Chevy and it’s customer loved the Chevelle, the customers because of the low price and horse power, Chevy because of the sales. Now days a Chevelle is a highly sought after collector car. Finding a real good one is rare unless you want to play nearly a years salary.
Among those are clusters of the extremely rare. Within the production of the 1965 Chevelle there is an extremely rare version. That was the year Chevy took its brand new Mark IV 396 engine and hoisted it to the engine bay. It was the first of its kind (but not the last – the following year the 396 Chevelle became a regular model) with 375 hp and a 4 speed transmission. This was the special SS model of the Chevelle.
This was Code Z16 and only 201 1965’s were made with engine/transmission and trim, making this one of the rarest of the Chevelles SS.
It is 1922 and the car industry is moving right along. Small start-up car companies pop up here and there in the 1920’s.
Here is how they stacked up for 1922.
Top spot was Ford producing 1,147,028 cars.
Dodge was a very distant second with 152,653 car rolling off their assembly line.
Chevrolet ran in third place with 138,932 cars made.
And finish up the list were Buick with 123,152; Studebaker with 105,005; Williys-Overland with 95,410; Durant with 55,300 and finally Maxwell/Chalmers 44,811.
Total passenger cars produced were 2,274,185 with 269,991 truck being made.
Rickenbacker was a new upstart beginning production in 1922.
Durant produce a car priced at $319 . Ford reduced prices to $298.
Balloon tires were introduced.
Hey fuel gauges began being installed in dash in 1922.
1922 Durant Star - An attempt to undercut Ford's prices
I was just reading about the 2015 Mustang (yeah..they are planning it now) in the Oct 2011 Motor Trend.
It’s going to look great with a lower angled windshield and it will be lighter, but it will begin to lose it’s muscle car images, at least
underneath.
From the Motor Trend web site. 2-15 Mustang
The live axle will be gone, replaced with an independent rear suspension. Not really what you want to take to the track. There was talk that the live axle might live on in factory drag packs, but the tooling would be expensive and perhaps not cost-effective. We’ll see what actually happens.
Ford Live Axel
Independent Suspension.
But this is not focus of this blog entry. What I really want to mention was a side bar in the article. It is entitled “Icons on An Icon” “What should the next Mustang be?” Those interviewed were Jack Tenack who was a designer for Ford and global design vice president ( He actually drew the first proposal for the 1965 Mustang); Chris Theodore who was chief of Ford Motor Company’s North American product development (he left after a disagreement over the
suspension for the 2005 Mustang with Phil Martens); Tom Gale who had nothing to do with Ford at all, he was Chrysler design chief (now retired).
Generally Mr. Tenack stayed true to form, basically wanting small changes to the next issue of the Mustang, reinforcing the muscle car
image. He thinks all-wheel drive should be added as an option…that’s not horrible.
Mr.Theodore wants the new Mustang to have a 4 cyclinder…WHAT??? Yeah, get this, he’s like the V8 engines reserved for ‘specialty models”…can you say …hiss…boo??? “Hey, the 70’s called they want their paradigm back!!” Of course he led the charge to replace the live axle.
Mr. Gale thinks that we need to copy Europe and thinks the Mustang needs to be smaller. He says the Camaro is more similar to is predecessor then the Mustang is to its predecessor.
Drop me your thoughts. No V8? Live axle? Smaller ‘Stang?
As I’m sure you’ve heard or witnessed first-hand, Hurricane Irene threw her wrath against the eastern seaboard with initial landfall in North Carolina as a Category 1. Although predicted to be a Category 3 at landfall, this storm was still nothing less than a monster. This major hurricane realeased havoc from Myrtle Beach up to Maine as it churned along leaving major paths of destruction behind and massive amounts of rainfall. Power outages became widespread up the east coast, (includes my family in Pennsylvania at this current moment). Streams and creeks became raging rivers taking out roads, bridges, one being a 156-year-old hand-hewn bridge in upstate New York. It destroyed houses and stranded people in or away from their homes. Evacuated people are now stranded wondering the fate of their homes and personal belongings. Washed-out roads and bridges have left complete towns stranded without a way to get to or out like these towns in Vermont that have over 260 roads closed.
This storm has caused massive destruction and that has effected some of our own Mustang enthusiasts. Member, RobTRoma from PA, joked about getting a photo of his car next to a hurricane in our Mustang game thread. Featured above, what looks like a very nice ROUSH S-197 Mustang is sinking in a Subway parking lot in North Carolina during Irene’s throw-down. It almost has an ambience of Jaws coming out of the water before Roy Sheider exploded it.
When you work with and/or drive classic cars there is a never ending battle between old school and technology. Do I leave the points and condenser in or do I go all electronic? Do I update the suspension with coil-overs or go with stock suspension? Upgrade the interior to cloth or go with the vinyl? Many of us face those battles all the time. But there’s one clash between old and new that we just can’t to anything about and that is when new non-car technology clashes with old cars.
Back in ancient times the man went out to gather or kill something to bring home for dinner. That hasn’t changed much, especially in my household. Every week I strike out into the jungle to visit the local gatherers’ spot and cart home something for dinner. The only killing going on is my checking account balance.
Today was the day for our weekly shopping, so I fired up the ’70 Stang and headed out, ready for the hunt. After I was done scouting for “sales” and had enough provisions to last seven moons, the clerk (oh, they don’t call them that anymore…’associate’ is the correct term) took my hard earned provisions(HEY!!!..its tough shopping at the mega grocery – carts speeding around like herds of prehistoric lizards, tar pits of jelly on the floor, ill tempered rival tribes in the gourmet isle…yeah…it’s tough!!), stuffed them in to about 20 plastic bags and dumped it all into a cart. On the way out of the store a couple of clerks….excuse me…associates…said have a ‘nice day’ and ‘thank you’, as I tried to push the squared wheeled cart to the parking lot and my car.
As I popped open the trunk on the Mustang, I remembered the floor of this cavernous opening is covered with the new vinyl (original material) I installed a few months back and nothing else (I don’t carry a spare for drag strip purposes and it wouldn’t work with the tire size anyway). I looked at the contents of the squared wheeled cart and realized that by the time I got home, my gatherings will be all over the place, even if I didn’t drive like I normally do. If I tied them shut, the bags are still going slide everywhere, including into the quarter panel wells, creating a dripping plastic bag full of wine that just moments ago were grapes.
My next option was putting the bags inside, on the vinyl bench seat in the rear and the on front bucket set. Still the vinyl was going to let everything slide side to side and drop down on the floor.
Then I remembered back to when I shopped with my mother as a kid and the vinyl seats in our old Chevy Biscayne. The saving grace there were the old school paper bags that stood up straight and were packed heavy to stay in place. Their square shape allowed for the use of effective load master techniques that kept them on the seat or upright in the trunk. Then I thought,”I should have gone with the cloth over the vinyl.”
Some people are visual creatures and some are more in tune with the mechanics of life. I am a visual creature. The shape and colors of things are what I see first. So the whole idea of designing and drawing cars just fascinates me. Since this is a Mustang enthusiast website, thinking of what the next Mustang will look like is a mini obsession of mine.
Back in September of 2009, I started following a blog on the design of the new Mustang for 2014. And what appeared on that blog just blew me away.
Now I realize that Area 51 exists for more than just concealing a crashed alien space ship. It is also a test area for military vapor ware that we may see 20 years or so after it is new, you know, after it becomes obsolete and is no longer top secret. Well, getting a glimpse into the design studios of a major car company is like getting a tour of Area 51. You may see things that amaze and confuse and things you may have thought only existed in someone’s twisted imagination.
So how would it feel to get a whole truck load of sketches of the 2010 Mustang, drawn by one of the designers, just months after the new design was introduced? Yeah, it was pretty special. Rob Jensen was one of the designers of the 2010 Mustang, specifically, the GT500. Now, maybe you have seen these sketches before. Maybe they amazed and confused you back then, as they were way too “artsey” for a production car. But some parts and pieces of them made it onto the 2010 cars and some of them were left on the drawing board, literally.
For the Mustang Enthusiast in the crowd that leans towards the visual, stunning design side of cars, please enjoy the collection of sketches in our gallery below. Some are from Rob Jensen, some are from others on the Ford Mustang design team. Still others are designs by professional artists and amateurs that put together some very impressive Future ‘Stangs.
One thing to keep in mind, if you are seeing it here, out in the open, then most likely it looks absolutely nothing like the next Mustang will look. Think of this as the Area 51 Museum of Mustang design. If you like something you see, give the artist some love as I will try to provide links to as many of the artists as I can. If there is another artist out there that we need to know about, definitely put them in the comments or drop us a line.
I like off –beat cars. By that I mean, the ones nobody thinks about immediately. Some of those are cars like, Studebakers, Edsels, and Mercurys.
A few years ago, actually shortly after we moved to Tucson, AZ., I was at the local Safeway and I saw this black car moving through the
parking lot. I was on foot and I hurried to the end of the parking row to see if I could catch the manufacturer and
model. To my surprise that sports-roof-like, long black car was a Mercury Marauder!! It was beautiful. I’m still not sure what
year it was but I believe it was a 1969 and possibly an X-100, but I can’t be sure.
'69 Marauder
I’m not totally unfamiliar with Mercury’s, having lived with grandparents who for years would only buy
that Ford brand – mainly the Marques and other 4 door models. Frankly back then I wasn’t all that impressed.
But the Marauder, like the Cougar, wasn’t your grandparent’s car!
So coming up is my write-up on the Mercury Marauder.
I thought I’d take a minute finish up the write-up on the very first upholstery job. I finished it up a two weeks ago and really missed driving the Mustang, but that’s what happens when you do your own work and you can only fit it between all the normal life stuff that needs to get done.
Yes, as I was reminded twice by a couple of car acquaintances, I used a kit, some say they aren’t much different from slip covers, but as you can see in my shots here that’s a bit of an understatement.
Now these next two videos are not all that great but I think you can see the removal of the back and the fasteners. I’ve worked with these type of fasteners before in my father’s body shop (back in the early ’70s) nearly all door panels and seat back were fastened in that way. They work really well but bend them (and they do bend easy of they aren’t aligned with the hole and pressure is applied) and you’ll have to spend sometime reshaping them, even then they might not hold properly, or replace them.
Check out the videos:
Here are a few more photos and the finished product. Not to bad for my first one. I have the passenger’s side to do.
With the plastic seatback removed.
Needed to remove the back release
2 piece
release removed.
Helpful hint: All the hardware and fasteners have to pass through upholstery. Rather than try to cut holes, I made X cuts and pressed the screw or hardware through. This made it as tight as possible.
Markings on the Foam
Good shot of the cloth sleeve with the wire passed through.
Here you would pass the hog wire while in the hog-nose pliers through the cloth between the upholstery and the wire. You then have to shove this down between the two pieces of foam and grab a spring.
Finished product.
Replacing the seat track was done before I married the bottom and back. Placing it back in the car was a little tricky..until I figured out that moving the set on the track was the way to get the studs to drop back in to holes in the floor board.
Over all this was not as tough as I thought it would be. The passenger side will be quicker. I’ll post the final product on that side.
I was recently talking to a coworker of mine who own a 1949 Pontiac Silver Streak Delivery Van (link – http://wp.me/pKHNM-Bx ) and we were discussing his 6 volt system and the troubles with low amperage.
Well I just ran across a couple of interesting articles dealing with that subject. Now I will tell you I am not “the guy” for electrical work – nope not me (I had a bad experience – ok – a couple of bad ones). But even this one I can understand.
Increasing the power supply often means that you need to convert to 12 volt and maybe 15 years ago yes, but now 6 volts are readily available. So here is what you do (sorry no pics)
Take two 6 volt batters and link them in parallel by connecting the two negative terminals to each other and the two positive to each other. The main positive cable goes from the positive terminal of the first battery to ground and the main negative cable is connected to the negative terminal of the second battery. Of course in some case you may have to modify the batter shelf, but it will sure help kick up the cold cranking amps.
Folks seem to like this segment so let’s continue with 1950.
19 major car makers existed back then and Chevy topped the production totals with 1,498,590 units followed closely by Ford with 1, 208,912. The rest of the field were all less than have that.
