Project SportsRoof – Valve Noise Solved!

It’s been a while!!!!

Ya know, one would think that as you get older there’s more time for leisurely things.  But as second year teacher (at the age of “past 50”) and coaching our school’s basketball team there is no slowing down.  That’s my only excuse for not working much on Project SportsRoof.  Ok there’s one more….we’ve had a colder and wetter than normal winter.   This episode is purely due to “Spring Break” and having our taxes done (almost).

If you’ve followed along (did you know you can find Average Guy on YouTube as well?) you’ll know it’s been a long road with my 73 Mustang.  Multiple starts and stops, often caused by me exceeding my ‘Average Guy’s’ skill set and man power and even my car disappearing for a couple of weeks (but I found it).  Oh and don’t forget the tow truck driver that “broke” my front end!

Now SR73 (not SR71 the blackbird aircraft) or #ProjectSportsRoof is back on the road.  Having only driving about 30 miles since the engine rebuild, I noticed a lifter noise.  Not something you want to hear after all the time and $$ spent on it’s 351 C, in fact it’s a bit concerning.

The best place to start troubleshooting is to make sure the engine is getting the oil it needs.  That requires pulling the valve cover and running the engine.   Since I put the heads together myself, it’s a good idea to check the torque on the valves.  What better time to check that than when you have to take the valve covers off anyway?

Here is my quick video recap. There are a couple good tips in this one and here is a one more great tip. I can’t take credit for it because was shared with me sometime back. Should you have an old set of valve covers, cut the tops off to make viewing possible. That way when you let the car run (it’s the easiest way check if oil is flowing) the spraying oil is somewhat contained. You won’t see that in these videos….but you will see the mess it makes when you don’t use them!!!

Don’t forget to drop a comment, if you are so inclined.  Oh, if you have an event you’d like to tell other car peeps about, let me know and I’ll post it up!!

 

 



Follow Up: Reusing the old gasket!!



Thanks for visiting our site. You can find us on Facebook (search groups for Average Guy’s Car Restorations and Projects) and YouTube.

Tim

1973 Mustang – Project SportsRoof – Compression Test Part I

I’ve done all the clean up and all the adjustments necessary to get a good reading on the health of the ’72 351C engine in my 1973 Mustang. The next step is to check the compression. First up was to warm the car a bit and then pull the plugs. Here’s what the …

1973 Mustang – Project SportsRoof – Compression Test Part II

This is the wrap up on the compression testing for the 1973 Mustang w/ a 1972 351 Cleveland power plant. You’ll might have notices that I referred to the remote tester, which is my code for remote starter…yeah…that’s it!!! All of these tests were dry test and I should have done a …

1973 Mustang – Project SportsRoof – Compression, Rods and Heads

Thanks for check in on #ProjectSportsRoof. If you remember a of couple months back, shortly after bringing the ’73 Mustang home, I conducted a compression test on all the cylinders.  The 351C was running rough (to put it mildly) and smoked like a pile of tires on fire (only the smoke …

1973 Mustang – Project SportsRoof – Engine Bay Components.

I thought I’d take a minute and catch the readers up on #ProjectSportsRoof. I wanted to touch up some of the engine bay components, horns, vacuum canister and battery tray.  I didn’t want to alter some of these too much, I like having the numbers, logos and other info visible, not …

Bill’s ’68 RoadRunner #ProjectBeepBeep Brings Home a Trophy

Bill’s 68 RoadRunner takes First Place in local show, Best ’60’s Muscle Car!!!

It was a good show with some awesome 1960’s cars – GTO’s, Mustangs, Corvettes.

 


 

Congrats Bill!!!

Thanks for reading.  More coming up on #ProjectBeepBeep and #ProjectSportsRoof

Tim

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

73 Mustang (Project SportsRoof) Engine Dress Up and Venting/Vacuum

Did you think I sold #ProjectSportsRoof?  Nope.  I’ve been busy and I’ve been serving as editor to another cool project – my constant reader Bill’s ’68 Plymouth RoadRunner (#ProjectBeepBeep). However, I have been doing some work on the sports roof and in this video you’ll see a little bling under the …

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …

Corvette Mustang – Corvette Mustang – Then and Now

Over on Facebook one of the groups has a Then and Now series of posts.  That consisted of folk posting the cars they were driving 10 years ago and now.  I thought that was cool so I put quick clip together for my rides then and now.

For sometime now I have a Mustang Corvette combo, my  ’70 Mustang/84 Vette combo and my ’73 Mustang/’07 Vette combo.

 

Just a little trip down memory lane!!

Thanks for reading.

Tim

Project SportsRoof – 73 Mustang Update

Let me start out with a couple of pics of something most followers of my sight haven’t see in a couple years.

Project SportsRoof – not up on jack stands!!!!

The Stang getting a full tank….IN PERSON!!!!

It’s great to have it back on the road!!

As you know, I had a recommendation to have some work done on #ProjectSportsRoof. The story was this shop was expanding into Tucson and the son of the owner was going to run local ‘branch’. That was only 20% true. The son (for whatever reason) rented a bay from a garage here in town. Instead of paying rent he was going to do free repairs for the shop owner. Shortly after the Mustang was at the location, his deal with the owner went south and so did my car!!!

For two weeks I could not get hold of guy and when I showed up at the place he was supposed to be working, I was told they had no idea what was going on.  Shortening the story about 2 months, my car is finally returned to me.  Running great, but missing ‘stuff’.  You can see the that part of the story here:  https://wp.me/p2YxYx-5fK

BTW Twisted Addiction was the name of the shop and I still hear good things about the work they do in a town about 50 miles from here.  But my experience was beyond crappy!!!

After wrestling with the shifting lever I needed to get the car on the road (O.K. – more like a want) I turned to a unique garage.   They are unique not because they are one of a kind, in fact they are a chain.   They are unique because the owner/partner pushed the envelope on the range of cars he would allow his team to work on.   Work on older cars was  (and is) not part of the chain’s business model, and certainly helping out the locals on their old project cars wasn’t either.  But they did and with the new owner/partner, they’ve grandfather me and my project in.  They were there when I needed help on my current project.  From my 1970 Mustang to my 1984 Corvette and now with 73 Mustang (#ProjectSportsRoof) they didn’t hesitate.

I had the SportsRoof towed to the shop and the damage to the suspension wasn’t as bad as it could have been, but there was not need for it to occur.  You can see the story here: https://wp.me/p2YxYx-5hV.

I have the Mustang back and there was a mix of used and new parts added to fix the suspension damage.

And now I have it back and still stinging from the series of set backs, but happy to have it drivable again.  Here is a video update.

 




I am looking forward to finishing up the interior, some electoral,  dash components, heater/AC box, and more.  So check back.

Thanks for reading.

Tim

1973 Mustang Project SportsRoof – Exterior Walk-Around

Welcome back to #ProjectSportsRoof.  I run my car projects much like I run my IT projects.  You always have to know where to start and know the end game.   As with any project that isn’t being built from scratch, in other word, you have to work with what you’ve got, …

1973 Mustang – Project Sports Roof – Pertronix Ignitor Update

Well win some and you lose some.  If you’ve seen my other posts related the replacement of the points and condenser for the 351C you’ll notice that I gave conversion high marks.  This was all based on the years of use I got out of the conversion I did on …

Project SportsRoof – 73 Mustang – Suspension Damage.

So today the Mustang was going to make a quick trip the shop down the street to have the valve body put back in the transmission. The tow truck driver got the ‘Stang off-center on the flatbed and decided to winch it sideways. Only problem he wrapped the chain around the lower control arm. I was on the phone and heard a sickening snap. The bottom of the lower control arm is now facing the front of the car and you can see the rest here.  Video is below the pic.


Hoping the frame isn’t bent…but it might be. That would require some framework. If that doesn’t work then it might require a new front end.

Will update when I have news.

Thanks for reading.
Tim
#ProjectSportsRoof

1973 Mustang – Project SportsRoof – Compression Test Part I

I’ve done all the clean up and all the adjustments necessary to get a good reading on the health of the ’72 351C engine in my 1973 Mustang. The next step is to check the compression. First up was to warm the car a bit and then pull the plugs. Here’s what the …

Restoring Tach for 68 Road Runner – Project BeepBeep Part IV

Finishing up the rare Tach option project for #ProjectBeepBeep. Another great tip in this one.

Here are a couple photos of BeepBeep’s Tach:

 

Here is the wrap up video.


Thanks for reading!!

Tim

Restoring Tach for 68 Road Runner – Project BeepBeep

Bill gets “techie” in a “tachful” way as he restores the rare Tach option on his 68 Road Runner. #ProjectBeepBeep     More coming up!!! Thanks for reading!! Tim #ProjectBeepBeep #ProjectSportRoof Project BeepBeep – 68 RoadRunner – Body Bumpers Kit Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a …

Restoring Tach for 68 Road Runner – Project BeepBeep Part III

We are back with #ProjectBeepBeep. Bill continues give some great information on his MOPAR’s rare tach option.

There is a great section in the video with a great tip for protecting your electronic dashboard components.


Thanks for following the progress. Part IV coming up.

Tim
#ProjectBeepBeep
#ProjectSportsRoof

Restoring Tach for 68 Road Runner – Project BeepBeep Part II

Welcome back to Project BeepBeep. It’s been a bit of time since I posted the first part of Bill’s Tach project so here is a quick link to Part I and Part II is below.

Bill shares his diagnosis on #ProjectBeepBeep’s Tachometer.

Lots more coming up on Project BeepBeep’s tach.

Thanks for following along!!!

Tim

1968 Ply Road Runner
Project BeepBeep

Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels.

Take a look:

 

 

Great stuff!!!  Thanks Bill!!!

Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site.

Thanks for reading
Tim

 

 

 

 

 

 

 

 

Introducing …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep.

Bill is working on finishing up the brake conversion. Here is a progress update.

Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner.

If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.

 

 

Next up an …

Project SportsRoof Shifting Linkage Part IV

More work on my 73 Mustang’s shift lever. I have the pan off and removed the valve body. You can get a good look at the what needs to happen next.

 

 

Here is the bolt pattern for the valve.

The dots show the bolts to remove.

Over on www.7173Mustangs.com one of the experts modified a open end wrench like this:

We’ll see what I can find to remove this nut.  That will be coming up shortly.

Thanks for reading.

Tim

#ProjectSportsRoof

1973 Mustang – Project Sports Roof – Vacuum System Part II

Thanks for checking on #ProjectSportsRoof.   So here is the last set of initial questions. Here is an image of the current set up: Any diagram I find has the hose vacuum from the Distr going to the Valve assy. The Valve assy has nothing attached which is located on the front …
Project SportsRoof Shifting Linkage Part II

Thanks for checking back in on #ProjectSportsRoof.  My 73 Mustang doesn’t what to get it in gear so I have to troubleshoot the shifting linkage. For this round, I’m putting in new bushings to remove the slop when shifting. Here is the video: I’ll be tightening up the shift lever and linkage to …
Project SportsRoof Shifting Linkage Part III

Welcome back to Project Sports Roof (#ProjectSportsRoof).   The struggle is real!!! You saw in the last video my replacement of the linkage that was lost by the repair shop (along with my new battery and started).   This repair shone the light (as often happens with older cars) on a previous …
Wrenchin’ Tip – ’70 Mustang Transmission Swap

As I get ready to start the new round of mods for my 1970 Mustang Coupe, I’m reminded of a couple of issues that came up when I was assisting  a fellow Mustang owner doing a trans –  transplant. The first tip is partially dependent on what stage you are in …

 

Bill Overton – Angels Working Over Time (How I Survived Street Racing in the 1970’s)

Every now and then I see a good story on social media and I want to share it with my readers.  Bill Overton and I have been Facebook friends for a while now and I’ve been keep up with he and his wife’s struggles after the floods in Texas as well as some of his car projects and since I lived in Texas for about 8 years we sometimes share some Lone Star state antidotes.   He graciously allowed me to post one of his car stories and the pics below.  Thanks Bill!!!!

Earlier today I posted a thing about my brother’s V8 Vega. Several friends talked about that time when we had the cool cars. I got home and wrote this that I wanted to write for a while about my street racing days. Here is:

In the mid 1970’s I had a ’68 Camaro with several different engine and transmission combinations. Originally it had a 327 with a three-speed manual. I loved pulling the engine out to modify or drop in another one to see how fast I could go. I had a 396 Big Block with big valve 427 heads and four speed that really brought the Camaro to life. I loved driving fast. I loved street racing. I got the tickets to prove how much I loved it. Back then our real risk of street racing was losing our license for a few months, not like today where you can end up in jail and losing your car. I don’t recall there ever being a racing accident. I am sure there were, but I never heard of any.

This Bill’s 68 Camaro.

Friday and Saturday nights, I would go cruising Palmer in Texas City looking for a race. I had several other friends who would do the same. Other weekends I would cruise Clear Lake. Usually on Bay Area out by the High School is where we would end up racing. Most times I would race someone I knew but there were many times I would get challenged by a Mustang or Charger that was someone I never met before. I shied away from racing a Corvettes but occasionally, I would challenge one. The common tradition was if you lost, you had to give the winner your shifter handle. I had a small box on the floor behind the driver’s seat full of shifter knobs and handles, mostly Mustangs. I lost several of my Hurst T Handles occasionally.

The races I enjoyed the most was some kid would be out in his new Trans Am or Camaro. These were factory stock, but the owners believed they were the best of the best. Some of the big block Trans Ams held their own, but for the most part they were easy pickings. I recall one time I was on Palmer sitting at the light at 146 going west. A new Trans Am with an automatic started to challenge me. On this part of the road, as you leave the light you go up and over an overpass not too far from leaving the light. The light turned green and the Trans Am got the jump on me. I got even with him when I hit second. When I hit third, I started to walk away from him. At this point we were started to go down the other side of the over pass. Then suddenly, he disappeared, like he hit his brakes. I could see him in my mirror, so I pulled over. He was sitting on the shoulder. I backed up on the shoulder to see if he was ok. Turns out that when he saw me pulling away from him, he threw his transmission into park. I guess subconsciously he was thinking he had to shift. I looked under his car and saw transmission fluid draining out. I told him he could keep his shifter handle. He gave me an odd look, I guess he was not aware of the tradition. I never found out what ended up with him, I guess he was in real trouble when he got home.

Another time while cruising Palmer there was a ’63 Nova that had a straight axle. It was mean looking. I could see fender well headers, so he meant business. At the light I looked over at him and he was an older guy with his wife and kids. I thought that was sort of strange. He was challenging me, so I got ready. When the light turned green I got him on the jump. He could not catch up once I pulled away, so I won the race. After a race we would end up meeting up at a shopping center parking lot. When he pulled in he had his window down and handed me his shifter handle as he slowly went by, he did not stop. I felt sorry for him since his family was with him. Since I was 18 years old, I perceived him as an old guy, but, he was probably about 30 years old. I could imagine the conversation in the car after the race.

I remember hearing that the Texas City Police got motorcycles to help catch street racers, so I did not go there much after that. I went into Houston. Problem with going to the city is the racing was fast on the freeways. Back then the traffic was almost nonexistent compared to today. I remember one time taking the I-45 north to 610 west exit which was a turning single lane bridge at 120 mph. I did not feel like it was dangerous but looking back I was very lucky I did not go off that bridge. There were several other times that were like this. I know angels were watching over me even though at the time I felt invincible.

One time late at night I had just installed something in the Camaro, I really don’t recall what, but I was out for a test drive. The streets were empty, so I stopped, ran the RPMs up and dumped the clutch. The car was running like a beast, every gear pulled strong. Then suddenly there was something reflecting back at me in the middle of the road. My thought was some kid was standing in the road just watching me come towards him and he was not moving out of the way. I slammed on the brakes and went right off the road. Where I left the road was on a driveway and immediately I went airborne off the culvert. I was going down the shallow ditch when the next driveway was right in front of me, so I steered left back onto the road. My right-side traction bar caught in the dirt on the side of the driveway and I spun out in the road where I came to a stop. I sat there for a second, then looked to see what was in the road. A Great Dane was staring at me wondering what the deal was. I saw a porch light come on, so I put the car back in gear and drove off. The next day I went back to see where I went off the road. You could see the tire tracks and I followed them from where I left the first driveway. I was airborne for about 20 feet where the tire tracks started in the grass. I was shocked to see that I had missed a telephone pole by inches. This was the point where I saw how lucky I was.

Fast forward to 1985. I had just bought the Corvette I still have. I did not modify it very much, so I was not out looking for a race. I was just enjoying driving at night through downtown Houston with the T-Tops off. I was at a stop light just about to leave downtown heading west on Memorial. A Porsche 911 Carrera challenged me to a race. I knew I really did not have a chance, but no one was around this time of night so what the heck. The light turned green and off we were. We were staying side by side, I thought the Porsche would have walked away from me. Next thing I knew, there were the familiar lights behind us wanting us to pull over. I slowed down and pulled over ready to get the massive ticket. The Porsche kept going. The Officer walked up to the Vette, I handed him my license. He asked did I know the guy in the Porsche. I said I did not, that was the first time I saw him. The Officer gave me my license back and told me to slow down and he left. I sat there in shock, I just got off lucky! That was the very last time I raced someone on the street. I got back on the road to head to my townhouse where I lived at the time and as I rounded the bend on Memorial I saw several police cars behind the Porsche and the guy was spread eagle on the side of his car and they were searching him. I guess one of the Police was waiting at the curve for him. I drove past just ten mph under the speed limit. I have always wondered if they had been watching him for other reasons and maybe this was the thing to haul him in. I will never know but am thankful that I was let go. Another time Angels were watching over me.

I swore I would not talk about these events until my kids were over 20 years old, so they would not get the idea of doing something like this. Both my kids are very careful drivers, they get that from their Mom. Looking back, I have fond memories of driving and modifying muscle cars that young people today will never experience. Back then I could buy and modify a 1st generation Camaro for what I made mowing lawns. Now you can’t get one of those cars without a huge bank loan. I am sure I wore out an Angel or two. I never put a scratch on a car, so I know the Angels were busy watching over me.

Bill and his wife Jennifer.

Thanks again Bill for allowing me to share this story.  I hope the Angels are always working over-time for the Overtons!!!!

Thanks for reading.

Tim