I've been fiddling a bit with the Vette. I have a few projects to do now that I've become a lot more familiar with the car in the last two and a half months.
Although the car sounds cool, the cheap aftermarket mufflers are completely rusted inside. The baffles are all loose with lots of holes. On the outside they look new. They are the source of most of the rattles.
The lumbar supports on the sport seats don't work. I can't hear the pumps run so inspecting electrics first on those.
Rear speaker amps are toast. Expensive so it's not high on the list.
Steve’s 1990 C4
Tranny service due. No biggie and not expensive.
PRNDL lights are out. Not bad considering it's 22 years old and all other lights work. I was amazed at the sheer number of lights inside. Courtesy lights and mood lighting. The interior alone must have 15 individual lights.
Drivers side headlight motor needs to be repaired. It works most of the time. LOL.
It's a pretty short list considering the age.
It pretty much sits in the garage. We are in the 100's (110 today) this week so it's morning and evening use. The ac does not work but it still has the factory seals on the service ports so I'm hoping for good news there. We do have R12 available here. I unbolted the roof when I got it and it hasn't been back on since. I always wanted a convertible and the coupe is a good compromise.
The most annoying thing about the car is the static electricity. It doesn't shock me or anything but dust sticks to it like glue and the California duster only moves it from place to place. I never thought about a "plastic" body in that way. The duster works just fine on my steel cars.
Listen if it’s a Corvette and you want to make it go faster…I’m fine with that. Who cares, why you want to make it go faster?
From http://www.corvetteonline.com
What would possess someone to create a Corvette with over 2,200 horsepower? Does it really matter? With an amazing feat like that, we didn’t think so. Take a look at the unbelievable Top Speed C5 Z06 that has over three times the amount of horsepower as a modern ZR1 at the April Ohio Mile event in the Wyldfantasies Media Studios video above.
Built by Hinson Motorsports, “Record Hunter” is among the most powerful Corvettes we’ve ever seen and there’s reason for that. Bringing the car to its astounding 2,246 HP rating at 7,800 RPM is a massive build the crew completed back in March.
Under the car’s hood you’ll find a 427 cubic inch RHS Aluminum Tall Deck Block assembled and machined by Butler Performance. Stuffed inside this block are aluminum connecting rods, Diamond pistons and a Callies Ultra Center Counter Weight Billet Camshaft, as well as a custom high capacity oil pan from Doug Lee Engineuity.
Making up the engine’s top end are TEA-ported Trick Flow 245cc heads, Crower roller rocker arms, COMP Cam pushrods, a custom COMP solid roller camshaft and a GM EFI carb-style intake manifold. But these components alone aren’t what gives Record Hunter its massive amount of horsepower.
That extra boost comes from an intricate custom turbocharger system featuring a 118mm turbo, custom air to water intercooler, Tial wastegate and blow off valves, and a 5-inch downpipe all working to the tune of 34 PSI manifold pressure.
Of course, a build like this makes for extra fuel needs, which the team has dialed in using a Holley Dominator EFI system and Bosch 160 pound-per-hour injectors, as well as a regulator and fuel pumps from Fuelab.
The whole build is backed by a RPM-built TR6060 transmission with a SPEC twin disc clutch and an RPM ZR1 differential with Quaife LSD.
Surprisingly, the Corvette looks relatively like the C5 production car it started out as, minus the modified hood, roll cage and custom adjustable rear wing, of course. But obviously, looks can be deceiving. And 18-inch wheels from True Forged Wheels wrapped in Hoosier R6 rubber make sure that as much of Record Hunter’s power as possible is delivered successfully to the ground to turn heads like no other C5 can do.
After completing the build in March, the Hinson Motorsports crew took Record Hunter to the Ohio Mile, an East Coast Timing Association event in Wilmington, Ohio on April 29th to see what it could do. As the first standing mile event the Corvette raced at since its build, the April Ohio Mile proved to be a great tuning opportunity for the crew since the mile race was speed-limited to 150 MPH.
It may not look too far off from stock, but Record Hunter packs nearly 2,000 more horsepower than a stock C5 Z06.
As the car’s name suggests, future goals for Record Hunter are to set new standing mile records. With a car potentially capable of topping out at over 250 MPH, we’re sure Hinson Motorsports will be making history with the car this season. Be sure to watch out for Record Hunter at any of the standing mile events this year. To check out some in-car footage of the first standing mile pass the Corvette did since its build, watch the video below.
It’s nearing the peak of summer, which means 2013 model year cars are only weeks away from being released. But before we can welcome in the last of the C6 models for next year, we owe it to the 2012′s to take a look back and see just how well the Corvette did this year. So here are some of the production numbers for the Corvette’s 2012 model year compliments of CorvetteBlogger, and some of them may just surprise you.
Just like in the 2010 and 2011 model years, the Grand Sport got the most amount of buys for 2012. Between the Grand Sport coupe (5,056 sold) and the GS convertible (2,268 sold) , the model made up nearly 63 percent of all Corvette sales. Coming in at a far second, was the base model with 2,820 coupes and just 651 convertibles sold to make up 29.5 percent of Corvette sales.
As far as the high-rolling Z06 and ZR1′s go, only 478 Z06 models were sold, making up 4.1 percent of total sales, and only a measly 404 ZR1′s were sold, making up just 3.5 percent of sales. In total, 11,647 Corvettes were manufactured for the 2012 model year.
Not surprisingly, the most popular color among the 2012 models was Torch Red with 19.5 percent of Corvettes sold sporting the color. The vibrant shade was closely followed by the Carbon Flash Metallic paint of the special Centennial Edition cars. Nearly 19 percent of Corvettes sold featured the special edition package.
Other interesting tidbits we found browsing through the 2012 production numbers were that 62.3 percent of Corvettes were sold with Ebony interiors while only 88 were sold with yellow stitching accents and 105 sold with blue stitching accents.
Option packages appear to have been popular with 2,416 Corvettes sold with the 1LT option package, 1,691 sold with the 2LT package, and 5,510, or 47.3 percent, sold with the 3LT package.
For more of the 2012 model year numbers, check out the full report from CorvetteBlogger.com.
Remember a few post ago that covered MOPAR’s in Sweden? (Short Link: http://wp.me/pKHNM-174) I wrote how interesting it was to see US sheet metal in other countries.
Well check out this car show in Rothrist, Switzerland. This is from Andres Palomares who lives in Bern, Switzerland. There are some great examples of US car history in this show.
Switzerland is beautiful and visited Interlaken several times while living in Europe.
Well another reader (long time reader) has gone where few dare to tread. Yes I’m talking a Ford car guy, a Thunderbird owner and former owner of a very cool Mercury Cougar wagon, is now a proud owner of a 1990 C4 Corvette!!!!
It’s a great looking Steve!!!!!!
Steve’s White C4
It’s in great shape and I am liking the wheels!!!
I’m sharing this Steve!!!!
Tim,
As a Ford guy I guess I’ve come over to the dark side.
I bought a 1990 standard Corvette with all the sporty stuff. Seats, suspension and all the electronic gizmos.
Super well cared for condition with all maintenance history since new. I does have a worn right muffler cushion.
Last evening was my first ride ever in a Corvette and of course I was driving. Rides rougher than a cob on a rough road as expected. It also makes all the cool dual exhaust music. Two tops, one glass and more switches and gauges than I’ve ever seen before. No deterioration of the interior or paint so it must have been garaged. It also has a fine sounding Bose system which was standard I think. I did find a 1/8″ chip on the drivers front fender.
Yup, I’m on the dark side and was wooed by the devil himself to get me in a Chevy….. We have some streets in various stages of reverting to dirt here. Some very rough streets. The right muffle mount is collapsed (rubber) so it rattles. Roof panel does not rattle at all.
It’s in quite good condition for 22 years old. No interior or exterior work required.
It runs sooooo good. I think it may have never been driven in the rain. Underneath looks new, no tarnishing of the aluminum suspension bits.
The PO provided replacement “dew wipes” for the doors and a new power antenna that’s to replace the one that is stuck up. Please don’t tell me I have to remove the rear fascia to replace the antenna. LOL.
I did manage to scare myself a bit last Saturday. I’m not used to a posi-trac rear end…Ha Ha. Just a little sideways. It sure accelerates quicker than expected for only 245 horses. I’m averaging high 17’s around town which actually is unexpected. I guess the trick is 345 lbft or torque……..”
Thanks for sharing your Vette Steve…..NOW LETS TALK ABOUT SOME MODs!!!
First I really liked this striping on this ’77 Vette.
Look closely at the next few photos the stripe moves from dark to almost white.
Oh...and the stance on this is just extraordinary!
One more 77 .
One on looker called this a plain jane Vette, I told him there's no such thing!!!
Here are the 50’s era Vettes.
A little video clip…I didn’t add the music.
And the 60’s Vettes. The silver 63 is Steve Fagan’s. Owner of Hot Rods and Classics, located here in Tucson. They do great work including a lot of my engine work for the Mustang, which helped me win my First Car Show Trophy!! His Corvette has taken two trophies in the last two shows.
You know the feeling. When you JUST have to take ‘her’ out for a spin – no matter the condition.
You can’t see in this pic, but there’s no hood, no t-tops and lots of body work to be done….. but great looking rims and new meat (tires)…it was running a bit rough but still sounded good!!!
Got an unfinished project but still take it for a spin. Post up a note and a pic.
Steve’s White C4
It’s in great shape and I am liking the wheels!!!
