heard from a lot of guys (pssstt…when I use the word “guys”  I mean all genders….just wanted to be clear ) that really miss driving their older Vettes, there’s really nothing that can capture the rawness of that kind of driving.  I’m bit luckier then those guys because I can still jump in to my ’70  Mustang (thanks to a very understanding better half) and get that feeling of old school nothing but metal and tires driving.  I think that alone makes it easier to let the ’84 go.

Thanks to the guys up at Dynamic Crossfire Solutions in Chandler, Az (http://www.crossfireinjection.net/) and all the guys in my Corvette club – Arizona Corvette Enthusiasts (ACE) http://arizonavette.net/, they helped a ton with my learning curve…HEY  GUESS WHAT GUYS….I’m going to have a bunch of new ‘stuff’ to learn.

So get ready loyal readers, (all three of you!!!!).  I’m going to take my average skills, average tools, and now below average budget and take on new technology.

But where to start????!!!!????

I’ll be back to you on that.

Thanks for reading.

Tim

Corvettes Classic and New-ish

By | | , , , , , , , , , , , , , , , , , , , , , , , , ,
3 Comments

Well, I’ve been preoccupied over the past week with …ok…don’t shoot me, you classic car lovers…….working a trade for a 2007 Corvette with my 84 Corvette.  Yeah, I know..WTH???  

I know, I know.  I love my 84, it’s unique and the value has increased since I’ve purchased it.  But there is a desire to upgrade.  This isn’t the first time I’ve considered getting another Vette, I actually considered a trade for my Mustang for a second Corvette. 

I have to admit the recent troubles with my 84 does play a small part of the desire to replace it.  And this 2007 Black on black C6 with 4oo plus hp, with a 6 six speed manual trans, with only 40k miles.  Still under factory warranty.  But the price was just unbelievable.  The original deal fell through because we couldn’t agree on a good price for my Vette.  But it looks like I might have a second shot at it tomorrow. 

Even if, it’s hard to get rid of my first Vette and there is always the concern that you’ll regret it later.  So I figured, I just add a third car to my stable!!!!!…..oh….that’s funnier then you might think….considering  how UNDERSTANDING my wife has been with my current stable of classics….but even I know that’s way…yea…way too much for even a saint such that she is.  “Love you cutie”  (just in case she gets really bored and actually decides to read my dribble.) 

So I’ll catch you all up by the end of the weekend. 

Oh..here’s what we are looking at.  Drop me a note and let me know what you would do!!! 

2007 Vette Trade or not too Trade????

 

Another view...give you view....trade or not to trade???

 

I have a fun give way coming up  as well as some more auto factoids and a quick fix for my Mustang. 

Thanks for reading 

Tim 

Corvette Consternation Part 2 Electrical

By | | , , , , , , , , , , , , , , , , , , , , , ,
2 Comments

So I bring the Vette home and the steering feels pretty good and although my 70 Mustang has power steering (I had been driving that all week..yeah..I know..”poor baby!!!”) there really is no comparison between the two.  I get home and park it for the night.

Next morning I’m up early going to wash both cars, so jump behind the wheel of the Vette to pull it forward a bit and…..nothing!!!   No power, nor lights, no key in the ignition buzzer, nothing.  Hey, there wasn’t even a clicking noise when turning the key.   I’m think great..what could I have left on that would kill the battery that badly.  Answer was nothing.

Now if you’ve some of my earlier entires, you’ll recall that electricity and I mix like, um….like..um…Amps and water!!!!   As long as it stays in the wire and gets from switch to device and nowhere else, I’m good.  Have that perfect universe interrupted and I’m not hanging with that.  I hate electrical work.  I hate thinking about, hearing about it and living through it.  And this isn’t limited to car, but that’s my topic here.

So I get out and raise the hood, but for I get to far I see a huge spot of fluid laying under the car.  Right about now I’m starting to get that…”all old cars should be crushed” thought running through my head and then..”I’m gonna find the guy that did that work, right now, on a Sunday and drag his happy but out of church (if such a demon would be allowed in one) and rub his noise in my…yeah…you guessed it….power steering fluid!!!    (Breath…breath..that was two weeks ago….come one now..simmer dow…………..HEY IT STILL FEELS LIKE YESTERDAY!!!!   Ok….ok…better now, it’s over and it turned out….OH>>>WHOA….don’t tell them now they won’t read the next two posts and your rating will drop below 2 reads a day!!!…Yes…Yes must get a grip!!!!)

So I started up the Mustang (they sit side by side together in the driveway nose to butt – have to back the Vette in or it won’t clear the end of the driveway) and maneuvered it over to the Vette so I can jump it with jumper cables.  I have a fairly new jump box but it never really seemed to work, and then I lost the power adapter ( stupid electricity) and it just sits in my garage.  I hook the cars together with jumper cables and allow the Mustang to run on high idle.  Get in the Vette and …nothing… not even single dash light.  The charging when on for some time before I could get the Vette to turnover and she started up, but she wasn’t happy.  I took the cables off and then for some unexplained reason I turn the vette off.

Crap!!!  So I turned the key, but I already knew how that would because there was still no key in the ignition buzzer..nope….and no click of the starter solinoid…and that would be a triple “Crap”!!!!  It took just as long to get her started again only this time I wasn’t going to turn it off.  I drove it over to the guys that put in the rack and pinion steering (of course it’s Sunday and I call and let some one know I was leaving it and to put it inside.  At this point I wasn’t happy, the power steering leak on a new system and now an electrical issue!!!!

Next day was a Monday and I called up  my friend Tim and said, “Hey..uncool to find fluid leaking and my electrical system is  f ‘ ed (short for fried….yeah right).

In the end it was just a hose that didn’t get tightened, oh and my alternator was in fact f ‘ed (short for fried).  The alternator came that afternoon and the car was ready the next day.  And that is that…end of ……………..yeah…nope…..I wish!!!!!

If you can guess what’s next, I’ll send you a DVD.

OH..here is the new rack and pinion all clean and nice looking!!!

New Rack and Pinion This was taken today 8/31/2010

Thanks for reading and yes Steve Sears..you have to wait  for tomorrow for the rest.

Corvette Consternation Part 1 Steering

By | | , , , , , , , , , , , , , , , , , , , ,
2 Comments

Every one that reads this blog knows that older cars, no matter how careful you, or how much you baby your car you are going to have problems.  That’s the nature of any relationship.  Things break, undiscovered issues, or even your own missteps can issues.  You just can’t through in the towel “Honey, I’m going to have to find another mate, you just can’t run as far as you use too.” or “Sorry but that broken leg changes everthing…ur outta hereeee.”  (Lawyer up…my wife is fine, no injuries, still running fine..no worries…just wanted to be clear!!!!)

Well, over the past few weeks my Corvette has been a serving up a bunch of consternation.

If you remember a few posts back I had replaced one power steering hose and need help with the power steering reservoir.  That got done.  Shortly after that, a leak developed from the front end and over the course of two days it got a little worse.  So I pulled it in to the garage and crawled under neight..and that’s no small effort. 

The power steer of course provided hydraulic power to make the turning of the front wheels easier. (There you got the basics of the how it works.)  This entire process insists that the fluid, in this case power steering fluid stays in place.  Well my beauty failed conform to the standards. 

Rack Pinion

If you look at the image above you’ll see the plastic boots (A) that cover and protect the shaft.  Those are supposed to be dry.  When I touched the boot on the left side of the Vette fluid poured out, clearly it was no longer dry.   What was also very very clear at that exact moment was the pain in my wallet. 

Basically, the you have two options when something that is supposed to be dry is wet on a car, replace it or rebuild it.  I chose both.  Lucky for me the complete unit for my 84 Vette is still available through on-line Corvette parts houses.  EEERRRRKKKK..While I’m writing this I have the Speed channel up on up in the corner of my monitor, they are testing an Aston Martin DBS against a  Bentley w/ W12 engine…soft girl cars…of course that girl’s got some skills, putting eyeliner on at 150 miles per hour!!….end of EERRRKKK – I’ll let you know how that turns out.

A quick trip down the street to Tim Sisk proved my investigative results.   I’m the Average guy with Average skills, there was not something I wanted to attempt. Additionally, it requires a front end alignment.  So I order one, and because I hate having the car in the shop I had it expressed shipped, or at least that’s what I asked.  It didn’t shipped and took a total of four days.  What…you say…”oooohhh poor baby, took 4 days to get it here!”    Hey, that’s a life time for some car guys!!!!

Now ordering the rack and pinion requires a core charge (that’s where you have to return the old part or pay the core fee – they rebuild the old part and resell it) but as I stated I wanted to do both so I paid the core fee and kept the part.  This allows me to either learn to rebuild the part or sent it out to have it rebuild and store it way.  Plus I have the original part, although there isn’t much benefit in collector value for having the orignal rack and pinion (numbers matching) 84 Vette, well least not for another 20 years!!!!

The part was replaced and the car realigned, in total it was out of service for a solid 7 days. Picked the car up and drove it home and that was that…and if you believe that, I have some swamp land out here in AZ to sell ya!!!    Stay tune for what happened next

Oh…the Aston Martin and Bentley match up.  Here the details:

Braking 0-100 to 0 (time speeding getting up to 100 and then distance measured for stopping-shortest distance wind) ….15 second from 0 to 100 for both cars, breaking the Aston won at 40 feet shorter stopping distance.

60-130 test on roll – Bentley win 13.2 second, nearly a second faster than the Aston

The rolling mile  – top speed 165 mph for Bentley, 1 second faster than the Aston – 159 mph

Road course – 55.6 seconds for the Bentley      53.8 seconds for the Aston

Like I said – girls car..my 84 Vette has a top speed of nearly 200 miles an hour.  My personal best, 174 mile per hour in the Vette – yeah that’s just last year.  Dyno proven.

Thanks for reading.

Auto Factoids for 8/22/2010

By | | , , , , , , , , , , , , , , , , , , , , , , , , ,
Leave a comment

Very like week this week. 

OH….the Corvetttes at Carlisle is a huge event going on over in Carlisle PA.  I might make it there one of these years. 

For all you caddy lovers on 8/27/1902 the Cadillac company was born.  Yup it was its own company. 

This sure isnt' what one thinks of when they think of a Cadillac

 

Oh and this was the olds from around that era: 

1897 Olds.

 

London, England had an auto (and plane) historical event this week.  Charles Rolls was born on 8/27/1877 (Rolls Royce). Beside creating the an iconic car, they did plane engines and more. 

1903 Rolls Royce

 

Thanks for reading. 

Tim

Auto Factoids for 8/8/2010

By | | , , , , , , , , , , , , , , , , , , , , , ,
3 Comments

8/8/55 – test of first solar car.  William Cobb  created a prototype, but it was only a 15 inch model. Basically, an electric current was produced that in turn powered a tiny motor. The motor turned the vehicle’s driveshaft, which was connected to its rear axle by a pulley. I couldn’t find a pic of this one.  However, Alan Freeman developed the solar-powered car  in 1979 that you could actually put a human in.  Here’s the pic.  (It’s really just a bike…I think.)

Alan's Solar Car.

 

8/11/66  Chevy introduced the Camaro.  There is some discussion on whether there is such an animal as a 1966 Camaro, they  were, build in 1966 but sold in 1967.   Here a  pic.

8/15/56 Packard no longer producing cars in Detroit.  Previously the Packard company bought Studebaker and tried to keep the Packard name a live in 1957 by reworking a Studebaker and give it the Packard name.

1956Packard

 

1957 Packard...looks alot like Studebaker

8/21/1897  Oldsmobile becomes a company. Of course the company is no longer in business another icon gone.

1897 Olds

Thank’s for reading.

Tim

MOPAR’s 318 Part II

By | | , , , , , , , , , , , , , , , , , , , , , , , ,
3 Comments

Before I start this next segment on the 318, I have to admit that organizing and presenting this work of art (oh..yeah..I’m laughing too!!!!) could have gone in a lot of directions.   The two that stuck out the most for me was by year (chronologically) or by brand.  Neither was a solid idea and at some point in the ’70s the only thing separating brands within most U.S. car manufacturers wasn’t much more than vinyl vs cloth seat covering.  So I decided to go with brands, Chrysler, Dodge and Plymouth, knowing that there we would be some crossover information and it might look a bit disjointed.  There’s some good stuff, and a couple of things you might know about the 318.

Chrysler began using the 318 in 1967 and carried that power plant until the late 1990s.

From 1967 to 1971 the 318 carried a 230 hp rating w/ the standard 2 barrel carb, managed 340 ft lb of torque and sported 9.2:1 compression ratio.  (that is actually a lower compression ratio than the original Ford 250 straight six I took out of my Mustang).  In 1967 the 318 engine was used in the Belvedere, Satellite, Fury, Coronet, Polara and Charger and in 1968 they added as the base option in the Dart GTS and Barracuda.

1967 Polara 4 door.

 

From 1972 to 1979 the 318 was bounced around in the horsepower arena between 150 to 140.  That’s nearly 100 hps lost from the late 1960’s.  At lower end of the new scale were the California models with the extra smog control.   It was still a mainstay, being the base engine choice for the Duster,  Cordoba, Monaco, New Port and unexpectedly the Road Runner,  just to name a few. It was never sported anything bigger than a 2 barrel carb and the compression dropped to 8.5.

It didn’t get any prettier in the 80s either, although there a bit of a bump in the high-end of the hp range to 175 hp but the company more than made up for that dropping the lowest number 120.  Interestingly, they made the California models with 155 hp and a 4 barrel carb.  The compression stayed about the same, but  in ’83 – ’90 they made a HD version of the engine that had between 165 to 175 hp, depending on the year and sported a 4 barrel carb.  This configuration managed to lay down 240 – 250 ft lb of torque, not too bad in one of the lighter cars, like the Dart, but barely power enough for the big old St. Regis. The 318 was also added to some of the most memorable cars….come on..you doesn’t remember “vooo..la rau….oh..oh…” (Volare )and the LeBaron, and Aspen.  Even some larger cars like the St. Regis, New Yorker, Gran Fury (I can’t see any car begin called grand with only 120 hp, but that’s just me.) and the Imperial.

1976 Volare

 

Oh and speaking of the Imperial something interesting happened in 1982 and 1983.  That little something was EFI.  More on that in the next segment.

Thanks for reading.

Tim

’89 318 efi intake to ’79 carbed 318 – Mopar Forums

Hello, my brother and I are thinking of taking on a project and would like to know if the throttle body injection components from the 1989 318 in his truck will work on a 1979 318 engine. The reasoning behind this is due to our …

Auto Factoid 8/8/2010

By | | , , , , , , , , , , , , , , , , , , , , , , ,
1 Comment

This isn’t my normal “on this date back in…” factoid.  This one is current.

8/6/2010

At the VW Automóveis Ltda. plant in Portugal today the hundred-thousandth third-generation Scirocco rolled off the production line. Since its launch in 1974, this compact sports coupe has been the most successful Volkswagen two-door with more than 800,000 sold to date. Another notable Giugiaro coupe is the breathtaking beautiful Alfa Romeo Giulia Sprint.

These cars were a hot item in the use for a short while.

2010 Scirocco

 Thanks for reading

Tim

Auto Factoids for the Week of 7/23/2010

By | | , , , , , , , , , , , , , , , , , , , ,
3 Comments

7/20/1984 E.L. Cord was in Missouri.  If you think he’s only responsible for the Cord 

1937 Cord

 

 Think again!!!!  How about a company that included Stinson Aircraft, Checker Cab and American Airways (now American Airlines)? But let’s just stay with the cars.  How about the Auburn and Duesenberg?  His history is a good read. 

7/23/1894 first auto race.  It was organized by the Parisian magazine “Le Petit Journal” between the Paris to Rouen.  And the winner was………… Count Jules-Albert de Dion it took  6 hours and 48 minutes at an average speed of 19 km/h (which was approximately 11.806052652509345 p/h). I don’t know what he drove but 2nd places was taken by George Lamaitre and he drove a Peugeot: 

Peugeot 3 hp

7/24/1929 – 2, 000,000 Model A Ford built – A huge milestone. 

1929 Model A

Wrenchin’ Tip 7/18/2010 – Fluid Removal

By | | , , , , , , , , , ,
4 Comments

I recently did some work on my power steering system found this tool to be handy. 

 There is a lot of fluid in the power steering reservoir.  As soon as you release the hoses, it’s going to poor all over the front of your engine and then on the ground.  An oil change tub will help keep it off the garage floor, no staining and no tracking it around. However, it will still run down the  engine.  

So, I used a turkey baster.  EEEERRRKKK…(yeah it’s in caps!!!)  Do not put it back in the kitchen when you’re done….NO…NO..NO….In fact if you are smart, ask first!!!  I did and I was surprised to hear  “Sure, but you’ll have to purchase a replacement.” For a minute I thought….well that’ll come out of my car budget….and I thought…I wonder if I can clean it up…and…ummm…(kidding of course).  It worked great and I just have to purchase one…but not until Thanksgiving!!!!  $10 bucks says..I’ll forget and have to run out on Thanksgiving and stand in line for 1.25 hours, if I can find one at all.  

 BTW – I recommend “Pampered Chef” brand for power steering fluid removal!!!! 

Pampered Chef Turkey Baster