Category Archives: Classic Cars

Plymouth Duster – 1972 Graphics

By | | , , , , , , , , , ,
Leave a comment

If you read the title you might have thought that I’d be giving you some information on the graphics that were available on the Plymouth Duster, but it’s just the opposite.

I’m looking for some information on the graphics for the car pictured below to restore a similar car.   What were the factory graphics options on Plymouth Dusters?  In the picture below, is this an option or custom work?

 

Thanks in advance.

Tim

#ProjectSportsRoof

#ProjectBeepBeep

Project BeepBeep Gets Re-Hinged – Wrap Up

By | | , , , , , , , , , ,
2 Comments

The 68 Road Runner gets the bottom hinge replaced. Bill toss a few good tips in for completing this project.

 


 

Thanks Bill – great tips in this one.

Thanks everyone for reading the blog. Check back for more on #ProjectBeepBeep and #ProjectSportsRoof.

Tim

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …
73 Mustang (Project SportsRoof) Engine Dress Up and Venting/Vacuum

Did you think I sold #ProjectSportsRoof?  Nope.  I’ve been busy and I’ve been serving as editor to another cool project – my constant reader Bill’s ’68 Plymouth RoadRunner (#ProjectBeepBeep). However, I have been doing some work on the sports roof and in this video you’ll see a little bling under the …
Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …
Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …

#Project BeepBeep Gets Hinges – Prt 1

By | | , , , , , , , ,
Leave a comment

Welcome back to Average Guy’s  Car Restoration.

Bill’s 68 Road Runner get a new lower door hinge. Some great tips here!

 

A close up of the hinges.

The upper hinge.

Door gap.

Part 2 is coming up and check in on the other article on AVG Car Restoration.

Thanks for reading.

Tim

#ProjectSportsRoof
#ProjectBeepBeep

 

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

Feb 2, 2017 … I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to …

Average Guy’s Car Restorations, Mods, and Racing

Bill tries out a custom set of spark plug wires for #ProjectBeepBeep. Bill has more coming up on his 68 Road Runner and I might just have something to post of …

Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Feb 12, 2017 … Ready for some more #ProjectBeepBeep? Bill takes you through a few tips for restoring your B-Body door panels. Take a look: Great stuff!!!

Project BeepBeep – A look at the Brakes

Mar 10, 2017 … Introducing #ProjectBeepBeep – Code H 1968 Road Runner. I’d like you to take a look at one of my constant readers classic muscle car.

 

Update on Transmission for Project SportsRoof – ’73 Stang

By | | , , , , , , , , , , , ,
1 Comment

Spend a few hours on this 2017 Labor Day, laboring over #ProjectSportsRoof and I wish that labor paid a bit more dividends.

The goal was to mate the transmission back to the engine but unfortunately that just wasn’t going to happen today.  The engine is set back a bit too far and tilted (on purpose).  Problem is if I bolted them up the engine hoist would be able to lift the engine and trans due to the height I needed the car to work on the transmission.

So I pulled the transmission out from under car and placed its wheels back on the concrete.

 

It was a major effort to get the car up high enough to get the transmission out.  I pushed the boundaries of safety with a floor jack and a couple of jack-stand.

As I stated in the video I may just take it down the street and have them get that straightened out for me.

More to come on #ProjectSportsRoof.

Thanks for reading.

Tim

 

1973 Mustang Project SportsRoof – Exterior Walk-Around

Welcome back to #ProjectSportsRoof.  I run my car projects much like I run my IT projects.  You always have to know where to start and know the end game.   As with any project that isn’t being built from scratch, in other word, you have to work with what you’ve got, …
1973 Mustang – Engine Bay Work

If you look back at #ProjectSportsRoof post you’ll see the condition engine bay.  During those videos I mentioned that I was going to clean it up and hit it with a rattle can.  Again this isn’t going to be a concours restoration, it’s going to look nice and it’s going …
1973 Mustang – Project SportsRoof – Compression Test Part II

This is the wrap up on the compression testing for the 1973 Mustang w/ a 1972 351 Cleveland power plant. You’ll might have notices that I referred to the remote tester, which is my code for remote starter…yeah…that’s it!!! All of these tests were dry test and I should have done a …

Project BeepBeep Gets Some Spark!

By | | , , , , , , , , , ,
Leave a comment

Bill tries out a custom set of spark plug wires for #ProjectBeepBeep.

 

Bill has more coming up on his 68 Road Runner and I might just have something to post of on the Corvette and the #ProjectSportsRoof.

Thanks for reading.

 

Tim

#ProjectSportsRoof

#ProjectBeepBeep

Introducing #ProjectBeepBeep3 – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …
Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep4?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …
Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep5 and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …
Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep6. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …

 

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

By | | , , , , , , , , ,
2 Comments

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.

 

Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body shop and I can tell you that the chemicals in the automotive paint back then and now, will dry out rubber parts, making them brittle and they will crack and break as they did on Project BeepBeep.

Oh, if you were wondering how BeepBeep’s seats came out after the “restuffing”   (:^O)   here’s a shot.  AWESOME.

 

Thanks for reading.

Tim

 

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …
Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …

Project SportRoof – Transmission Update

By | | , , , , , , , , ,
2 Comments

It’s been a while but the new career is smoothing out and I’m hell-bent on getting back to my Mustang project.

Here is where we are with the drive train…going backward is necessary sometimes to get moving forward again.

 


 

HEY FOUND THEM:

 

 

More Coming Up on #ProjectSportsRoof.

Thanks for reading.

Tim

 

 

projectsportsroof

73 Mustang (Project SportsRoof) Engine Dress Up and Venting …

Mar 15, 2017 … Did you think I sold #ProjectSportsRoof? Nope. I’ve been busy and I’ve been serving as editor to another cool project – my constant reader Bill’s …
Average Guy’s Car Restoration, Mods and Racing – Rebuild Them …

#ProjectSportsRoof has been…languishing a bit but I have a new transmission jack and I’ll be back to it in the next week…right now it going to be about 120 …

Project BeepBeep – Seats, Windows and Panels…Oh My!

By | | , , , , , , , , ,
2 Comments

Welcome back to #ProjectBeepBeep!

Bill is going from bumper to bumper over his 1968 Road Runner and taking care the things that need attention.

This time he’s looking at the floors, seats and rear side panels as well as smoothing out the quarter windows regulators.

 


 

Consider using the proper tools when you remove upholstery panels.

These tool are available at many auto parts stores or on-line.

 

 

Here Bill is giving us a quick look at the issues with the seats and how to transport them safely.


 

Thanks for view the blog!! Bill will be back soon and maybe after I get these 600 7th and 8th Graders’s papers graded I’ll get some time for #ProjectSportsRoof.

Tim

 

projectbeepbeep

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …
Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …
Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

Project BeepBeep 68 RoadRunner – Splash Shield and Antenna Projects

By | | , , , , , , , ,
2 Comments

Thanks for check back on #ProjectBeepBeep, Bill’s 1968 Plymouth RoadRunner!!!

After getting the brake converted Bill has been tackling some other little projects. Take a look at the splash shield and antenna mini-projects:

 


Here a look a some of the stills from the project.

The seal to force more air into the radiator and not under the hood!

Quick look a the guide/supporting wire on the end of the antenna.

Rubber Splash Shield (front)

Rubber Splash Shield (back)

Fitting up the rubber seal.

In place!

OK!!! THAT’S ENOUGH. PUT THE WHEELS ON AND I GIVE ME A RIDE!!!

Super nice work, Bill!!!!

And more little projects coming up!!

Thanks for reading.

Tim

68 Ply RoadRunner (ProjectBeepBeep) Dash Update – YouTube

May 11, 2017 … Bill sent out the circuit board that supplies the power to the all dash components on #ProjectBeepBeep.
Introducing #ProjectBeepBeep – Code H 1968 Road Runner

Feb 2, 2017 … I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to …
Average Guy’s Car Restorations, Mods, and Racing

Welcome back to the #ProjectBeepBeep. We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner. Did I say this …
Project BeepBeep – A look at the Brakes

Mar 10, 2017 … Introducing #ProjectBeepBeep – Code H 1968 Road Runner. I’d like you to take a look at one of my constant readers classic muscle car.
restored car | Tumblr

Welcome back to #ProjectBeepBeep. Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 7 Bench Bleeding and More

By | | , , , , , , , , , ,
1 Comment

Welcome back to #ProjectBeepBeep!

Bill is trying to finish up this the disc brake conversion and as things happen when you are dealing with our mechanical best friends, when you think its ready to go, things go south.

Look for the discussion on Dot 3 and Dot 5 brake fluid and tips for creating your own brake bleeding system.  And keep an eye out for DIY master cylinder bench bleeding tubes.

All excellent to note!!  Oh…and dig out that jack!!!

 


 

Lots more coming up on Project BeepBeep, so check back often.

Thanks for reading.

Tim

projectbeepbeep

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …
Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …
Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …