6/2/1899 – Locomobile Co. Founded – they were in business until 1929. They made a lot of cars, I hadn’t realized that. Here are a couple.
1901 Locomobille - Cool..wonder what the 1/4 mile time were??
Love this one..Steam powered????
1923 48 Series Sport
6/3/1864 Ransom Olds was born in Ohio. He developed and build cars named after him, Oldsmobile and REO (his middle name was Eli, hence REO, hey that was a band name REO Speedwagon.
An Reo Speedwagon
I’ve never heard of the next guy, until now and did a little reading.
Barney Oldfield was born 6/3/1878. He was a race car drive, but started out racing bike and wining silver medals in the process. Here are a couple pics:
Early 1900's
Oh Yeah..that Henry Ford standing next to his car.
I attended the Bowling Green Assembly Plant tour today. It was really!!!!! awesome!!!!!
Corvette Assembly Plant Bowling Green, KY
The walk from the parking lot to the plant was filled with the smell of new car. They must pour it out of every chimney and window.
They were building the Z06’s, ZR1 and Grand Sports…a lot of Grand Sports!!! (that is a damn nice car!!!) Amazing!!!! Sorry no pictures were allowed.
Seeing all the parts everywhere and the hanging panels and frames…was a sight to be hold.
The tour was pretty quick..well maybe an hour…but I could have hung there all day!!! I lagged behind the tour group and spoke with a couple of the workers.
At one stop, where they fill the newly married body, chassy and engine with fluid, the tour guide was going blah, blah, blah and I was looking over the cars and one of the guys walked over asked me if I had one picked out yet. He said they seemed to be selling a lot of GS’s. I asked him about the fender stripes and he said they normally just get tossed in the back and the dealership installs them. He asked me if I liked the wider body and I said what’s not to like!!!!
We watched them marry up a Zo6’s mufflers, while another guy stuck in the tail lights and then on to the chassy. Tire position was at a stop.
Actually got to watch a new Grand Sport come off the line and run over the ‘suspension’ activation section (floor) and then into the section where they align the headlights.
We got to see a Z06 enter the final test chamber where they run 200 + tests in two minutes. This one passed.
It was MOST EXCELLENT!!!! (Wayne’s World).
The NCM was good, but the plant tour overshadowed it…by far. I’ll post up pics from the NCM in the next post.
Brooklyn bridge opened for traffic on 5/24 1883 and the Golden opened 5/27 in 1937.
Race car driver Mauri Rose was born 5/26/1906 currently in the racing hall of fame, placed second in the 1927 Indy 500. Actually won the Indy in 1941, but that was a tough victory, spanning two Maserati-powered Elgin Piston Pin Specials cars, after the first one had mechanical issues. He tossed a fit and the car owners pulled one of the other drivers on the time from the race and give Rose that car.
The Pin
Elgin Pin
What powered that thing?
Power Plant
The first Kaiser-Frazer was produced 5/28/1946 – cars weren’t sold until 1947.
I was about to start the pillar moldings mini project when I ran into a couple mechanical issues.
About a week ago the Mustang began squealing when pushed to high revs. That normally indicates one of several problems.
1. It could be a water pump
2. It could be the power steering pump
3. It could be a pulley
4. It could be a bolt that was holding the alternator bracket to the engine worked itself out and was in contact with the fan belt.
5. It could be a combination of the any of these.
Now the Mustang did, every once in a while, drip some fluid from the power steering control value but it wasn’t a huge deal.
Well, Saturday I went to start her and the battery was dead. It’s over 3 years old and I had left the lights on the day before and had to have it jump started. So off to the auto parts store I went and pick up a new 3 year battery and stuck it. When I started the engine up, it made the squeal and I decided I needed to fix this, before the pillar molding.
So with a neighbor revving the engine I noticed the bolt protruding from the water pump/block ( it passes through left side water pump housing in to the block). With the revs the fan belt would flex and briefly hit the bolt. This bolt was “custom” made when we were fitting everything up to reman’ed long block and was about 7 or 8 inches long.
It took a bit to get that back in place, had to loosen up the alternator’s other two supports and toss a little loctite on the threads and she was good to go…..almost…..
Yeah….option #5 above was the correct answer BTW.
Started it up and there was still a squeal – not the same squeal but clearly an ‘accompaning’ squeal. Shortly after that a power steering hose let go and well liquid does what gravity make it do and I spent the afternoon cleaning the driveway. So there went my allotted time for Saturday. So replacing both hoses seem the best way to go and they’ll be in today. Right now it’s at the shop down the street, I had no time to undertake this task at the moment, will be traveling the next couple weeks.
One of my travels takes me to the National Corvette Museum. I’ll spend an entire day there which include the assembly plant tour.
I grab every book I think is useful in any of my hobbies. I happened to be at the mall the other day and had some time kill and wonder down to Borders books store. Pick up a book entitled “Ultimate American V-8 Engine Data Book” 2 Edition by Peter Sessler, published MotorBooks.
This book has engine identification codes, component casting codes, internal dimensions and specs, and power and torque ratings.
It goes back as far as 1952 and covers Fords, GM, Mopar, and AMC, Packard and Studebaker. It includes big blocks and small blocks. There is a lot of information.
I learned from this book that all of the engines possible for the Corvette in 1984 were rated @ 205 hp. The CFI was the main power supplier, but it also had listed a couple TPI’s (engine suffix code ZFC), TBI (engine suffix code ZFJ – supposedly for export only) and a 4v for California (engine suffix code ZFF).
They also inform you of the transmissions that go with the engines.
There are listings for cylinder heads parts or casting # as well as intake and exhaust manifolds as well.
I think this one is worth the $30.00.
This is a great transition to introduce an up and coming feature for this blog.
I love engines…(duh). To me the history of development, what was used when and where and maybe even why can be fascinating. I’ll be tossing out specs and the like and hopefully some, ” I would have never guessed that” information. Now, I don’t have this all in my head, it will be researched stuff or some experiences. (My 1974 Torino was a good case study..tell you the story soon).
So let’s get to my runs. As I mentioned, there were 2 sets of runs, one for time and points and one for just time. Each was five trips on the course.
One thing they have you do is of course walk the track which is to get you someone familiar with the corners. I walked it twice. Once on my own and once with the novice “coach”.
This is my second auto cross. If you’ve been a constant reader you might recall that was on Jan 25 2010 and it was mainly corvettes. We rented the area and set up our course. I did fairly well there for my first time. But this course was different. A lot tighter corners in a row and two sets of very tight slalom. Nothing a vette couldn’t handle with the proper speed and a good surface..this was not a good surface, however.
My first run was a darn right awful. I look like some crazed speed demon with a severe hatred for orange cones. I over drove every tight corner. My second run wasn’t much better, I didn’t even hit the first corner and then a took a cone for a ride under the vette.
So now I feeling like a knucklehead. I had the oldest car there and maybe the one with the most torque, but certainly not the most horse power. My third run was better and I took along one of the novice coaches but I still had a CD (course deviation) on the backside by missing the second slalom set of cones. I dropped off the novice coach and my 4th and fifth runs were clean as far as CD’s go but I still got a cone on each run.
So here is how it end up in the first set of 5 runs.
My next runs were much better. I did have on CD and I did get a cone, but the times were getting better. The 5th run below I took a cone and spun on the back side of the course.
1. 51.643
2. 53.146
3. 52.622
4. 51.645
5. 54.188
So I ended the day with the following times and points.
PAX Time Points
46.260 753
43.575 796
PAX time is like a handicap in golf, it takes the class of your car and the skill level reduces your time to keep you somewhat competitive.
Not bad for my first real “formal” event.
By the end of the I was worn out. That is a lot of driving, in the heat (ok..only 88 degree..little hotter on the course).
The vette performed perfectly, no over heating issues (one of my biggest fears) and nothing broken, did have to rub out a few cone marks….but I showed them whose boss!!!!
You’ll notice a lack of pic or vids on this one, didn’t have my son along as a camera man, and when I wasn’t running they put you to work resetting cones.
So the other cost I mentioned will be in the area of tires.
In this event I just ran with my street tires 255/50 ZR 16 BFG GForce Sport and stock rims (only chrome). There was a lot of tire spinning and some smoking. The surface of the track was…well lets just say less the optimun..ok…fine…it was horrible. (You could toss in a few cuss words in front of horrible and you wouldn’t be over dramatizing.) It was black top, cracked, uneven and there was grass and weeds growing on the far end. The tires looked rough when I finished the 10 runs. Too many more events (this was the second auto cross on these tires) and I think I’d have to replace them.
So that really means that to protect the street tires and the chrome rims, I really ought to have an other set of tires and rims. Now you are talking money that many of us average guys aren’t going to spring for. This is true for vette owners..tires are not cheap for the older vettes. Not so for my co-worker running his Civic, they are reasonable.
Take my C4 the tires and the Wheels are uni-directional. Not unusual for tires, but my 1984 C4 rims only go one way and are labeled left front, right front and the same for the rear. I do have the original set of rims that I will eventually restore to the factory aluminum and clear coat, but right now they would for auto crossing. But the rubber can run upwards of $700.00 and if I put racing rubber on it, according to SCCA rules it will change my class.
The last cost is the “I broke it cost.” They could be just about anything on a car that’s racing. Anything mechanical, brakes (oh..they will wear out a lot faster in auto cross…or at least the way I do it!!!!), undercarriage, right down to the dreaded “cone damage”. (yeah…yeah….I know you aren’t suppose to hit them…I know the object of the race..but man did I kill some of them ‘good’..no doubt!!!) I did no damage to the vette but I did see a Evo that took out a portion of his front air dam.
In fact the vette performed flawlessly, only problem was the driver. I’ll get to that next blog. You’ll laugh and I’ll give you my times and points and we’ll talk about PAX times and classes.
The name of my blog includes “racing”. This isn’t meant to be watching on TV and reporting back, it’s meant to be my events. My blog title also includes “Average” and includes budget as well. (You might as well include ‘time’, as in average amount of time to spend on the hobby.)
I just finished running a Sports Car Club of America (SCCA) event. It was a blast!! I’ll get to my times in a bit, but first, let’s talk about cost of this particular event.
Straight up to join SCCA there is the yearly fee for the national membership and there is the fee for your regional membership. Total cost here was $80.00. Now the events are not free. In my regional club which run events in the Tucson areas and Phoenix as well, they have to offerings. They have a round for points and time and they have the time only round. There are separate prices for each.
Today when I showed up (you can pre register and save ..I think…$10.00) filled out all the paper work and went to pay. The fellow taking the money asked if I wanted “time only” and I’m thinking…do I only want to be timed…so I said “No.” and he said “That will be $30.00.” So I paid.
Now I have co-worker who talked me into joining SCCA and he attends regular events at the local drag strip – the auto cross is held in the huge drag pit/parking area. He cleared up my misunderstanding and said if I wanted the “full” experience I need to go back and say yes I wanted the ‘time-only’ round as well. That cost me another $10.00.
So putting this together we are at 120 big ones this month to race. Not too bad, I’d have to say.
There are more costs and I’ll get to that in next portion of this subject.
I’ve worked on the gas delivery systems in my Vettes and Mustangs. This always involves removing gas lines from the carb or throttle bodies and of course the possibility of leaks after re-installing them. One of the last things you want is gas leaking here and there in your engine bay..NOT GOOD!
I’ve always use teflon tape to wrap the threads.
Teflon Tape on one of the Corvette’s fuel lines.
This helps seal the connection, and sometimes with older cars you need that was the threads aren’t bad enough to replace….errk…Getting new fittings and flaring the gas lines is sometimes necessary and can be a pain..but if threads are really worn, take the time to do that. Yes..I know cutting the lines and get correct type hose and some clamps you’ll be fine…but it won’t look as good and since both of my car are trophy winners at car shows, I try to keep them looking professional.
Using the tape does have a of couple drawbacks. It can form a lip around the gas line opening, partially blocking the flow. Additionally, pieces can tear off during installation and get into the system. So some companies offer a thread sealer in a tube, which is made of Teflon in paste form. I’m using that next time I have to go into the fuel systems. I know that Permatex makes some (what don’t those people make!?!?!!?!). They call it thread sealant and it comes in different “models” like High Performance and High Temperature.
The last I blogged about my Mustang I had finished up the installation of the new dash pad and replaced all the bulbs and cleaned up a few years of dust.
If you recall (well you don’t have to, just go back and read the posts) I talked about planning and how I could have saved time by waiting to put new dash pad on (not cap, pad) until the pillar molding came, but I decided not too. The molding came in today….so out with the old….
Old cracked and broken
And in with the new:
New
Mustang Unlimited
I have pretty good luck with Mustang Unlimted’s parts and service. I recommend them. (No I don’t get paid for plugs or compensated.)
These will have to be painted which is very common with interior parts. I even had to paint the replacement arm rest. I have the paint and I’ll post up the entire process.
I finally got the exhaust manifold taken care of (I didn’t do it). But apparent when I had the custom exhaust with hooker headers created and installed, they didn’t use locketight and they loosed up with the vibration of daily and drag strip racing. The right side had to be replaced and the left side was just tightened. Oh she sounds so much better.
Thanks for reading. I’ll get the pillar molding replacement pretty quick.
