C6 performance convertible and its 60th Anniversary Package will be unveiled at Barrett-Jackson, where the first public version will be auctioned off for charity.
Some features:
The 427-cubic-inch (7.0L) LS7 engine is from the Corvette Z06. Rated at 505 horsepower and 470 lb.-ft. of torque. The 427 Convertible is only available with a six-speed manual transmission.
The LS7 was co-developed with the Corvette Le Mans-winning GT1 engine with:
– lightweight titanium connecting rods and intake valves
– racing-inspired high-flow cylinder heads
– a dry-sump oiling system
Suspension/Brakes/Wheels
– the same driveline and rear axle system as the Corvette Z06
– Magnetic Selective Ride Control
– 19-inch front and 20-inch rear lightweight machine-face Cup wheels
– PDE performance packages – come standard and include unique gray-painted pockets.
– a rear-mounted battery
The 427 Convertible Body has:
– Carbon fiber raised hood (introduced on the 2011 Z06 Carbon Edition)
– Carbon fiber Z06-style fenders
– Carbon fiber floor panels
– The “CFZ” carbon fiber front splitter and rocker panels
Weight:
427 Convertible’s curb weight to 3,355 pounds.
Other specs:
– 505-horsepower LS7 engine, it gives the 427 Convertible a power-to-weight ratio of 6.64 – or one horsepower for every 6.64 pounds of vehicle mass
– one of the fastest convertibles in the world, delivering estimated 0-60 performance of 3.8 seconds, quarter-mile performance of 11.8 seconds, lateral acceleration of 1.04 g and a top speed of more than 190mph.
Since I’ve gotten the 4 speed ( T-10 from 1967 Shelby) in the Mustang, I’ve been driving it a lot more. I’m surprised at how much of an improvement it has made in the drive ability. Of course there is more power going to the ground which is remarkable and the RPMs are put to much better used. The original three speed top out pretty quickly and nothing left but engine noise.
Of course with more power hitting the ground, my current tires (wide and hard) tend to grip a lot less and spinning them through 2nd gear is common. That will required some new, softer tread before long.
After driving the Mustang a few days in a row, I took the Vette to work. Now you would expect there to be a difference, especially with the 120 hp disparagement in power the Vette (about 420) and the Stang (about 300 – maybe a bit less) , but what I notice is how both cars arrive at top speed.
Both car’s like to launch, but the Vette does so with much less rear hunching then the Mustang. The Vette feels lighter as it gets up to power – less down force on the road. The Mustang is much different. You can feel it, feeling the road. I can actually feel the power longer and deeper in the Mustang as it move on up through the RMPs and the gears.
I think I’m ready to at a tach to the Mustang, I need to see the RPMs it’s turning out and then I’m going to have it dyno’ed. It will be a good baseline before I get the 351 CJ head and intake installed.
Barrett-Jackson‘s upcoming Scottsdale event later this month is shaping up to be an exciting affair, with all sorts of classic and modern hardware crossing the block. One of the latest to join the party is the SMS-Bondurant Camaro.
Presented by Steve Saleen and Bob Bondurant, the special SMS supercharged 6.2-liter V-8 Camaro gets a rating of 620 horsepower, 570 lb-ft of torque, a six-speed manual transmission, Borla exhaust, “Red Butterfly” hood, Eibach S suspension, custom 20-inch SMS wheels, and the autographs of both Saleen and Bondurant on the dash.
It’s production car #001 of the new collaboration, and it’ll be auctioned to benefit the Make A Wish and COX Charities foundations.
I hope you can view this article. Has some great cars – although the saying “keep the shiny side up” doesn’t really translate – these just don’t have one.
I’d love to spend time wandering around Cuba, just to look at the cars.
Well, I’m officially depressed. No it’s not because of the holidays, or the rapidly approaching June when I’ll move too far into the 50’s to be able to fool myself that I’m just barely 50, nope none of those things.
I’m looking at GM’s (bastards!!) Performance Catalog and all the shiny things in it. Like the ported LS3 heads, and the LS376 – 525…yes 525 hp in a crate engine, drop in and drive. I realize two things, I need an older Chevy to play with (or upgrade the C6 Vette) and that I’ll need a second job if I even want to touch any of this stuff and where will I live when the better half finds this stuff laying around the garage? (Tell me you aren’t depressed now?!?!!…It’s ok…admin it!!!)
Note: It’s gonna get worse… I have the Ford performance parts catalog as well…all I can say is thank GOD!!! I don’t have a Morpar to drive around….oh….the therapy…bills….!!! Why, OH Why didn’t I drink the family KoolAide when I was a kid..I would have been able to shun the Fords and Mopars and just be a normal one brand car guy??
There is some awesome stuff the Chevrolet Performance Team is put out, everything from small block crates to LSX monsters, to circle track crate engines.
Over the next few post I’m going to cover a few highlights and a couple unexpected – like engines for the Chevy Cobalt and some V6 engines. (Have just read some specs for the upcoming 2013 Mustang V6 – I want to see what Chevy’s got.)
In fact let’s start with something off the wall. Like the 900 V6 Intake for a 4 barrel carb!! What???!!!! It’s an aluminum high-performance for the 3.8 or 4.3 liter V6. So go ahead bolt on that 390 cfm carb..oh heck….grab that 600 cfm 4150 and drop it on top.
That is not a bad price. Of course it’s not for all heads, like it won’t fit the 3800 V6 or the 18 degree heads and you might have add a bump to your hood for clearance!!!
The world’s most significant all-Corvette show is moving back to central Illinois. After nearly a decade of being held at the Pheasant Run Resort in St. Charles, Bloomington Gold will be moving about 115 miles south to the town of Champaign for 2013, near where it first began nearly four decades ago.
According to Bloomington Gold CEO, David Burroughs, “Although it will be hard to beat the beautiful fairways of Pheasant Run, input from Corvette-owning customers wanted more opportunity for socializing and driving events as part of the entire Corvette show experience. It needed to become more dynamic.”
David went on to say: “Our customers own Corvettes because they are fun to drive. So, we needed a venue that not only served our exhibitors and customers who buy/sell and certify Corvettes, but also a venue that makes it easy and fun to navigate to/from and around the community before, during, and after the show. Therefore, we needed a small-town atmosphere with big-town hotels, great facilities, and quick escape routes to miles of country roads. Champaign, Illinois, has the smaller-town atmosphere, and the University of Illinois Assembly Hall grounds have everything else.”
So mark your calendar for June 27-30, 2013. Not only will this be the first year for the new venue, but it will also be the show’s 40th anniversary. And if you’ve ever attended one of the Bloomington Gold shows, you’ll know that there’s something very special planned that every Corvette enthusiast will not want to miss. In the meantime, the 2012 edition of Bloomington Gold will remain in St. Charles and take place June 21-24. For more information, visit BloomingtonGold.com.
I just recently picked up a copy of GMs new Performance catalog and all I can say is WOW!! But we’ll dive into that in a future post.
Gracing the cover was the latest and greatest COPO Camaro. You remember those special order packages. Well they have brought it back and factory racing just jumped up and shouted “LET DO IT!!!!” [vodpod id=Video.15839761&w=425&h=350&fv=%26rel%3D0%26border%3D0%26]
Tough finding something historic for this week in May.
I do have a blurb on GM.
On May 10, 1923 they named Alfred P. Sloan as corporate president. They didn’t just pick from the streets. He was actually, a draftsman for a bearing company, Hyatt Roller Bearing. That company eventually merged with a few other companies with United Motor Corporation. Sloan became the president of that and shortly after that they were purchased by GM.
He served GM from 1923 to 1956 in some manner including board chairman.
January 6th, 2012 
aunik_aronno
