Next up we have Hornet Six and the Hornet Twin-H Six.
The Hornet Six was a cast iron power plant and displaced 308 CID. Like all the Hudson 6 cylinders this was an in-line L-head. This had 3 – 13/16 bore and 4.50″ stroke and a compression ratio of 7.5:1 and with a two barrel Carter carb (WDG Model 2252S) it would be the Hornet down the street with 165 hp.
Here a commercial image of the Cater WGD carb.
The Hornet Twin-H Six is basically the same engine, same displacement, bore and stroke, but this was topped with 2 WA-1 Carters (Model 2113S) one barrel carbs. This set up helped it reached 175 hp.
Think there was much of a choice of engines back in 1956? Well there were a few for the 1956 Hudson.
As was custom back in the 40’s and 50’s, the engines were often named similar to the model of the car they powered. For the 1956 Hudson, the company had the Hudson Rambler, Wasps and Hornet. The engines followed suit for the most part. There were 5 six cylinder versions and 2 V8s.
The first up is the Hudson Rambler Six. This was an in line 6 L head with a displacement of 195.6 cid. It was a cast iron block with bore of 3 1/8″ and stroke of 4.25″
and a compression ratio of 7.5: 1. The four main bearings, solid valve lifters and 1 barrel Carter Carb (YF model 2009s) combined to produce 120 horse power.
’56 Hudson Rambler In Line Six
The Wasp Six was a In Line L-head 6 cylinder. It to was a cast iron block same compression ratio 7.5:1. Its bore and store was larger than the Hudson Rambler – 3.00 x 4.75 (vs. 4.25) and it manged to displace 202 cid without a change in hp still at 120. The engine came from the factory with a Carter one barrel WA-1 carb (2009s).
The Wasp Twin-H Six was similar to the other Wasp except it managed 8.0:1 compression ratio with the help of the H carb configuration. This consisted of 2 Carter single barrel carbs (WA-1 model 2013s) that helped the 202 cid engine produce 130 hp.
One of the great things about cruising the back roads, is you’ll never know what you’ll run into. Case in point is this GM classic machine that we spied while passing through small town Richmond, Illinois. At first glance, you may assume the blue beauty is one of Pontiac’s GTO varieties or some sort of Chevelle creation. Give it a closer inspection and you’ll find a ‘BEAUMONT’ badge across the rear panel. This may be where you scratch your head. But dig deeper into your memories of General Motors’ history and mentally go North and soon you’ll uncover the identity of the four-wheeled cruiser.
Beaumont was the stand-alone marque GM used in the Canadian market from 1966-1969. The vehicles were sold through Pontiac-Buick dealers and utilized a slightly tweaked Chevrolet Chevelle body with some Pontiac Tempest/LeMans/GTO trim and interior bits thrown in. Even the badge was different to help set the cars apart from its US siblings. The Pontiac arrowhead design was used but incorporated two maple leaves.
As with anything, nothing lasts forever and in 1970 the Pontiac LeMans replaced the Beaumont model. This cobalt ’67 example looked ready to hit the highways and is sure to stand out at whatever cruise night or show it’s parked in.
Just about anyone can put together a car show; just throw a few flyers in car windows and tell people where to be. You are bound to have a couple cars show up. However, it takes a whole lot more than that to create an extravaganza that everyone from around the country hears about and is willing to cruise cross-country to attend.
Call me crazy, but I love these cars. I have only seen one in running condition and it was well restored. I’d love to own one.
The Jensen Interceptor debuted in 1966, but not originally – that was back in 1950 (I’ll cover those in a separate post.). These hand-built in Kelvin Way Factory, West Bromwich in the England from 1966 – 1976. The body style designed by Carrozzeria Touring of Italy and changed from fiber glass bodies to steel.
1966 Jensen Interceptor
1967 Interceptor
So what was this car made of? Let’s take a look.
Engines:
These cars were by….wait for it…………………..Mother MOPAR!!!
Yup these cars sported a Chrysler V8. The Mks I – III used either the 6.3 or 7.2 liter engines.
The 1966 started with the 383 CID which continued through 1970 knocked out 335 hp. The 383 was nurtured in 1971 dropping down to 250 hp. So Jensen decided to use the 440. They offered to versions, one had a 4bbl Carter carb making about 305 hp. The second was topped with three 2 barrel Carters and pushed 330 hps out of the block – we know this engine as the 440 Six Pack – only 232 of these were produced.!!!
In 1972 the 440 suffered the same fate as the 383 – the Six Pack was no longer available and the 4 barrel was de-tuned to 280 hp and again in 1976 dropped to 255. Jensen continued to use the engines.
Transmission:
The Jensen team selected the Chrysler’s TorqueFlite 727 automatic (3 speed) and 4 speed manual.
The curb weight was between 3500 – 3600 hundred pounds (about the same as a 1969 Cuda).
Other features:
Electric windows
Reclining front seats
Wood rimmed steering wheel
Radio with twin speakers
Reversing lights
Electric clock
Power steering (after Sept ’68)
Jensen produced the Mk I, MK II and MK III from 1966-1974. They came in 2 door convertible, hatch back and coupe.
Jensen Interceptor ‘Vert
Power specs: 0-60 in 6.4 seconds and top speed 137 mph (oh…I’m betting it would do better than that).
From Wikipedia:
Variants
A convertible with powered soft top was introduced in 1974 mainly intended for the American market but also sold in Europe. 267 convertibles were made.[3]
Rarer still is the Coupé version with just 60 made,[3] derived from the convertible and therefore without the distinctive rear window of the regular car that was introduced in 1975, a year before the company’s demise.
Jensen were one of the first manufacturers to equip a production car with four-wheel drive, in the 1967 Jensen FF (Ferguson Formula). At the time it was hailed as a remarkable development, coming also with Dunlop Maxarat mechanical anti-lock brakes and traction control. The car is five inches (127 mm) longer than the Interceptor, and although looking virtually the same the extra length is identified by an additional side vent ahead of the doors on the front flanks, an extension to and additional swage line in the leading edge of the front wing (fender). Press articles from the time quote “drag-strip” performance when describing the car. In total 320 FFs were produced; 195 Mark I, 110 Mark II and 15 Mark III. [4]
The Jensen Interceptor R
A Jensen specialist based at Cropredy Bridge rebuilds original Interceptors using modern components.
In May 2010, Jensen International Automotive was set up, with the financial backing and know-how of Carphone Warehouse founder and chairman Charles Dunstone who joined its board of directors. A small number of Jensen Interceptor Ss, which had started production under a previous company, are being completed by Jensen International Automotive (JIA), in parallel with JIA’s own production of the new Jensen Interceptor R; deliveries of the latter have started (beginning of 2011) at the Oxfordshire-based manufacturer and restorer. Tony Banham is JIA’s Managing Director.
The New Interceptor? Jensen Interceptor XL concept!!
