Category Archives: Car Restoration

Old Part “To Keep or Not To Keep” That is the Question

By | | , , , , , , , , , , , , , , ,
Leave a comment

I’m always reading where a guy had replace every part on his car and saved all the old parts.  As with all things there is line of demarcation.  What made me think of this was the new front end of the Mustang and a previous conversation when I was needed to rebuild the transmission for the 2nd time in the Corvette.

I was pretty fed up with the T400R (I’ll share the story when I talk about the mods for the Vette in another post).  I had trouble with it when I first got it —only 32K miles,  and then a horrible rebuild and on the second rebuild I was considering just replacing with another level 2.  A fee of the guys from the Corvette club (ACE) that I belong to encouraged me to keep the old trans because it would be important at some point to have the matching number trans.

I’ve read were some have even kept old sheet metal because of the part number and the new after market ones don’t have that.  But there can’t be much value in having an old front valance for my Mustang laying around..ya think?  (Ok..fine I do still have it and it does have the original part number on it..but I wouldn’t put it on again.)

So saw no reason to keep the old control arms no value in that.

BTW I had the Corvette transmission rebuilt.  This really leads me to another topic I read about in a car magazine.  The topic was survivor cars or the most original.  That one later.

Thanks for reading.

Tim

Missed Car Show – Mustang Front End – Closure.

By | | , , , , , , , , , , , , , ,
6 Comments

We all love closure and especially when it ends well.

Mustang is back from the shop. Buying the control arms ahead time saved a few dollars.  HINT:  If you know you need a part, but not right away, but you have the funds (too many buts???) look for a sale.  I’m continually sent emails with discounts from Mustang parts places.  I purchased these on an email and got free shipping.  What I didn’t have was the spring perches.  Luckily I found them at a local place that specializes in muscle cars and in particular Mustangs.  They ran about $80 for the pair. 

 While they had  a part I splurged for a set of shocks…no labor because they had it apart already. (Hint:  More savings!!)

So I drove over to pick it up and drive it around the corner to the tire place and got two new tires tossed on.  I can’t believe the difference the new front end makes.  Took it out for a drive.  This car is nearly done. 

Side note:  I’m enjoying this Blogging thing.  Although we are light on the comments..Mr. Sears is always helping out there, it’s good fun.

Got to give a shout out to a loyal reader…HEY PDAWG!!!  Get me that pic of your garage!!!!

Restoration vs. Restromod

By | | , , , , , , , , , , , , , ,
1 Comment

There has never been a clear understanding between these two ways keeping a car alive.  Perhaps is not so much an understanding issue as to a delineation of the fine line between the two.

I do agree that there is a difference.  Clearly if one were to take a 1970 Camaro and put 1989 front end on it, or a Ford 8 bolt rear end and 351 Cleveland that’s a restro-mod.  A couple of car shows ago I saw a 1967 Ford Mustang with a Corvette engine (LS1) shoved under the hood.  Oh..hey..I have pics…here’s one and there on at the bottom of this post.


I spoke to the owner and asked him “why” to which he responded “Because I could.”

 

Sometimes it’s pretty easy to know when to call it a restoration or a restromod.  But what about finer changes, cosmetic, or safety changes.

I mentioned, in a previous posting, that a judge called my Mustang a restromod. Which I was take back a bit by.   I started thinking about after I posted that and  I’m going to have to agree with him and here is why.

I believe the swapping of the 250 for a 302 wasn’t the problem (unless your definition includes a requirement for a matching year block …I’m sure mine isn’t from 1970 at least not the short block)  or the dual exhaust.  The Center Line wheels…. maybe.  Now the rear spoiler and the Mach I mirrors might be where I crossed the line.  You couldn’t have purchased a coupe with those items, as far as I can tell with the research I’ve done.  But aren’t we now just talking about accessories, like dice hanging from the mirror or a locking gas cap?

Now what if there was just a brake change (drum to disk) for upgrade for safety, or seat belts added or something as simple as steel belted tires.

Where would you draw the line?  Drop me a comment and let me know.

 

Thanks for reading.

Tim

Dream Car, What’s yours?

By | | , , , , , , , , , , , , , , ,
1 Comment

Yeah…I know it’s tough to pick…but what if you could pick two cars and the criteria was..1 old and 1 new (last two years)?

What you choose?  Drop a comment and to this post and let me know.

Mustang Front End – Why I missed the Car Show

By | | , , , , , , , , , , , , , , ,
Leave a comment

Well the news was pretty good.  Since I had the control arms already, I was only missing the spring seats (sometimes called perches) and a new set of shocks and I’m good to go – Labor $300.00 I was thinking much worse.

Tim Sisk asked when I was going to sell the car to him.  I laughed..he laughed and I said..HOW MUCH???  He laughed some more.

Need to pick up the parts Monday and get some new tires.  Good to go.

Missing Car Show “The rest of the story”

By | | , , , , , , , , , , , , , , ,
Leave a comment

The joys of owning a classic muscle car are numberous.  Restoring one takes some planning and forethought. errkkk……….having said that..it doesn’t take a genus to know that a 40-year-old car with nearly 200k miles on the body/frame and suspension might need stuff.

Well the tire problem I discovered was the direct cause of defective tire and serious wear (they aren’t that old).  The wear is a bit disturbing because of the limited miles I’ve driven it.

About 10 months ago I started feeling the typical sloppiness that a front gives you when it needs some attention. So I ordered upper and lower control arms, which wasn’t a budget buster, mainly because I’d planned on install them myself (labor is will kill the budget).  I stuck them away until I had time.  Well doing a little research I realized that for this Mustang I didn’t have the tools get the job done so I delayed it a bit longer.

I drive the Mustang to work a couple times a week (maybe) and on the weekend run errands.  So the front had to be much worse to do that much wear in those miles. I took it over a fellow Mustang owners shop (actually we recently sold it Mustang so he’s Stangless right now).

eeeeerrrrrrrrrrrkkk…………ok I have to say that this guy is partner/manager for a “chain” auto repair company.  I won’t say which one because, I normally won’t take my cars to such establishments. But I met Tim Sisk 3 years ago when I needed a quick oil change on the Mustang and I stopped in. We talked about Mustangs and I found him to be extremely knowledgable. So I had them to a few things for me.  It worked out great and now when I can’t do something on my own with Mustang and even a few on the Corvette I’ll take it there. Another benefit is that the place is two miles up the road.

I tossed the upper and lower control arms in the trunk and took the Mustang there this morning.  We put it up on the lift and sure enough the control arms needed to be replaced.  I’m sure there will be a few more things I’ll need and most likely they’ll have to be ordered and if I can swing a good deal on the labor I’ll have some shocks put on as well. 

So standby for the $$$$.  I’ll post it when I get the news.

Oh..there are lots places to get Mustang parts.  I happened to pick up the control arms from WSD. Worldwide Suspension Distribution LLC.

Thanks for reading.

Tim

Restore or Mod it all cost money

By | | , , , , , , , , ,
Leave a comment

Money, cash, coin, bucks, what ever you call it’s the 900 lbs monkey sitting in the passenger seat right next to you!!!!

This can be tough.  Us average guys, have to “pinch pennies until Lincoln calls the cops”. Even then there is a lot of …free time..between mod or new parts.  Am I right?  You betcha.

You’ve heard the stories, that start out…”Yeah..and to sell her.” or “Got a family started.” or “Had to move and no place for the car.”

I wonder about the guys that say…”I have too many projects.” I’m thinking 40% of them ran out of money and then ‘honey’ said that it has got to go.

I don’t have a direct solution for your money problems and I won’t tell you anything you don’t know or haven’t already read about. What I will say is take your time. Work on it as often as possible, even if you are just wiping it down or cleaning a part. That way you don’t “loose” touch so to speak.

What is important is to keep track of what you spend, keep receipts, and spreadsheets are good for that. Why is it important?  For a couple reason:

1.  Most of us average guys are on a budget.  Keep one for your car.  Get prices ahead of time and match that up with your “real world budget” the one you keep to eat/pay the mortgage/utilities.

2. Investment purposes. It’s good to know how much you’ve spent.  That’s a big deal if you were to…go head winch now…you know what’s coming resell.

3.  Insurance – especially if it’s collector car insurance. Most will let set a value.  I have this for my Mustang.

errk…..story time!!!!!  When I first got the Mustang, I called my regular insurance company, told them I purchased a collectable car and I wanted to insure it.  They asked me how much it cost when it was new. I said $2,984.20. The gal on the other end of the line said “Then that’s how much we’ll insure it for.” as if it were a done deal.  So be careful.  I use Hagerty..they are great.  Remember my story about the kid that hit my Mustang….the paid for it all and kept sending checks when ever the amount went up.

Ok..more tomorrow.

Don’t forget about the Clean and Disaster Garage contest.  $25.00 gift card…..hey..it’s extra money!!!!

Thanks for reading.

Tim

Car Shows Judging

By | | , , , , , , , , ,
1 Comment

There are basically two categories professional and average guy judging.

Now I must confess here I don’t understand the professional, there is just too much to know.  I frankly don’t know how some the of the larger shows can finish the judging – especially the contours judging.   Whether there are the proper pre-assembly marks and  is there the proper over-spray in the right places.  I suppose thats great in some respects and I guess is can see the necessity.

But I’m the average guy muscle car owner.  I like what I like and being judged by average peeps is ok by me.  I’d like them to have some car knowledge but it’s still not that necessary.

I found it interesting that at one of the medium size shows one guy called the Mustang a Restro-mod.  I wasn’t sure how I felt about that.  It’s period – meaning it could have been ordered that way at the time. Only real change is the larger tires and Center Line wheels.

The latest Hemming’s Classic Car issue has interesting reading on the subject of “original/survivor cars” vs “everything else”  I’ll do another post on that topic later on.

Couple of admin notes:

1.  If I mention a product or a publication it’s because I have an opinion or an “experience” with it.  This is a non-commercial blog. As of write now I don’t have plans to have ads embedded, click throughs or sell “stuff” .

2.  Send me comments. Post them up here or email them to me timsweet@cox.net.

3.  I don’t sell contact info either or send spam email.  If you email me that’s as far as your info goes.  I’ll even ask you if you mind having me post email contents before I do.

DON’T FOR GET THE CLEAN GARAGE/DISASTER GARAGE CONTEST.  $25.00 GIFT CARD IN THE BALANCE. GET ME THE PICS.

Corvette Auto Cross Firebired International Raceway

By | | , , , , , , , , , ,
Leave a comment

This event was a smash hit.  So much fun. I’ll jot more later, but a lot of fast cars and good people.

By best time 34.89…not bad for no mods yet.  Left the course only once.  NO cones were killed by my C4.

Here

Before the race

a pic.  Still processing the video…and yes I’ll post the of me losing it.

The Non-Mechincal Hurdles of Restoring and Modifying Cars (cont.)

By | | , , , , , ,
Leave a comment

So I left off with perhaps one of the worse fears, breaking it yourself.

Having it broken by someone else is only slightly better, YOU didn’t do it, so you can be mad at someone and chances are the signification other will lighten up, especially when they find you sobbing uncontrollably, laying on the hood your classic.

I have had that experience with my Mustang. Since kids might run across this blog I won’t use the language I might normally, when relaying this next incident.

I had just gotten the engine conversion done and I was happy.  Some work on my part and fair amount of money got me to where the car had the power it needed. I’ll talk more about the modification and conversion later on.  I think I had the car back for a couple months and one day…a rainy day….errk………..I live in southern Arizona ….what manner of horrible luck can you have to deserve such crappy timing?  I was only a  mile from home and I stopped at a red light.  10 cars in front me and as I waiting with them, I glanced in my rear view mirror.  There I see a small white pick-up in the distance coming my way.  As I watched, I realized that he was coming pretty fast.  A nano second later I was 100% sure he wasn’t going to stop.  I shoved the clutch in, dropped her in to first, cranked the steering wheel to the right, hit the gas and popped the clutch.  Well, the additional power I longed for, now realized…spun the rear wheels, in what normally would have been an enjoyable manner, but right that minute I was wishing for the straight 6 again…(well..maybe not exactly).   I was just able to nose the Mustang’s front end way from the car in front of me when I looked up and saw…(this was all happening in extremely slow motion – right now just playing it in my head..it seems like ten minutes at least) this white pickup starting to stop and then I felt the slam from behind.  The force pushed the Mustang past the car in front of me by 3/4 of a car length.  If I had not gotten the few precious inches just before the tires began spinning, I would have destroyed my 3 month old bored out 302 and all the hard work that went into the engine bay, electrical, and new AC would have been for naught.

Ok I’m going to stop here for the now.  More tomorrow.

One more day until Corvette Auto X day.  Taking my son with me, he’ll be grabbing some vids and pics that I’ll share.

Thanks for reading and thanks for being able to read!!!!

Tim