More on Story of the Plymouth Cricket

Bill Burdette submitted this great information:

There is a bit more to the story of the Cricket. Chrysler thought that since GM had purchased Holden and Adam Opel, they should do a ‘me too’ and buy the Rootes group. This consisted of Talbot, Hillman, Simca, and Sunbeam.

The reality is Chrysler was left with a Dog of a car company. They thought the Cricket might catch on due to its image as a gas miser, but it really wasn’t too great on MPG. The build quality was awful, and customers found that the other MOPAR ‘captive import’, the Dodge Colt built by Mitsubishi, was a terrific car with great MPG, and priced a bit cheaper.

One great thing did evolve from the Rootes group for Chrysler; the Dodge Omni and Plymouth Horizon. These were billed as America’s first FWD 4 cylinder car that could compete with imports. Basically, it was a Talbot Horizon that had been on the market in the UK for many years. Chrysler did do dome re-engineering for the US market by adding a FWD version of the bullet proof Torque Flite auto trans (A413), and used VW Rabbit 1.7l 4 cylinder engines rather than the ‘shake and bake’ Peugeot motor in the UK version. Omni and Horizons were a hit, and reasonably reliable (my first new car was a 1982 Horizon TC3 that was reliable to 120K miles and then fell apart).

Lee Iacocca ended up giving the Rootes group away to Peugeot in the late 1970s in exchange for some stock and 4 cylinder engines for the Europe marketed MOPARs.

I’ll stop here so I do not go onto the era of the great K CARs HA HA.

 

 THANKS BILL!

Terrible Transportation – Plymouth Cricket

Oh yes this will be an interesting series.

We are going to start of with a well-meant attempt by Chrysler to meet the oil crises  from 1973 to 1980.  Introducing the Cricket!!!!

1973 Cricket

This car was actually  a US spec’ed Hillman Avenger.

It featured the Avenger’s 1.6 liter pushrod engine.  This car’s top speed was 84 mph and took a merely 19.8 seconds to get to 60 mph (I bet you were thinking 100 mph!!).

The car was horrible slow and because it was detuned for as part of the US requirements it ran poorly.

Here some of it features:

– Quick Rust fenders and body parts

– PVC coated foam interior for safety

You are going to want one after you see this ad:

[vodpod id=Video.15696452&w=425&h=350&fv=%26rel%3D0%26border%3D0%26]

The Plymouth Cricket, posted withvodpod
s

Thanks for reading.

Tim

It Doesn’t Matter what you Drive…

…if you  love it.

One of my readers sent me the video below.  It’s the second in a series of 3 of a California K-Car club, headed out for car-a-van.  Now generally the Chrysler K-Car was and is a but of many jokes.  It wasn’t their best plan but these cars have a following.

I’ve gone on similar runs with my Vette and Mustang, same amount of planning, etc, ( we just get there a ‘bit’ faster –  :^P).   This video show that it’s true…It doesn’t matter what you drive…if you love it.
425px;margin:0 auto;”>  [vodpod id=Video.15330551&w=425&h=350&fv=%26rel%3D0%26border%3D0%26]

     KCar Club, posted with vodpod

You guys are rocking with your K-Car enthusiasm.

Thanks for reading.

Tim

Car Production Numbers. They Made How Many? 1961

For this entry let’s visit 1961.

There were 17 auto makers that year.  The race for production numbers show Ford and Chevy nearly tied.

Ford – 1,338,790

Chevy – 1,318,014

Not even close in third place was Rambler  with a total 377,902

Here are the rest of the companies placed:

Plymouth – 356,257

Pontiac – 340,635

Oldsmobile – 317,548

Mercury – 317,351

Buick – 276,754

Dodge – 269,367

Cadillac – 138,379

Chrysler – 96,454

Studebaker – 59,713

Lincoln – 25,164

DeSoto – 3,034

Metropolitan – 969

Checker – 860 regular automobiles (non-cabs)

Some Notable Notes:

– Studebaker added a four speed option for its Hawk offering

– In the chassis lubrication war Ford produced pre-lubed, 30,000 miles grease fitting and Cadillacs offered lifetime lubrication.

Know what a Fitch GT was?    Let me know and win free gift.

 

1961 Dodge Dart Pioneer Station Wagon

 

1961 Rambler Cross Country Wagon

 

Thanks for reading.

Tim

Wrenchin’ Tip – Got 6 Volts?

I was recently talking to a coworker of mine who own a 1949 Pontiac Silver Streak Delivery Van (link –     http://wp.me/pKHNM-Bx ) and we were discussing his 6 volt system and the troubles with low amperage.

Well I just ran across a couple of interesting articles dealing with that subject.  Now I will tell you I am not “the guy” for electrical work – nope not me (I had a bad experience – ok – a couple of bad ones).  But even this one I can understand.

Increasing the power supply often means that you need to convert to 12 volt and maybe 15 years ago yes, but now 6 volts are readily available.  So here is what you do (sorry no pics)

Take two 6 volt batters and link them in parallel by connecting the two negative terminals to each other and the two positive to each other. The main positive cable goes from the positive terminal of the first battery to ground and the main negative cable is connected to the negative terminal of the second battery.  Of course in some case you may have to modify the batter shelf, but it will sure help kick up the cold cranking amps.

Thanks for reading

Tim

Car Production Numbers. They Made How Many? 1950

Folks seem to like this segment so let’s continue with 1950.

19 major car makers existed back then and Chevy topped the production totals with 1,498,590 units followed closely by Ford with 1, 208,912.  The rest of the field were all less than have that.

Plymouth – 610,954

Buick – 588,439

Pontiac – 466,429

Olds – 408,060

Dodge – 341,797

Studebaker – 320,884  (Don’t ya wish they would have made it?  I would love to have seen their innovation continue.)

Mercury – 293,658

Chrysler – 179,299

Nash – 171,782

DeSoto – 136,203

Hudson – 121,408

Cadillac – 103,857

Packard – 42,627

Lincoln – 28,190

Kaiser – 15,228

Croslely – 6,792

Frazer – 3,700

Of note:

This was the last year for the Old 6 cylinder 76 models, while their Rocket  88 set speed records at Daytona – averaging 100.28 mph.

Packard began selling the only automatic transmission ever developed by an independent car maker.

The Rocket 88 - record setter.

 

Can a pick a Frazer out of a line up?  Me either. Here’s one.

1950 Frazer Manhattan Convertible

How about a Crosley?  Yeah I could do that one.

Crosley Hot Spot - circa 1950

And what did a automatic transmission look like in 1949?  Here is the Packards Ultramatic.

The looked a lot like todays automatic transmissions

 

Thanks for reading.

Tim

Product Review – Griot’s Garage – Long Lasting Tire Dressing Closure

So you’ve read my review and I promised to drop a note as to the “Long Lasting” part of Griot’s Garage’s – Long Lasting Tire Dressing.

Now is has rained nearly every day since I applied the dressing.

So take a look at the tires with 2 applications and 3 applications.

Tires with 2 applications of tire dressing

 

Here is the tire with 3 applications of tire dressing

 

Here is what I think as a wrap up.   Long lasting to me doesn’t necessarily mean just duration, but can it stand up to everyday driving – oh—yeah…just in case I failed to mention, the  Vette is my daily driver.  It lived up to the Griot promise.  I’ll continue using this product.

Thanks for reading

Tim

 

Tanner 67 Camaro

A readers’ trip to the drag strip. Tanner Dutton making a pass in his 67 Camaro.  It was an 11.5 pass.  Not too shabby  Tanner.

[vodpod id=Video.13806343&w=425&h=350&fv=%26rel%3D0%26border%3D0%26]

Tanners's Camaro at rest. (That is not Tanner in the pic)

Readers Question – Swings in Oil Pressure.

From Michael Woodword – hey, I just got a 1993 thunderbird with a 5.0 HO. every time I come to a stop, the oil pressure drops dramatically. I was wanting to know if you would have any idea what could cause this. Thank You
But when I get back up to speed its fine.
It would be nice to get an opinion from an expert which ar
nt easy to find

 

ANSWER:   Michael. The pressure should drop when you stop, dramatic swings in the gauge could be a problem with the gauge or you need replace your oil sending unit.