Welcome back to Average Guys Car Restoration.
Rear shocks required a bit of “extra” work to install and sadly a few of natures creatures, need to find a new home. Take a look:
#ProjectSports Roof now has all new shocks. There is still so much to do…coming up next brakes and upholstery.
Thanks for stopping by!!
Tim
Bill covers some tips and things to consider while he replaced the turn signal switch on #ProjectBeepBeep.
(Bill just didn’t want to be considered one of those “old” guys that leave the turn signal on!!!).
Good tips here!
Thanks for stopping by!!
Tim
Welcome back and thanks for checking in on Average Guys Car Restoration.
Here is the follow up to hinge installation for #ProjectBeepBeep, Bill’s 1968 RoadRunner. Bill discusses prep and process for paint your car’s hinges after installation.
If you are missing the previous episodes they are listed below this video.
Here a couple links to the previous episodes:
Project BeepBeep Gets Hinges – Prt 1
CLICK HERE
#ProjectBeepBeep – Gets Re-Hinged Part 2 – Curse of the Coyote!
CLICK HERE
#ProjectBeepBeep Door Hinge Replacement
CLICK HERE
THANKS FOR STOPPING BY A LOT MORE COMING UP WITH #PROJECTSPORTSROOF j(#SR73) and #ProjectBeepBeep.
Tim
Bill’s correct, the drivers door hinges on #ProjectSportsRoof are bad. But now that he has perfected the art of door hanging, I’ll borrow his expertise and this Rest Door Hanger for getting the Mustang’s door perfect!!!
 Well protected against damaging the paint |
 floor jack with cradle removed and door support tool the Steck EZ Rest Door Hanger |
Coming up Bill gives a few tips on painting your hinges.
Thanks for stopping by!!
Tim
I’ve finally put the fuel issues to bed with fuel line insulated, crushed line repaired, fuel pump upgraded and now a new carb. Through the process I’ve eliminated vapor lock – video proof showed the issue was with the carb float. Final analysis is that the float was cracked, filled with fuel and failed to control the level of fuel in the bowl.
Now the new carb is 1406 Edelbrock which is a downgrade from 800 CFM to 600 CFM (1413 Edelbrock). The #ProjectSportsRoof is running well. However, I don’t think I’ll leave it with the the 600. The 800 was in bad shape. Maybe only 60 miles on it, but it sat for too long, with bad fuel and just cleaning it up didn’t work. Some say the 800 is too much for the 351C but I noticed a difference between the two carb so the 800 it going back for a professional rebuild and it will end up back on the SportsRoof.
Here is the removal of the 800 and the installation of the 600.
Thanks for checking.
Tim
Here is a quick update on my 73 Mustang (#ProjectSportsRoof, #SR73):
Lots coming up so check back!
Tim
Well we’ve landed here temporarily with the vapor lock – not series of posts. Clearly we aren’t having a vapor lock issue and had I set up a camera much earlier I would have seen the issue pretty quickly.
With fuel spewing out of the carb, which isn’t ideal, we can narrow it down to a carb issue, not a fuel line getting to hot and not a fuel pump issue (but I’m glad I upgraded from the old one).
Here is the video of the float adjustment:
So my options at this point is to have carb rebuild or down size to 600CFM Edelbrock.
What would you do? Drop a not and let me know.
Thanks for checking in #ProjectSportsRoof.
Tim
Welcome back to #ProjectSportsRoof, my RARE (snicker) 1973 SportsRoof Mustang (#SR73).
I’m catching up on the fuel issue with my 351 Cleveland.
I didn’t notice but in the last posting at the very end of the video when I’m attempting to start the car there is an issue with the carb. I totally didn’t catch it at the time nor did I see it in the video.
I really struggled with trying get a video on the removal and installation of the new Speedmaster Fuel pump. One of the hazards of working on a ‘semi-cool’ car like my Mustang – outside in the driveway, is that neighbors love to peek in on the status and of course chat. The installation had some many interruptions that the video was choppy and salvageable. I had some misgivings about the Speedmaster pump, more exactly the lack of support – no instructions for adjusting the configuration(which required disassembly to accommodate different applications and no specs on the fittings required). I did managed to get few tips and the after math. Here’s what it looked like:
Thanks for checking in on #ProjectSportsRoof (#SR73).
Tim
Bill finished up the restoration and installation of his ’68 RoadRunner (#ProjectBeepBeep).
If you haven’t watched this group of videos, you should! When you do grab a notepad because there are tip in each one that make the restoration, easier, quicker and last longer.
Thanks for checking back!!
More coming up with #ProjectBeepBeep and more on my ’73 Mustang SportsRoof #ProjectSportsRoof (#SR73).
Thanks
Tim
As I sorted out the fuel issues with my ’73 Mustang (#ProjectSportsRoof) (#SR73) I was asked about the fuel system and what I used for reference.
I have all the manuals and specs with diagrams but the best I’ve found is from a a sales catalog. National Parts Depot has it laid out and labeled. You’ll have to excuse their SKU numbers but it’s a great resource.
Check it out: – OH I will have an update on the fuel issue coming up next, along with shocks and some other work being done on #SR73.
Hope this helps.
Thanks
Tim
