Now 1946 generally wasn’t that exciting as far as new car models. The war just ended and the many of the car manufacturers were recovering from the wartime conversion, they had a lot of Uncle Sam’s money, but no much time to make “new” tooling for creating new sheet metal. So many of the cars were just spruced up. Chrysler was not different.
Their main offerings was the Royal series, Windsor series, the Saratoga series and the New Yorker series. The Royal cam in 3, 6 and 8 passenger and a Limo!!! The Windsor came in 3, 6, 8 passengers and the Town and Country tossed in there was a 2 door convertible. The Saratoga came in 3 and 6 passenger and the New Yorker came in 3 and 6 passenger and the Town and Country 4 door and 2 door convertible.
1946 Convertible
46 Royal
There engines were basically 6 cylinder and 8.
The Royal and Windsor engines was an L6. It had a cast iron block with a bore and stroke of 3.438 x 4.5. It displaced 250.6 cubic inches and had a compression of 6.6:1 (not huge when the shipping weight was 3,000 plus). It was able to produce 114 hp and sported four main bearings, solid lifters. It was topped with either the Fluid Drive (B-B VE1 – Ev2) or Vacumatic (E7L4) carb.
The Saratoga and New Yorker had an L8. This engine too, had the cast iron block, but displaced 323.5 cubic inches and sported a bore of 3.25 and a stroke of 4.875 inches producing 6.7:1 compression. With the 5 main bearings, solid lifters and topped with B-B E7A1 carb could produce 135 hp.
Remember a few post ago that covered MOPAR’s in Sweden? (Short Link: http://wp.me/pKHNM-174) I wrote how interesting it was to see US sheet metal in other countries.
Well check out this car show in Rothrist, Switzerland. This is from Andres Palomares who lives in Bern, Switzerland. There are some great examples of US car history in this show.
Switzerland is beautiful and visited Interlaken several times while living in Europe.
Thought I’d share this. It’s amazing how many and the variety of US cars made in the 50’s and 60’s made it overseas. It’s also very interesting what they do with them. Check out these MOPARs in Sweden. Way Cool!!!
You can always tell a car guy by looking in his garage and seeing what he has in there. If you see a couple of cars, that’s could be your first clue. But when you see muscle cars from the 60’s and 70’s, and engines on pallets, car lifts, stickers from internet performance shops, and various parts on the shelves, then you know that garage isn’t the run-of-the-mill garage.
Looking at Anders Ohlin’s garage in Sweden lets you know that this guy is into cars and performance – particularly Mopar performance. His collection of Mopar muscle cars is enough to make you drool.
Anders collection is interesting, and he says that some of his cars are the only ones that he knows of in Sweden. He considers himself a fanatic, as do many of his friends. Just looking at the pictures in his garage and you can see that he likes to surround himself with performance.
Some of his cars include a 1958 DeSoto Fireflite with a 361 Wedge, a 1965 Dodge Coronet A990 Super Stock Clone with a race HEMI that he imported in 2010, a 1964 Dodge 440 that has a 426 Wedge with dual carbs, a 1962 Chrysler 300 Sport Coupe that appears to have a 413 with dual carbs, and also a 1964 Dodge 330 to round out the cars we know of.
You can check out the YouTube video and see him moving his 1964 Dodge 330 around the garage. It’s a very healthy sounding Mopar, and if the deep rumble of that exhaust doesn’t sound like music to your ears, then you need to turn your speakers up!
I find the interaction between automakers an interesting topic to investigate. Either out of just pure collaboration, strategic partnership or partial complete ownership the results of these relationship produce some cars that were awe-inspiring and some that were “what the ‘H’ were they thinking??!!! This car falls somewhere in between. The U.S., U.K., Japan and Italy intermix I found very interesting.
The Chrysler TC as jointly developed with Maserati and became available in late-1989 with only some 7,300 units manufactured in Milan, Italy when production ended in 1991. Lee Iacocca‘s friendship with the late Alejandro De Tomaso whilst at Ford, which had led to the development of the De Tomaso Pantera. With Iacocca in the 1980’s now heading Chrysler and De Tomaso now the owner of the legendary Maserati brand, the two men decided to create a sports car between the two companies which became the TC by Maserati with Chrysler having become an investor in Maserati at that time. The engine was assembled by Maserati and has a Maserati-branded cast valve cover with the 200HP 16-valve 2.2 L ‘Maserati’ engine’s cylinder head being cast in the UK at the iconic Cosworth plant and then finished in Milan by Maserati. The ‘Maserati’ engine used a specially-made 2.2 block, upgraded crankshaft and rods. A Japanese turbo-charger was used. The rest of the engine used common Turbo II parts manufactured in the USA. The special wheels were made in Italy by Formula One supplier Fondmetal.
The TC featured a removable hardtop with port holes or opera windows as they were referred to and a manually operated cloth lined soft top that was available in either tan or black. For the 1989 model year, interior leather colors were either ginger or bordeaux. Exterior colors were only available in yellow, red or cabinet. The TC’s dash, door panels, seats, armrest, and rear facia panels were all covered in hand-stitched Italian leather. Inside door jambs were finished with stainless steel panels and sill plates. The convertible boot over which the hardtop rests is a body color keyed metal panel. A special interior storage compartment came with an umbrella, tool kit, and small spare tire that allowed the use of the full-sized trunk even with the top down. Standard equipment included a 10-speaker AM/FM cassette stereo, power windows, 6-way power seats, power door and trunk locks, map lights, puddle lamps, cruise control, and tilt steering wheel. Total production for each model year was 7,300 cars with only 3,764 built-in 1989 and with extraordinary base prices starting at $33,000 in 1989 and rising to $37,000 in the last year of production only three years later in 1991. The TC was sold by only 300 selected Chrysler dealers.
The TC
89 TC – look familiar? Take a look at the LeBaron below.
The LeBaron – same shape and front end. Even the honeycomb wheels.
The question is – the TC a Maserati design or Chrysler design?
In my opinion the real watering down of the brand occurred in the 80’s under the ownership of de Tomaso, with the launch of Biturbo (and all the models based off of it) and the Chrysler TC by Maserati. TrollHater 5pts. Its possible. Look at how watered …
Anonymous said… I’ve only seen these in grandma yellow. Wikipedia sez it was available in yellow, red or cabernet. Which means…yellow, red or red. Go figure. February 2, 2014 at 6:44 PM · Tony Piff said… bah. i know ben …
Long before Fiat took the reins at Chrysler, the Chrysler TC by Maserati was a shining example of Italo-American industrial cooperation. Easily the finest luxury car of its time — perhaps even the entire 20th century — it is now …
The wooden frame was white ash (adding structural rigidity to the doors and deck lid), fitted with interlocking miters. Mahogany veneer plywood filled the spaces within the frames.
Now that is craftsmanship!!!!
The engine was the Spitfire Straight Eight with 323.5 cubic-inch displacement and 135 horsepower coupled to a fluid drive transmission.
135 HP
The convertible was the most favored of the Town and Country line with 8,368 sold. In 1948, the price tag showed $3,395.
I got this idea from our friend Joe in Florida. Thanks, Joe, for the pictures and the reminder of some these great iconic cars.
I’ve always admired the workmanship that went in to the older cars that had wood components and have always disliked the simulating wood on cars with plastic molding and contact paper stuck on the horrible quality 1970’s and 1980’s station wagons was supposed to be a retro look (but only at 15 feet away) and cool (well as cool a station wagon was back then). I recall working in my father’s body shop and how much “fun” it was to put that contact paper back on Ford station wagon. In this mini series “Gorgeous “Wood Vehicles” I’m going to pick a year and toss you a few facts about the cars that came ‘in wood’.
Wood was used a lot in the auto industry, from all wood wheels to just the spokes to entire frames and interiors (like dash boards and steering wheels). Some of the best uses known uses were on the outside and truck beds. They were often referred to as ‘Woodies” either correctly or incorrectly, be most of us know that the term relates to cars with real wood on the outside. These are the cars I’m going to look in this series. For no particular reason, other than this was the first picture Joe sent, I’m starting with the year 1948.
A major reason for using wood was the shortage of raw materials and labor issues for producing steel/sheet metal. This was the case in 1948, just a few years after the end of World War II.
Nearly all of the major producer had models that had external wood components. This 1948 Chevy was one.
1948 Chevy.
This is the two door Fleetwood Aerosedan, but Chevy also made an 8 passenger station wagon the Model 2109 Fleetmaster. This year’s model set the record for Chevrolet woody production with 10,171 wagons built. Both Cantrell and Iona built bodies to fill the demand for the last Chevrolet wagon with structural wood. The 1948 Chevrolet Fleetmaster Station Wagon was the last true woody (structured wood) from Chevrolet. What type of wood was used? Ash the wood used for the structural base, while mahogany was used for the panels. Leatherette was stretched over a wood frame to provide the roof. Approximately 10,171 were built between February 1948 and January 1949.
Most of these cars were powered by the Chevy Straight 6, 216 CID engine.
The 1948 Straight 6 216 engine (The 235 was very similar).
Engine specs:
Bore and stoke 3.5 x 3.75 (in); Displacement 216.5 (CID); Compression 6.50:1; Max Brake Horsepower 90 @ 3300 RPM; Max Torque 174 Lbs.ft. @ 1200 RPM
Packard was another manufacturer that produced woodies. They released their Twenty-Second Series cars. They were Packard’s first totally new models were since before World War II. The wood used was northern birch for the frame and maple panels. This was purely for looks, because the overall structure was braced by the metal body shell which actually was modified from the Standard Sedan Body, only the upper rear quarters which were removed from the sedan body used the wood as actual bracing. On the door sides and window frames the regular sheet metal was cut away in order to allow the wood to be inlaid, rather than just bolted on top. These were powered by the Packard’s L-head straight 8.
Some engine specs:
Bore x stroke 3.50 x 3.75 (in.); Displacement 288.64(cid); Horsepower 130 @ 3,600 rpm; Torque 226(lb-ft) @ 2,000 rpm; Compression ratio 7.0:1; Main bearings 5; Lubrication full-pressure; Carburetor Carter 2-bbl
automatic Choke; mechanical Fuel pump
We have Chrysler’s, and Pontiac’s 1948 woodies as well as a Bentley woody and Willys coming up next in this series.
The wait for the 2013 SRT Viper has only been about two years–since sales of the previous model ceased–but for fans of the venomous vanguard of American speed, it’s been a long one. The wait is drawing to a close now, and as we get closer, we get more of what to expect. Today, it’s the new Viper’s logo, dubbed “Stryker.”
Designed by Vince Galante, a Chrysler designer and Viper owner, the logo aims to capture the “sinister look and ‘evil grin’ of the original,” according to DriveSRT.
Previous logos were named Sneaky Pete and Fangs. Stryker follows in the theme with a stylized viper’s head, though the newest is the meanest-looking yet. As these sketches reveal, it’s born of the snake itself, but with a healthy dose of artistic interpretation.
While we don’t really think the badge has much to do with the car itself–they could have put a cupcake on the nose of the last Viper and it still would have been one of the meanest things on the road–the new direction fits our eyes well. Galante also notes that the new logo has some lines that reflect those of the car, too. What do you see?
So I’m read a few articles online and a few have touched on Fiat and all the issues they are apparently having with bring the brand back to the US. There are some individual that say the 500 won’t be back and that they tried too
soon or that they didn’t have any dealerships lined up to handle the turn. But I don’t really care much, I’ll never buy a Fiat, unless is an older classic, and then maybe….ummm…naaahh…not even then.
But I did notice that they are now offering a race ready version of the 500 Abarth. That’s right 160 hps of rubber melting power, not too bad when you are starting out with 101 hp. Drop a turbocharger and you’ll get 160. They
tuned the suspension for the track and its light curb weight might make it a bit fun to drive..might.
160HP..enough said...HEY..who snickered???!!!
But the cool part is that included in the price is a ‘Track Day‘. Supposedly you will get (I think car will be available in the spring) a day at one of the Richard Petty Driving Experience events. What would be really cool is if you could return it right after that!!!
Anyway, I got to thinking if any other auto makers offer a track day. We all know that the Big Three are making track ready cars’ some for track only and some for street and track. Here is what I found out.
Fiat got the idea from Chrysler. They are offering a track day with the purchase of some of their SRT models (300 SRT8 and the Challenger SRT8).
GM via Cadillac offers their own at various tracks across the country.
Purchasing a Corvette ZR1 will get you a trip to Ron Fellows Performance Driving School or Bob Bundurant School of High Performance Driving, in Chandler, AZ. (OK….even you can’t afford the ZR1, sell the spouse’s daily driver, rent out your man cave (gal cave) and go to the Bundurant school.) They have a lot of classes at all levels and some fair prices. I did the Formula 1 event at Phoenix International Raceway (PIR) and it was outstanding. Here is a link: http://www.bondurant.com/?gclid=CJD93Luc2K0CFQduhwodNyU1mQ
2012 ZR1 Vette
Not to be out done Ford as a similar deal with the 2012 Boss Mustang. This is at the Miller Motorsports Park in Tooele, Utah. I chatted with one of the Miller Motorsports reps at the 2011 Barrett-Jackson Classic Car Auction in Scottsdale and he showed off some video of their facility and it is extremely nice. I’d make that trip.
2012 Boss 302
If you got to have an “import” (and the Fiat ain’t doing it for ya) Mercedes-Benz will be offering a track day at course across the US if you purchase their top of the line models. (Although I didn’t find mention of which ones.)
So if you are going to spring for a new car, you’ve got some options if a Track Day is part of the deal. Of course the Fiat will run you about $22K and the ZR1 about $108K, tough choice?
Ok match this one up the 2013 Dart in the previous post.
What would rather pruchase?
Engine: 3.8-liter V-6 now goes Direct Injection, which helps bump the horsepower to 348 and torque to 295 lb-ft (using premium fuel).
BUT TIM!!!..COME ON NOW. The Dart only has 4 cylinders!!! True!!!
So for the Genesis – 2.0-liter inline-four is now paired with a twin-scroll turbocharger and improved intercooler, with that yielding 274 hp and 275 lb-ft, again with premium fuel.
by 
aunik_aronno
