I’m really liking these concepts. But they are almost on the verge of being too angular. What do you think?
Content courtesy of American Muscle
Content courtesy of American Muscle
So I’ve gotten the new electrical connection installed on the switch. I now need to cut off the old switch and strip the wires.
Ya know it’s hard to take a video while you a squeezed under a car on jack-stands!!!
In this video you can see the striped wires.
Installing the bracket was easy enough except that it wasn’t formed properly and had to be bent. Keep in mind this is not ‘harden’ steel and too much bending will weaken it and when the reverse lever comes back will just push the bracket backward and not allow the button to be depressed enough to make contact and complete the circuit and turn the backup lights on.
Here it is all installed.
Here is a video shot.
And the intended results:
Now I’d love to tell you that all was well, however remember the bolt and the Sharpie mark I made on it so that I could gauge how far to screw it back in?
Well I was still pretty happy with the progress and I took the car off the jack-stand and started her up and backed out of the garage. That went well, but there didn’t seem to be a first gear once I decided to pull the car forward, nor second gear. She isn’t going to move.
So I’ve got the car out of the garage and right at the edge of the drive on the driver’s side. I have to get under the car and tighten that bold a few more turns. I end up laying partially on the drive way, partially on the rocks (we don’t have grass in your yards here..we have small, gather in you pants when you are laying on them, sharp rocks) and partially on one of your shrubs. Ok, lets not forget the glowing hot Hooker header pipes..yeah…just back out of the garage…no worries the hair on my arm will grow back. Any way, I tighten it just enough to get the car to go into second gear and pull it back into garage.
It had to go back up on the jack-stands for more adjustments, and I had to the switch off once to make adjustments to the bracket. But success was achieved!!!!!
Thanks for reading,
.im
I have no words:
‘nough said.
Tim
A quick recap, I had a 1967 Ford Mustang Shelby manual 4 speed transmission rebuilt and installed it in my 1970 coupe. This included a Hurst Competition Plus Shift Kit. Of course the configuration isn’t even close to the original 3 speed and the old bracket for the reverse light switch won’t go back on.
I didn’t really think of this as the time of the installation so I just zip-tied the wiring and old switch up until I picked up the conversion part for the Hurst kit. This included a reverse light switch and a properly formed bracket. Cost was about $29.00 at the same local hot rod shop I bought the shift kit from – they are car guys not salesmen, which is why they didn’t mention the light switch bracket.
Don’t asks me why I felt the need to take video of the kit still in the package but here it is:
As you can see in the video below. The switch had two screws as posts for the wiring, new switch..old school technology. Basically you’d wrap the end of a wire around the screw and tighten, not a great connection for hanging under a car, nor for the amount of vibration the 302 dishes out. Used the screws and the small ‘lock” washer to hold the electrical connectors in place. That will last.
I’ll up this piece tomorrow.
Thanks for reading.
Tim
No matter what your politics are, everyone appreciates American Muscle.
Obama Loves American Muscle
As the Washington D.C. auto show took place, President Obama decided to make a visit. Truly impressed with the American muscle & sports cars. Though he checked out many new models and the likes of the controversial most iconic American sports car, Chevy Corvette(photo above), it seemed like the new Ford Mustang Shelby GT500 Super Snake; or simply Shelby GT500; is what really grabbed his attention by stating, “This is sick”.
Thanks for reading.
Tim
Sometime planning ahead is a good idea. So want to buy a car now that will sure to be a classic? What would you buy?
Here is what Hagerty’s has to recommend.
1) Buick Regal, $32,535. Buick, he says, “is doing it with the Regal GS”;
2) Ford Mustang Boss 302 Laguna Seca Edition, $48,100. “A beast on the track, yet tame enough to drive on the street”;
3) Jeep Grand Cherokee SRT8, $61,785. “Rugged, go-anywhere looks” but “performance characteristics that would earn respect on a race track”;
4) Fiat 500 Abarth, $22,000. “Small but wicked,” and already having buyers lining up;
5) Volkswagen Golf R, $36,000. A “pocket rocket…geared towards someone who enjoys driving”;
6) Porsche 911, $82,100. A car to buy now and lovingly keep, “holding its value over the long-term”;
7) Chevrolet Camaro ZL1, $54,095. “Old school muscle is alive and well”;
8) Nissan GTR Black Edition, $95,100. The car that today’s young videogamers will crave “years down the road after their student loans are paid off”;
9) Dodge Charger SRT8, $46,795. Won over by the “performance pages” on the video display that constantly update driver on performance;
10) Audi TT RS, $56,850. “A car with global appeal (that will keep) global demand several decades down the road.”
Give me your feed back.
Replaces that is, boot as in shifting boot. (Were you thinking…since I just got back from the Barrett Jackson Auction.. I was considering getting rid of the Stang ? Nope..but I tell you there were a couple of cars I’d even swap for…that’s for sure!!)
When the 4 speed trans got installed we used the old rubber boot and it did tear. So I replaced it with a nice leather replacement from Scott Drake.
See the boot:
[vodpod id=Video.15992027&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0090.mp4]
Boot Replacement 1, posted with vodpod
Here is a quick look gaping hole:
[vodpod id=Video.15992144&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0089.mp4]
Boot replace2, posted with vodpod
Holes to be drilled:
[vodpod id=Video.15993270&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0091.mp4]
The chrome plate (well not really chrome) was originally held in place by the last fold of rubber on the boot. This isn’t possible with the leather replacement so I had to improvise.
[vodpod id=Video.15992323&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0092.mp4]
boot replace 3, posted with vodpod
Installed:
[vodpod id=Video.15992683&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0093.mp4]
Boot Replacement 6, posted with vodpod
So the boot and trim are in stalled, but of course you leave those ugly bolts sticking out. I originally thought that I would get some chrome bolts to replace, but they aren’t inexpensive as I found out when I replace my 1984 Corvette’s valve cover bolts with chrome…hey..they keep the chrome locked up at the local Ace Hardware!!! <<>> So since I still have to replace the carpeting (I could change my mind later about the bolts) I opted for some plastic chrome-like covers – they are actually cover for license plate screws. Here are a couple of pics:
Thanks for reading.
Tim
Tucker #1043. Photos courtesy Barrett-Jackson
The big Scottsdale auction week is finally here, now with six companies set to to drop the hammer on literally thousands of collector cars in a mere handful of days. In typical fashion, Barrett-Jackson was the first to usher cars through the stage lights, and it’s here where we’ve been alerted to the probable sale of this 1948 Tucker (chassis #1043) currently owned by none other than noted Barrett-Jackson attendee and enthusiastic car collector Ron Pratte.
Specific details about the Tucker are lacking, other than mention of its restoration, on Barrett-Jackson’s auction description. And we use the phrase “probable sale” simply because unlike most of the lots at B-J, the Tucker is listed as having an undisclosed reserve. That said, Mike Schutta of the Tucker Historical Foundation, provided more insight.
This car is very nice and most Tucker fans are keeping a close eye on this auction to see if it will set a new record price for a Tucker. The current record is $1,127,500 paid for Tucker #1045 about 18 months ago. This Tucker is in much better condition.
An interesting tidbit is that Tucker #1043 was used as part of an advertising scheme for a golf driving range in a western suburb of Chicago back in the ’50s. It was painted Tropical Rose and Snowshoe White to match the driving range buildings.
While surfing through the Barrett-Jackson website for more information on the Tucker, we stumbled upon four other Ron Pratte-owned vehicles that will also be offered at Westworld during the weekend, beginning with the car pictured above: the 1947 Bentley Mark VI with coachwork by Franay. The Bentley was last offered for sale by Barrett-Jackson – at no reserve – at their 2006 Palm Beach auction, where the hammer fell at $1,728,000 (including buyer’s premium). At that sale, details of the Bentley were as follows:
4.5 Liter Inline 6 with a four-speed. Coachbuilt by Franay. Magnificent restoration to Pebble Beach Concours d’Elegance winning standards. This is the first major winning Concours d’Elegance car after WWII. Winning the first two major Concours in 1948, back-to-back, on the 12th of June at Enghien and the 17th of June at Bois de Boulogne. Mr. Gudol, the original owner and visionary of the Franay, was an industrialist whose sole purpose was to prove to the world that France was not only back from the rigors of war, but ready to reassert its dominance of haute couture and automotive design elegance. The awards the Franay has won over the decades is proof of his timeless vision. Mr. Gudol, in his wisdom, continued to enhance and advance the performance capacity and design elements of the Franay to push the envelope of an ever improving competitive edge in Concours d’Elegance competition. Mr. Gary Wales, who has shepherded the Franay through over 50 major awards and honors since 1990, has scaled back the number of public appearances so that the car is currently eligible for any and all Concours d’Elegance events.
Like the Tucker, the Franay Bentley touts an undisclosed reserve.
Then there’s Pratte’s 1957 De Soto Adventurer convertible, again with an undisclosed reserve. Oft-repeated generic De Soto history aside, specific details provided by Barrett-Jackson state:
Powered by the famous 345/345hp Hemi V-8 with dual quads, an automatic transmission, push-button shifter on dash, and independent torsion bar front suspension. With the division’s top Hemi V-8 under the hood, the Adventurer was an early muscle car with a set of the most aesthetically pleasing tail fins ever seen on virtually any car.
The only two cars listed by Pratte without a reserve are this pair of 2007 Shelby GT500s, which are to be sold as a pair. Details per the auction site are identical for both Shelbys:
In January 2006 Ron Pratte bought the Ford Motor Company’s newest car, a 2007 Ford Shelby GT500 VIN 00001 that benefited Carroll Shelby’s Children’s Foundation. In the past, Ford reserved the first fifty cars produced for Ford family members and senior executives or by other people on a selective list. Ford was so grateful to Ron for his generosity, they offered him the opportunity to buy two more, VIN 00002 and VIN 00005. While Ron is keeping VIN 00001, he is selling the orange Coupe and matching convertible as a pair. The successful bidder will get both cars for one price. These cars are special in other ways as well, as part of the purchase of VIN 00001 was a trip to the Flat Rock assembly plant where these legendary cars are manufactured. At the end of the tour of the assembly plant, Ron was presented with the keys to VIN 00001, VIN 00002 and VIN 00005 by Carroll Shelby and Carroll autographed all three cars for Ron. Along with his cars were three other 2007 Shelby GT 5000′s, for Carroll Shelby, Steve Davis and Gary Bennett. Ron then threw Ford a curve and said he didn’t want any of these cars shipped by rail to the owners, he wanted them trucked, enclosed, to his facility in Chandler, Arizona, bypassing the traditional dealer delivery and inspections. All of the cars, including Carroll’s personal GT 500, were delivered to the respective owner this way. This is a unique opportunity to own two pieces of Shelby and Ford history.
Barrett-Jackson’s Scottsdale auction started Sunday and will run through this weekend. For more information, visit Barrett-Jackson.com.
So I’m read a few articles online and a few have touched on Fiat and all the issues they are apparently having with bring the brand back to the US. There are some individual that say the 500 won’t be back and that they tried too
soon or that they didn’t have any dealerships lined up to handle the turn. But I don’t really care much, I’ll never buy a Fiat, unless is an older classic, and then maybe….ummm…naaahh…not even then.
But I did notice that they are now offering a race ready version of the 500 Abarth. That’s right 160 hps of rubber melting power, not too bad when you are starting out with 101 hp. Drop a turbocharger and you’ll get 160. They
tuned the suspension for the track and its light curb weight might make it a bit fun to drive..might.
But the cool part is that included in the price is a ‘Track Day‘. Supposedly you will get (I think car will be available in the spring) a day at one of the Richard Petty Driving Experience events. What would be really cool is if you could return it right after that!!!
Anyway, I got to thinking if any other auto makers offer a track day. We all know that the Big Three are making track ready cars’ some for track only and some for street and track. Here is what I found out.
Fiat got the idea from Chrysler. They are offering a track day with the purchase of some of their SRT models (300 SRT8 and the Challenger SRT8).
GM via Cadillac offers their own at various tracks across the country.
Purchasing a Corvette ZR1 will get you a trip to Ron Fellows Performance Driving School or Bob Bundurant School of High Performance Driving, in Chandler, AZ. (OK….even you can’t afford the ZR1, sell the spouse’s daily driver, rent out your man cave (gal cave) and go to the Bundurant school.) They have a lot of classes at all levels and some fair prices. I did the Formula 1 event at Phoenix International Raceway (PIR) and it was outstanding. Here is a link: http://www.bondurant.com/?gclid=CJD93Luc2K0CFQduhwodNyU1mQ
Not to be out done Ford as a similar deal with the 2012 Boss Mustang. This is at the Miller Motorsports Park in Tooele, Utah. I chatted with one of the Miller Motorsports reps at the 2011 Barrett-Jackson Classic Car Auction in Scottsdale and he showed off some video of their facility and it is extremely nice. I’d make that trip.
If you got to have an “import” (and the Fiat ain’t doing it for ya) Mercedes-Benz will be offering a track day at course across the US if you purchase their top of the line models. (Although I didn’t find mention of which ones.)
So if you are going to spring for a new car, you’ve got some options if a Track Day is part of the deal. Of course the Fiat will run you about $22K and the ZR1 about $108K, tough choice?
Thanks for reading
Tim
I really like this car. These use to carry the moniker – California Special.
Ford released three pictures of the 2013 California Edition Mustang, which has traditionally been an appearance only package. They have not released an exact part list yet but the pictures speak wonders for what you will get, including the popular glass roof.
You can check out more 2013 Mustang pictures over in our photo gallery.